Page Comparison

...

Add or update the host name mapping list.
Puppet adds the required host entries explicitly in the /etc/hosts file in the Puppet Agent. For this purpose you have to update the hosts mappings appropriately in one of the following Hiera data files (YAML file) based on the pattern that you are using.

/etc/puppet/hieradata/<environment-name>/wso2/wso2am_runtime/<pattern-number>/default.yaml
/etc/puppet/hieradata/<environment-name>/wso2/wso2am_runtime/<pattern-name>/common.yaml

Localtabgroup

Localtab

active	true
title	Pattern 0

If you are using pattern 0, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-0/default.yaml file.

Code Block
wso2::hosts_mapping: api_manager: ip: 127.0.0.1 name: am.dev.wso2.org

Localtab

title	Pattern 1

If you are using pattern 1, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-1/default.yaml file.

Code Block
wso2::hosts_mapping: api_manager: ip: 127.0.0.1 name: am.dev.wso2.org

Localtab

title	Pattern 2

If you are using pattern 2, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-2/default.yaml file.

Code Block
wso2::hosts_mapping: apim_analytics_server: ip: 192.168.57.29 name: analytics.dev.wso2.org api_manager: ip: 127.0.0.1 name: am.dev.wso2.org

Localtab

title	Pattern 3

If you are using pattern 3, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-3/common.yaml file.

Code Block

wso2::hosts_mapping:
  apim_keymanager:
    ip: 192.168.57.186
    name: km.dev.wso2.org
  apim_store:
    ip: 192.168.57.21
    name: store.dev.wso2.org
  apim_publisher:
    ip: 192.168.57.219
    name: pub.dev.wso2.org
  apim_gateway:
    ip: 192.168.57.216
    name: mgt-gw.dev.wso2.org
  apim_gateway_worker:
    ip: 192.168.57.247
    name: gw.dev.wso2.org
  apim_traffic_manager:
    ip: 192.168.57.35
    name: tm.dev.wso2.org
  svn:
    ip: 192.168.100.1
    name: svn.gw.am.dev.wso2.org
  apim_analytics_server:
    ip: 192.168.57.29
    name: analytics.dev.wso2.org

Localtab

title	Pattern 4

If you are using pattern 4, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-4/common.yaml file.

Code Block

wso2::hosts_mapping:
  apim_keymanager:
    ip: 192.168.57.186
    name: km.dev.wso2.org
  apim_store:
    ip: 192.168.57.21
    name: store.dev.wso2.org
  apim_publisher:
    ip: 192.168.57.219
    name: pub.dev.wso2.org
  apim_gateway_manager:
    ip: 192.168.57.216
    name: mgt-gw.dev.wso2.org
  apim_gateway_worker:
    ip: 192.168.57.247
    name: gw.dev.wso2.org
  apim_traffic_manager:
    ip: 192.168.57.35
    name: tm.dev.wso2.org
  svn:
    ip: 192.168.100.1
    name: svn.gw.am.dev.wso2.org
  apim_analytics_server:
    ip: 192.168.57.29
    name: analytics.dev.wso2.org
  apim_gateway_manager_dmz:
    ip: 192.168.57.5
    name: dmz-mgt-gw.dev.wso2.org
  apim_gateway_worker_dmz:
    ip: 192.168.57.218
    name: dmz-gw.dev.wso2.org

Localtab

title	Pattern 5

If you are using pattern 5, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-5/common.yaml file.

Code Block

wso2::hosts_mapping:
  apim_store:
    ip: 192.168.57.21
    name: store.dev.wso2.org
  apim_publisher:
    ip: 192.168.57.219
    name: pub.dev.wso2.org
  apim_gateway_manager:
    ip: 192.168.57.216
    name: mgt-gw.dev.wso2.org
  apim_gw_plus_km:
    ip: 192.168.57.247
    name: am.dev.wso2.org
  apim_traffic_manager:
    ip: 192.168.57.35
    name: tm.dev.wso2.org
  svn:
    ip: 192.168.100.1
    name: svn.gw.am.dev.wso2.org
  apim_analytics_server:
    ip: 192.168.57.29
    name: analytics.dev.wso2.org

Localtab

title	Pattern 6

If you are using pattern 6, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-6/common.yaml file.

