Page Comparison

...

Open a new terminal, go to <CEP_HOME>/samples/consumers/axis2-log-service and run the command below. It builds the sample axis2 log service and deploys in the axis2 repository that is relevant to the sample.
Code Block
ant -DsampleNo=0105
See the logs in CEP server when logger service is deploying. For example,

After deployment, the Web service is able to receive messages sent from the CEP server. Next, let's create a topic in the local broker and subscribe LogService on that topic to receive output events from the CEP server.
Go to the management console and select the Try this service option . (Main --> Services )

Then you will redirected to a UI shown below, then change the endpoint and body as shown below and click on send.

Endpoint - http://10.100.0.44:9763/services/SoapInputAdaptor/ATMTransactionStats
Body - Event 1

Code Block

<body>
	<atmdata:ATMTransactionStatsStream xmlns:atmdata="http://samples.wso2.org/">
		<atmdata:ATMTransactionStat>
		<atmdata:CardNo>ED936784773</atmdata:CardNo>
		<atmdata:CardHolderName>Mohan</atmdata:CardHolderName>
		<atmdata:AmountWithdrawed>80</atmdata:AmountWithdrawed>
		<atmdata:TransactionTime>PDT 11:00</atmdata:TransactionTime>
		<atmdata:Location>Newyork</atmdata:Location>
		<atmdata:BankName>Bank of Newyork</atmdata:BankName>
		<atmdata:AccountNo>8957836745</atmdata:AccountNo>
		<atmdata:CardHolderMobile>9667339388</atmdata:CardHolderMobile>
		</atmdata:ATMTransactionStat>
	</atmdata:ATMTransactionStatsStream>
</body>

Similarly send the following ATM stat events as well through the try it feature.

Event 2

Code Block

<body>
	<atmdata:ATMTransactionStatsStream xmlns:atmdata="http://samples.wso2.org/">
		<atmdata:ATMTransactionStat>
		<atmdata:CardNo>BC78946623</atmdata:CardNo>
		<atmdata:CardHolderName>John</atmdata:CardHolderName>
		<atmdata:AmountWithdrawed>1000</atmdata:AmountWithdrawed>
		<atmdata:TransactionTime>PDT 01:00</atmdata:TransactionTime>
		<atmdata:Location>California</atmdata:Location>
		<atmdata:BankName>Bank of Wonder</atmdata:BankName>
		<atmdata:AccountNo>PDT 12:00</atmdata:AccountNo>
		<atmdata:CardHolderMobile>94729327932</atmdata:CardHolderMobile>
		</atmdata:ATMTransactionStat>
	</atmdata:ATMTransactionStatsStream>
</body>

Event 3

Code Block

<body>
	<atmdata:ATMTransactionStatsStream xmlns:atmdata="http://samples.wso2.org/">
		<atmdata:ATMTransactionStat>
		<atmdata:CardNo>GH679893232</atmdata:CardNo>
		<atmdata:CardHolderName>Tom</atmdata:CardHolderName>
		<atmdata:AmountWithdrawed>900</atmdata:AmountWithdrawed>
		<atmdata:TransactionTime>PDT 02:00</atmdata:TransactionTime>
		<atmdata:Location>Texas</atmdata:Location>
		<atmdata:BankName>Bank of Greenwich</atmdata:BankName>
		<atmdata:AccountNo>783233422</atmdata:AccountNo>
		<atmdata:CardHolderMobile>98434345532</atmdata:CardHolderMobile>
		</atmdata:ATMTransactionStat>
	</atmdata:ATMTransactionStatsStream>
</body>

Event 4

Code Block

<body>
	<atmdata:ATMTransactionStatsStream xmlns:atmdata="http://samples.wso2.org/">
		<atmdata:ATMTransactionStat>
		<atmdata:CardNo>ED936784773</atmdata:CardNo>
		<atmdata:CardHolderName>Mohan</atmdata:CardHolderName>
		<atmdata:AmountWithdrawed>15000</atmdata:AmountWithdrawed>
		<atmdata:TransactionTime>PDT 03:00</atmdata:TransactionTime>
		<atmdata:Location>Newyork</atmdata:Location>
		<atmdata:BankName>Bank of Newyork</atmdata:BankName>
		<atmdata:AccountNo>8957836745</atmdata:AccountNo>
		<atmdata:CardHolderMobile>9667339388</atmdata:CardHolderMobile>
		</atmdata:ATMTransactionStat>
	</atmdata:ATMTransactionStatsStream>
</body>

From the terminal opened when starting the CEP server, you can see the processed events which emitted by CEP.
For example, given below is part of the console output of the consumer when sending events through Try-it service.

Versions Compared

Old Version 2

New Version 3

Key