Page Comparison

...

1. Open the ESB management console.
2. Click the Main tab on the Management Console and then go to Manage -> Service Bus and click Inbound Endpoints to open the Inbound Endpoints page.
3. On the Inbound Endpoints page, click Add Inbound Endpoint to open the New Inbound Endpoint page.
4. Specify a name for the inbound endpoint, select the inbound protocol type for the new inbound endpoint , and click Next. This displays all the fields parameters applicable to the new inbound endpoint depending on the protocol type you selected.
5. Specify values for all the mandatory fields.the required parameters. Following are the available inbound protocol types. Click on a required protocol type for information on the parameters you need to specify as well as to view a sample configuration for an inbound endpoint of the relevant protocol type.
   • HTTP Inbound Protocol
   • HTTPS Inbound Protocol
   • File Inbound Protocol
   • JMS Inbound Protocol
   • HL7 Inbound Protocol
   • Kafka Inbound Protocol
   • MQTT Inbound Protocol
   • RabbitMQ Inbound Protocol
   • Custom Inbound Protocol

6. Click Show Advanced Options if you want to configure advanced settings for the inbound endpoint. Available The parameters displayed under advanced options also depend on the protocol type you selected for the inbound endpoint. 

7. Click Save. You will see the new inbound endpoint you added displayed under Available Defined Inbound Endpoints on the Inbound Endpoints page.

Following are the protocol types available for inbound endpoints. Click on a required protocol type for information on how to configure the inbound endpoint based on that protocol.