Code Block

wso2::hosts_mapping:
  apim_keymanager:
    ip: 192.168.57.186
    name: km.dev.wso2.org
  apim_publisher_plus_store:
    ip: 192.168.57.21
    name: am.dev.wso2.org
  apim_gateway:
    ip: 192.168.57.216
    name: mgt-gw.dev.wso2.org
  apim_gateway_worker:
    ip: 192.168.57.247
    name: gw.dev.wso2.org
  apim_traffic_manager:
    ip: 192.168.57.35
    name: tm.dev.wso2.org
  svn:
    ip: 192.168.100.1
    name: svn.gw.am.dev.wso2.org
  apim_analytics_server:
    ip: 192.168.57.29
    name: analytics.dev.wso2.org

Localtab

title	Pattern 7

If you are using pattern 7, update the following section in the /etc/puppet/hieradata/dev/wso2/wso2am_runtime/pattern-7/default.yaml file.

Code Block
wso2::hosts_mapping: api_manager: ip: 127.0.0.1 name: am.dev.wso2.org identity_server: ip: 192.168.57.35 name: is.dev.wso2.org

Add the Well Known Address (WKA) list for Gateway clusters and Publisher-Store cluster.
The required configurations for clustering are already added, but you need to update the WKA IP addresses in the respective Hiera data files based on your deployment.

Note
This is not applicable to patterns 0, 1, 2, and 7 as those patterns do not have Gateway or Publisher-Store clusters.

Localtabgroup

Localtab

active	true
id	pattern3
title	Pattern 3

There are 2 clusters in the pattern-3 deployment. Update the Well Known Address (WKA) list for the clusters as follows:

Publisher-Store cluster
This is a cluster of the Publisher node and the Store node. Update the WKA list in both the api-publisher.yaml and the store.yaml files with the IP addresses of Publisher and Store nodes.

Code Block
wka: members: - hostname: 192.168.57.219 port: 4000 - hostname: 192.168.57.21 port: 4000

Gateway cluster

This is a cluster for the Gateway Manager node and the Gateway Worker node. Update the WKA list in both the gateway-manager.yaml and gateway-worker.yaml files with the IP addresses of Gateway Manager node and the Gateway Worker node.

Code Block
wka: members: - hostname: 192.168.57.216 port: 4000 - hostname: 192.168.57.247 port: 4000

Localtab

id	pattern-4
title	Pattern 4

There are 3 clusters in the pattern-4 deployment. Update the Well Known Address (WKA) list for the clusters as follows:

Publisher-Store cluster
This is a cluster of the Publisher node and the Store node. Update the WKA list in both the api-publisher.yaml and the store.yaml files with the IP addresses of Publisher and Store nodes.

Code Block
wka: members: - hostname: 192.168.57.219 port: 4000 - hostname: 192.168.57.21 port: 4000

Gateway cluster

There are 2 Gateway clusters in this pattern. One is in the ENV1 and the other one is in the ENV2. Each of those clusters consist of a Gateway Manager node and a Gateway Worker node.

Configure the Gateway cluster in the ENV1
Update the WKA list in both the gateway-manager-env1.yaml and gateway-worker-env1.yaml files with the IP addresses of Gateway Manager node and Gateway Worker node in the ENV1.
Code Block
wka: members: - hostname: 192.168.57.216 port: 4000 - hostname: 192.168.57.247 port: 4000
Configure the Gateway cluster in the ENV2
Update the WKA list in both the gateway-manager-env2.yaml and gateway-worker-env2.yaml files with the IP addresses of the Gateway Manager node and the Gateway Worker node in the ENV2.
Code Block
wka: members: - hostname: 192.168.57.5 port: 4000 - hostname: 192.168.57.218 port: 4000

Localtab

id	pattern5
title	Pattern 5

There are 2 clusters in the pattern-5 deployment. Update the Well Known Address (WKA) list for the clusters as follows:

Publisher-Store cluster
This is a cluster of the Publisher node and the Store node. Update the WKA list in both the api-publisher.yaml and the store.yaml files with the IP addresses of Publisher and Store nodes.

