You can configure any type of JMS event adaptor adapter to run with CEP. We discuss WSO2 products. This guide discusses how to configure a few common types here. You can receive XML, Map, JSON and Text events using JMS transport.
Table of Contents | ||||
---|---|---|---|---|
|
ActiveMQ Input JMS
...
event adapter
Follow the instructions below to configure ActiveMQ Input JMS Event Adaptorevent adapter.
Install Apache ActiveMQ JMS Event Adaptor. This document is for event adapter.
makeInfo This guide uses ActiveMQ versions 5.7.0 or below. If you want to use a later version,
based on http://activemq.apache.org/activemq-580-release.html.Before starting the CEP, add the following activemq JMS-specific jars to <CEPfor instructions on the necessary changes to the configuration steps
, go to Apache ActiveMQ Documentation.
- Add the following ActiveMQ JMS-specific JAR files to
<PRODUCT_HOME>/repository/components/lib/
directory.<ACTIVEMQ_HOME>/ lib/activemq-core-xxx.jar
<ACTIVEMQ_HOME>/ lib/geronimo-j2ee-management_1.1_spec-1.0.1.jar
Start ActiveMQ and then start the CEP.
Be sure to start ActiveMQ before starting WSO2 CEPNote product.
You can configure this adaptor through the management console as explained below or by manually adding an XML file as explained in step 8.
- Log in to the CEP management console, go to Configure --> Event Processor Configs --> Input Event Adaptors and click Add Input Event Adaptor. Then select 'jms' as the Event Adaptor Type.
- Enter details in the form that appears and click Add Event Adaptor button at the end of the form. For example,
Following values are used in the configuration above:
No Format Event Adaptor Name : activemqJmsInputAdaptor Event Adaptor Type : jms JNDI Initial Context Factory Class : org.apache.activemq.jndi.ActiveMQInitialContextFactory URL of the JNDI provider : tcp://localhost:61616 Connection Factory JNDI Name : TopicConnectionFactory Destination Type : topic Enable Durable Subscription : false
- After a adapter is successfully added, you can change its configuration and redeploy it. To do this, click the Edit link associated with it. You can also click the other links associated with it to delete it or enable statistics and tracing.
- An XML based editor opens allowing you to edit the event adaptor configuration from UI itself, without having to edit the file in the file system. Do your modifications and click Update.
- Alternatively,
you can specify a event adaptor configuration using an XML file and save it inAnchor step8 step8 <PRODUCT_HOME>/repository/deployment/server/inputeventadaptors
directory, which is the Input event adaptor deployment directory. Since hot deployment is enabled, you can simply add/remove files to deploy/undeploy from the server.Create the XML file with the following WSO2Event event adaptor configurations. Input event adaptor implementation must start with
<inputEventAdaptor>
root element.Anchor AMQ AMQ Code Block language html/xml <inputEventAdaptor name="activemqJmsInputAdaptor" statistics="disable" trace="disable" type="jms" xmlns="http://wso2.org/carbon/eventadaptormanager"> <property name="java.naming.provider.url">tcp://localhost:61616</property> <property name="transport.jms.SubscriptionDurable">false</property> <property name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</property> <property name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</property> <property name="transport.jms.DestinationType">topic</property> </inputEventAdaptor>
JMS event adaptor can be configured with XML , Map, Json and Text input mapping.
Qpid Input JMS Event Adaptor
Follow the instructions below to configure JMS-Qpid Input Event Adaptor.
Install JMS-Qpid Broker and JMS-Qpid Client from http://qpid.apache.org.
- Before starting the CEP, add the following broker-specific jars to
<CEP_HOME>/repository/components/lib
directory.- < ACTIVEMQ_HOME>/ lib/geronimo-jms_1.1_spec-1.0.jar
- <QPID-CLIENT_HOME>/ lib/ qpid-client-xxx.jar
<QPID-CLIENT_HOME>/ lib/ qpid-common-xxx.jar
- Log in to the CEP management console, go to Configure --> Event Processor Configs --> Input Event Adaptors and then select 'jms' as the Event Adaptor Type.
