Page Comparison

Setting up MB instances in different machines

1. Download the latest version of MB and extract it into a folder.
2. Make an exact copy of that folder in three separate machines. Let's assume MB1 is in the machine with IP1, MB2 in the machine with IP2 and MB3 in the machine with IP3.
3. Start all the above instances by running one of the following commands:
   
   • <MB_HOME>/bin/wso2server.sh (on Linux) 
   • <MB_HOME>/bin/wso2server.bat (on Windows) 
   All severs will start with port offset 0, which is 5672.

Setting up a WSO2 ESB instance

1. Start ESB in the default port (port offset 0). This is possible if you used the single machine setup above, as those servers were started with different port offsets. If you are using different machines, use another machine to start WSO2 ESB. Instructions can be found in Configure with WSO2 Message Broker.

   Info
   It is not possible to start multiple WSO2 products with their default configurations simultaneously in the same environment. Since all WSO2 products use the same port in their default configuration, there will be port conflicts.

2. There is only a single difference to enable failover across the three brokers we have setup. That is when specifying the following:

   Code Block
   connectionfactory.ConnectionFactory connectionfactory.QueueConnectionFactory connectionfactory.TopicConnectionFactory

   For example, if you hope to use a single machine MB setup as described above,

   Code Block
   connectionfactory.QueueConnectionFactory = amqp://admin:admin@clientID/carbon?failover='roundrobin'&cyclecount='2'&brokerlist='tcp://localhost:5673 retries='5'&connectdelay='50';tcp://localhost:5674?retries='5'&connectdelay='50';tcp://localhost:5675?retries='5'&connectdelay='50''

   If you hope to use the broker setup made across several machines as described above,

   Code Block
   connectionfactory.QueueConnectionFactory = amqp://admin:admin@clientID/carbon?failover='roundrobin'&cyclecount='2'&brokerlist='tcp://IP1:5672 retries='5'&connectdelay='50';tcp://IP2:5672?retries='5'&connectdelay='50';tcp://IP3:5672?retries='5'&connectdelay='50''

    The parameters used above are described in detail below:

   Brokerlist option

   Code Block
   brokerlist='<broker url>[;<broker url>]'

   The broker list defines the various brokers that can be used for this connection. A minimum of one broker URL is required. Additional URLs are semi-colon(';') delimited.

   Broker URL format

    

   Code Block
   <transport>://<host>[:<port>][?<option>='<value>'[&<option>='<value>']]

   Option	Default	Description
   retries	1	The number of times to retry connection to this Broker
   ssl	false	Use ssl on the connection
   connecttimeout	30000	How long in (milliseconds) to wait for the connection to succeed
   connectdelay	none	How long in (milliseconds) to wait before attempting to reconnect

   Brokerlist failover option

    

   Code Block
   failover='<method>[?<options>]'

   Method	Description
   singlebroker	This will only use the first broker in the list.
   roundrobin	This method tries each broker in turn.
   nofailover	[New in 0.5] This method disables all retry and failover logic.

   
   The current default is to use the singlebroker method when only one broker is present, and the roundrobin method with multiple brokers. The method value in the URL may also be any valid class on the classpath that implements the FailoverMethod interface.

   Options

   Option	Default	Description
   cyclecount	1	The number of times to loop through the list of available brokers before failure.

Testing the setup