Code Block
wka: members: - hostname: 192.168.57.219 port: 4000 - hostname: 192.168.57.21 port: 4000

Gateway cluster

This is a cluster for the Gateway Manager node and the node that has the Gateway Worker together with the Key Manager. Update the WKA list in both the gateway-manager.yaml and gw-plus-km.yaml files with the IP addresses of Gateway Manager node and the node that has the Gateway Worker together with the Key Manager.

Code Block
wka: members: - hostname: 192.168.57.216 port: 4000 - hostname: 192.168.57.247 port: 4000

Localtab

id	pattern6
title	Pattern 6

There is one cluster in the pattern-6 deployment. Update the Well Known Address (WKA) list for the cluster as follows:

The Gateway cluster is a cluster for the Gateway Manager node and the Gateway Worker node. Update the WKA list in both the gateway-manager.yaml and gateway-worker.yaml files with the IP addresses of Gateway Manager node and the Gateway Worker node.

Code Block
wka: members: - hostname: 192.168.57.216 port: 4000 - hostname: 192.168.57.247 port: 4000

Modify all the MySQL based datasources in the respective Hiera data file (YAML file) that corresponds to the pattern you are using in order to point to the external MySQL servers.

Note
This is not applicable for pattern 0 as `pattern-0` uses a H2 database.

Update the following in the /etc/puppet/hieradata/wso2/wso2am_runtime/[pattern-number]/default.yaml file for patterns 1, 2 and 7 and /etc/puppet/hieradata/wso2/wso2am_runtime/[pattern-number]/common.yaml file for patterns 3 to 6.

You need to only replace the IP address, with the IP address of database server that you are using.

Note
If you want to use any other database except MySQL, update the data sources appropriately.

Code Block

title	Example:

   wso2_am_db:
      name: WSO2_AM_DB
      description: The datasource used for API Manager database
      driver_class_name: "%{hiera('wso2::datasources::mysql::driver_class_name')}"
      url: jdbc:mysql://192.168.57.210:3306/apimgtdb?autoReconnect=true
      username: "%{hiera('wso2::datasources::mysql::username')}"
      password: "%{hiera('wso2::datasources::mysql::password')}"
      jndi_config: jdbc/WSO2AM_DB
      max_active: "%{hiera('wso2::datasources::common::max_active')}"
      max_wait: "%{hiera('wso2::datasources::common::max_wait')}"
      test_on_borrow: "%{hiera('wso2::datasources::common::test_on_borrow')}"
      default_auto_commit: "%{hiera('wso2::datasources::common::default_auto_commit')}"
      validation_query: "%{hiera('wso2::datasources::mysql::validation_query')}"
      validation_interval: "%{hiera('wso2::datasources::common::validation_interval')}"

Create following database scemas in MySQL server. The databases need to be created in each of the pattern is listed below.

Names of the databases that need to be created	Description
`apimgtdb`	database used for managing APIs
`configdb`	database used for config registry
`govregdb`	database userd for gov registry
`userdb`	database used for user management and user store
`mbstoredb`	database used for message broker
`statdb`	database used for getting statistics for API Manager

Note
Addition to that if you are using pattern-6, create analyticseventstoredb and analyticprocesseddatastoredb which are used for Analytics recode store.

You need to run MySQL database scripts for following tables as mentioned below.

database script

apimgtdb

<API-M_HOME>/dbscripts/apimgt/mysql.sql

Note
If you are using MySQL 5.7 or later version, select mysql5.7.sql located in same directory without using mysql.sql script.

configdb

<API-M_HOME>/dbscripts/mysql.sql

Note
If you are using MySQL 5.7 or later version, select mysql5.7.sql located in same directory without using mysql.sql script.

govregdb

<API-M_HOME>/dbscripts/mysql.sql

Note
If you are using MySQL 5.7 or later version, select mysql5.7.sql located in same directory without using mysql.sql script.

userdb

<API-M_HOME>/dbscripts/mysql.sql

Note
If you are using MySQL 5.7 or later version, select mysql5.7.sql located in same directory without using mysql.sql script.

