Page Comparison

...

The task scheduling component is configured in the tasks-config.xml file (stored in the <PRODUCT_HOME>/repository/conf/etc/ directory). The default configuration is as follows: 

<tasks-configuration xmlns:svns="http://org.wso2.securevault/configuration">
    <taskServerMode>AUTO</taskServerMode>
    <taskServerCount>2</taskServerCount>
 
	<!-- The default location resolver configuration -->
    <defaultLocationResolver>
        <locationResolverClass>org.wso2.carbon.ntask.core.impl.RoundRobinTaskLocationResolver</locationResolverClass>
    </defaultLocationResolver>
    <taskClientDispatchAddress>https://localhost:9448</taskClientDispatchAddress>
    <remoteServerAddress>https://localhost:9443</remoteServerAddress>
    <remoteServerUsername>admin</remoteServerUsername>
    <remoteServerPassword>admin</remoteServerPassword>
    <!--remoteServerPassword svns:secretAlias="remote.task.server.password"></remoteServerPassword-->
</tasks-configuration>

Given below are the task handling settings that you can configure for your server using  The default values in the tasks-config.xml file ensures that minimal changes are required when running in both standalone and clustered modes. Given below are the settings that you can configure in this file.

Anchor
Step 1 Step 1

Setting the task server mode

You can set the task server mode by using one of the following values  for the <taskServerMode> element in the tasks-config.xml file.

...

:

...

• AUTO is : This is the default task handling mode. This setting detects if clustering is enabled in the server and automatically switches to CLUSTERED task handling mode.
• STANDALONE mode : This mode is used when the Carbon server is used as a single installation. That is, tasks will be managed locally within the server.

• CLUSTERED

   mode

  : This mode is used when a cluster of Carbon servers are put together

  . With

  . This requires Axis2 clustering to work. With this setting, if one of the servers in the cluster fail, the tasks will be rescheduled in one of the remaining server nodes.

  This requires Axis2 clustering to work.
• REMOTE mode is used when all tasks should be triggered using an independent task handling server such of WSO2 Task Server. That is, all carbon servers using such an external task handling server should be running on REMOTE mode, while the task handling server can be running on AUTO, STANDALONE or CLUSTERED mode. See how WSO2 Task Server can be used to interface tasks from other servers.
<taskServerCount>: When the <taskServerMode> is CLUSTERED, this

 


Note
Find out more about clustering WSO2 products.

Configuring a clustered task server

If you have enabled the CLUSTERED task server mode in step 1, the following configuration elements in the tasks-config.xml file will be effective:

• <taskServerCount>: This value specifies the number of nodes in the

  task

  server cluster

  . The tasks will not be scheduled until the given

  , which basically represents the number of servers that will share the task scheduling. Task scheduling will only begin after the given number of servers are activated. For example, consider a situation where ten tasks are saved and scheduled in your product and there are five servers in the cluster. When individual servers become active, we do not want the first active server to schedule all the tasks. Instead, we will want all five servers to become active and share the ten tasks between them.

  Note
  The task server count is set to "2" by default, which indicates that at least two nodes will be there in a clustered setup.

• <defaultLocationResolver>: This setting applies when you have a clustered environment. The default location resolver basically controls how the scheduled tasks can be are allocated among multiple nodes of a cluster. The possible options are as follows:
  • RoundRobinTaskLocationResolver: Cluster nodes are selected on a round robin basis and the tasks are allocated.
  • RandomTaskLocationResolver: Cluster nodes are randomly selected and the tasks are allocated.

  • RuleBasedLocationResolver: This allows you to set a criteria for selecting the cluster nodes to which the tasks should be allocated. The [task-type-pattern],[task-name-pattern] and [address-pattern of the server node] can be used as criteria. For example, with this setting, a scheduled task that matches a particular [task-type-pattern] and [task-name-pattern] will be allocated to the server node with a particular [address-pattern]. If multiple server nodes in the cluster match the [address-pattern], the nodes are selected on a round robin basis. The This criteria is specified in the configuration using the the <property> element element. Therefore, you can define multiple properties containing different criteria values. 
    
    For example, see the details of the the RuleBasedLocationResolver configuration  configuration given below.

    Code Block
    <defaultLocationResolver> <locationResolverClass>org.wso2.carbon.ntask.core.impl.RuleBasedLocationResolver</locationResolverClass> <properties> <property name="rule-1">HIVE_TASK,HTTP_SCRIPT*,192.168.1.*</property> <property name="rule-2">HIVE_TASK,.*,192.168.2.*</property> <property name="rule-5">.*,.*,.*</property> </properties> </defaultLocationResolver>

    As shown in this exampleabove, the property names (rule-1, rule-2 and rule-5) define a sequence for the list of properties in the configuration. Therefore, scheduled tasks will evaluate the criteria specified in each property according to the sequence order; i.e., rule-1 is checked before rule-2. In other words, the scheduled task will first check if it matches the criteria in rule-1, and if it does not, it will check rule-2.

    Note
    The RuleBasedLocationResolver allows you to address scenarios where tasks are required to be executed in specific server nodes first. Then, it can fail-over to another set of server nodes if the first (preferred) one is not available.

• <taskClientDispatchAddress>: The address to which the remote task server should dispatch the trigger messages. Usually this would be an endpoint to a load balancer.
• The <remoteServerAddress>, <remoteServerUsername> and <remoteServerPassword> is used to specify the sever address, user name and password of the remote task handling server. That is, these settings are only applicable when the <taskServerMode> is REMOTE. For example, see how you can use WSO2 Task Server as a remote task server.

...

• • .

...