Page Comparison

WSO2 EMM stores and maintains the details of the registered devices. The registered devices communicates communicate with WSO2 EMM to retrieve the list of operations that are queued up at the server and . When when getting the list of pending operations that needs to be executed on the device, the device shares the device information and the details of the operation that has been executed on the device, with the server.

...

To achieve this a task needs to run in the background of the WSO2 EMM server, which will add operations to the devices, such as device_info, device_location and application list. If you wish You You need to configure WSO2 EMM to get this task running in the back ground .as mentioned below:

Open the cdm-config.xml that is in the <EMM_HOME>/repository/conf directory.

Configure the fields under the <TaskConfiguration> tag .

Enable: Assign true as the value to get the task running at the EMM server background.
Frequency: Define the frequency at which the server should receive the details of the devices registered with WSO2 EMM.
Operations: Defines the Operations such as, device_info, device_location and application list.
Info
If you wish to define more operations when retrieving the details of the devices, you can add more operations under the operations tag.
Operation: The field used to define each operation for the task.
Name: The Operation Code. For example, the operation code to retrieve the device information is device_info.
RecurrentTimes: Define how often the operation should be added to the task.
Example: If you define the value as 5, it indicates that you need add the operation at every 5th run of the task.

Code Block

title	Sample Configuration

<TaskConfiguration>
   <Enable>true</Enable>
   <Frequency>30000</Frequency>
   <Operations>
      <Operation>
         <Name>DEVICE_INFO</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>APPLICATION_LIST</Name>
         <RecurrentTimes>5</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>DEVICE_LOCATION</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
   </Operations>
</TaskConfiguration>

Expand

title	Click here for more information on adding an additional operation

Add a new operation within the <operations> tag.

Code Block

<TaskConfiguration>
   <Enable>true</Enable>
   <Frequency>30000</Frequency>
   <Operations>
      <Operation>
         <Name>{Define the operation code}</Name>
         <RecurrentTimes>{Integer}</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>DEVICE_INFO</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>APPLICATION_LIST</Name>
         <RecurrentTimes>5</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>DEVICE_LOCATION</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
   </Operations>
</TaskConfiguration>

Example: Adding the operation <PUT OPERATION NAME HERE>

Code Block

<TaskConfiguration>
   <Enable>true</Enable>
   <Frequency>30000</Frequency>
   <Operations>
      <Operation>
         <Name>{Define the operation code}</Name>
         <RecurrentTimes>{Integer}</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>DEVICE_INFO</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>APPLICATION_LIST</Name>
         <RecurrentTimes>5</RecurrentTimes>
      </Operation>
      <Operation>
         <Name>DEVICE_LOCATION</Name>
         <RecurrentTimes>1</RecurrentTimes>
      </Operation>
   </Operations>
</TaskConfiguration>

...

Versions Compared

Old Version 3

New Version 4

Key