- Enter details in the form that appears and click Add Event Adaptor button at the end of the form. For example,
Enter details in the form that appears and click Add Event Adaptor button at the end of the form. For example,
Following values are used in the configuration above:No Format Event Adaptor Name : QpidJmsInputAdaptor Event Adaptor Type : jms JNDI Initial Context Factory Class : org.apache.qpid.jndi.PropertiesFileInitialContextFactory (file-based JNDI properties) URL of the JNDI provider : repository/conf/jndi.properties Connection Factory JNDI Name : TopicConnectionFactory Destination Type : topic Enable Durable Subscription : false
Info This is the jndi.properties
file in<PRODUCT_HOME>/reposiyory/conf
directory. This example uses Topic Connection Factory. Therefore, the following entry points the default Qpid Host to localhost and port to 5672:
connectionfactory.TopicConnectionFactory = amqp://admin:admin@clientid/test?brokerlist='tcp://localhost:5672'
- After a adapter is successfully added, you can change its configuration and redeploy it. To do this, click the Edit link associated with it. You can also click the other links associated with it to delete it or enable statistics and tracing
- An XML based editor opens allowing you to edit the event adaptor configuration from UI itself, without having to edit the file in the file system. Do your modifications and click Update.
- Alternatively, you can specify an event adaptor configuration using an XML file and save it in
<PRODUCT_HOME>/repository/deployment/server/inputeventadaptors
directory, which is the Input event adaptor deployment directory. Since hot deployment is enabled, you can simply add/remove files to deploy/undeploy from the server.
Anchor step7 step7
...
You can configure JMS event adaptors with Map, XML, JSON and Text Input Mapping.
WSO2 MB as Input JMS Event Adaptor
Follow the instructions below to configure WSO2 Message Broker (MB) as a JMS-Qpid Input Event Adaptor.
Download and install Message Broker as described in the Message Broker documentation .
- Before starting the CEP, add the following JMS -specific JARs to
<CEP_HOME>/repository/components/lib
directory. If you plan to execute the Samples, add the JARs to<CEP_HOME>/samples/lib
directory as well.- <W SO2MB_HOME>/ client-lib/ andes-client-xx.jar
- <WSO2MB_HOME>/ client-lib/ geronimo-j2ee-management_1.1_spec-1.0.1xx.jar
You can configure this adaptor through the management console as explained below or by manually adding an XML file as explained in step 7.
Log in to the CEP management console, go to Configure --> Event Processor Configs --> Input Event Adaptors and then select 'jms' as the Event Adaptor Type.
Enter details in the form that appears and click Add Event Adaptor button at the end of the form. For example,
Following values are used in the configuration above:
No Format Event Adaptor Name : MBJmsInputAdaptor Event Adaptor Type : jms JNDI Initial Context Factory Class : org.wso2.andes.jndi.PropertiesFileInitialContextFactory (file-based JNDI properties) URL of the JNDI provider : repository/conf/jndi.properties Connection Factory JNDI Name : TopicConnectionFactory Destination Type : topic Enable Durable Subscription : false
Info This is the
jndi.properties
file in<PRODUCT_HOME>/reposiyory/conf
directory. This example uses Topic Connection Factory. Therefore, the following entry points the default Qpid Host to localhost and port to 5672:
connectionfactory.TopicConnectionFactory = amqp://admin:admin@clientid/carbon?brokerlist='tcp://localhost:5673' (MB starts with offset 1)
- After a adapter is successfully added, you can change its configuration and redeploy it. To do this, click the Edit link associated with it. You can also click the other links associated with it to delete it or enable statistics and tracing.
- An XML based editor opens allowing you to edit the event adaptor configuration from UI itself, without having to edit the file in the file system. Do your modifications and click Update.
- Alternatively,
you can specify an event adaptor configuration using an XML file and save it inAnchor step7last step7last <PRODUCT_HOME>/repository/deployment/server/inputeventadaptors
directory, which is the Input event adaptor deployment directory. Since hot deployment is enabled, you can simply add/remove files to deploy/undeploy from the server.Create the XML file with the following WSO2Event event adaptor configurations. Input event adaptor implementation must start with
<inputEventAdaptor>
root element.Code Block language html/xml <inputEventAdaptor name="MBJmsInputAdaptor" statistics="disable" trace="disable" type="jms" xmlns="http://wso2.org/carbon/eventadaptormanager"> <property name="java.naming.provider.url">repository/conf/jndi.properties</property> <property name="transport.jms.SubscriptionDurable">false</property> <property name="java.naming.factory.initial">org.wso2.andes.jndi.PropertiesFileInitialContextFactory</property> <property name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</property> <property name="transport.jms.DestinationType">topic</property> </inputEventAdaptor>
You can configure JMS event adaptors with Map, XML, JSON & Text Input Mapping.
Note Note: When using WSO2 MB as the Input Event Adaptor, at the time you define the Topic, which is a message-related property, follow the syntax Burl :{topic}. That is, add "Burl :" as the prefix of the actual topic. (When using with MB 2.0.1)
Configuring Input JMS Event Adaptor Message Properties
...