mbstoredb

<API-M_HOME>/dbscripts/mb-store/mysql-mb.sql

Note

You do not need to run the database scripts agains following databases as the database tables of them will be created at runtime.

statdb
analyticseventstoredb
analyticprocesseddatastoredb

If you are using a MySQL database, make the following changes:
1. Download and copy the mysql driver jar (mysql-connector-java-5.1.39-bin.jar) to the locations /etc/puppet/environments/production/modules/wso2am_runtime/files/configs/repository/components/lib and /etc/puppet/environments/production/modules/wso2am_analytics/files/configs/repository/components/lib in Puppet Master.
2. Uncomment the file_list entry for JDBC connector JAR in the relevant hiera data files.
  Code Block
  wso2::file_list: - "repository/components/lib/%{hiera('wso2::datasources::mysql::connector_jar')}"
3. Update the JAR file name appropriately if your file name is not mysql-connector-java-5.1.39-bin.jar, which is set as the default value.
  Code Block
  wso2::datasources::mysql::connector_jar: mysql-connector-java-5.1.39-bin.jar

Configure deployment synchronization in each of the Gateway related nodes.
Use one of the following methods to carry out this configuration.

Rsync

Note

WSO2 recommends rsync instead of SVN, for deployment synchronization as it is an efficient, easy to use and lightweight solution compared to SVN.

Why can't I use SVN based deployment synchronization (Dep Sync)?

WSO2 has identified some inconsistencies when using Hazelcast clustering. As a result, from API-M 2.1.0 onwards WSO2 API-M has been designed so that it is possible to deploy API-M in a clustered setup without using Hazelcast clustering, so that users can use Hazelcast clustering only when absolutely necessary. However, if you use deployment synchronization as a content synchronization mechanism, you are compelled to use Hazelcast clustering. Therefore, WSO2 does not recommend using SVN based deployment synchronization.

If you prefer to use rsync, see Configuring rsync for Deployment Synchronization.

SVN Based
Make the respective SVN based configurations in the following files based on the pattern that you are using.

Pattern	Files to Update
Pattern 3	`/etc/puppet/hieradata/wso2/wso2am_runtime/pattern-3/gateway-manager.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-3/gateway-worker.yaml`
Pattern 4	`/etc/puppet/hieradata/wso2/wso2am_runtime/pattern-4/gateway-manager-env1.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-4/gateway-worker-env1.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-4/gateway-manager-env2.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-4/gateway-worker-env1.yaml`
Pattern 5	`/etc/puppet/hieradata/wso2/wso2am_runtime/pattern-5/gateway-manager.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-5/gw-plus-km.yaml.yaml`
Pattern 6	`/etc/puppet/hieradata/wso2/wso2am_runtime/pattern-6/gateway-manager.yaml /etc/puppet/hieradata/wso2/wso2am_runtime/pattern-6/gateway-worker.yaml`

Uncomment the SVN based deployment synchronization configurations in the following files based on the pattern and update the configurations where required.
Patterns 3 to 6 are configured for SVN based deployment synchronization; however, the configurations are commented out by default.

Code Block

title	Example

wso2::dep_sync:
    enabled: true
    auto_checkout: true
    auto_commit: true
    repository_type: svn
    svn:
       url: http://svnrepo.example.com/repos/
       user: username
       password: password
       append_tenant_id: true

Copy the required JARs for SVN, into the respective locations.
1. Copy the svnkit-all-1.8.7.wso2v1.jar into the <PUPPET_HOME>/modules/wso2am/files/configs/repository/components/dropins directory.
2. Copy the trilead-ssh2-1.0.0-build215.jar into the <PUPPET_HOME>/modules/wso2am/files/configs/repository/components/lib directory.
3. Uncomment the file_list entries for the latter mentioned two JAR files in the respective Hiera data files related to gateway nodes.
  Code Block
  wso2::file_list: - "repository/components/dropins/svnkit-all-1.8.7.wso2v1.jar" - "repository/components/lib/trilead-ssh2-1.0.0-build215.jar"

Versions Compared

Old Version 22

New Version 23

Key