Page Comparison

...

Table of Contents

maxLevel	3

Predict Mediator configuration

The syntax of the predict mediator configuration is as follows.

...

Property	Description
<model storage-location>	ML model storage location is either the file system or Registry. If the model is stored in the Registry, storage-location should have the prefix `registry:`
`<name>`	Name of the feature according to the generated model.
`<expression>`	The XPath or JSONPath expression to extract the feature value from the payload.
<predictionOutput property>	The message context property name, to which you need to set the prediction output value.

Installing ML features in WSO2 ESB

Follow the steps below to install the ML feature in WSO2 ESB.

Download WSO2 ESB version 4.9.x or later.
Start the WSO2 ESB server as follows.
1. - on Linux, run <ESB_HOME>/bin/wso2server.sh
  - on MS Windows, run <ESB_HOME>/bin/wso2server.bat
Log in to the WSO2 ESB management console using admin/admin credentials, and click Configure.
Click Features, and then click Repository Management.
Click Add Repository, and enter the details as shown below to add the <P2 repository>.
Click Add.
Click Available Features tab, and select the repository added in the previous step.
Deselect the Group features by category check box.

Click Find Features. It can take a while to list out all the available features in the feature repository. Once listed, select the following features.

Machine Learner Core
Machine Learner Commons
Machine Learner Database Service
Metrics Group
Predict Mediator Aggregate

Tip

If you can't see this feature, retry with one of the following suggestions:

Try adding a more recent P2 repository. The repository you added could be deprecated.
Check for the feature in the Installed Features tab.

install ML features in ESB

Once the features are selected, click Install to proceed with the installation.
Click Next, select I accept the terms of the license agreement option, and then click Next.
Click Restart Now, and then click Yes in the message which pops up. Wait a few seconds until the sever restarts, and refresh the screen.

Adding a proxy service to WSO2 ESB

Follow the steps below to create a sample Pass Through Proxy Service to test the Predict mediator.

Log in to the WSO2 ESB management console using admin/admin credentials.
Click Main, and then click Proxy Service.
Click Pass Throgh Proxy.
Enter the details as shown below.
- Enter a name for Proxy Service Name (E.g. PredictMediatirTestProxy).
- Enter http://localhost:9000/services/SimpleStockQuoteService for Target URL.

Click Create . You view the proxy service created as shown below.
proxy services list

Tip

Follow the steps below to view the source view of the proxy service configuration you added.

Log in to the WSO2 ESB management console using admin/admin credentials.
Click Main, and then click List in the Services menu.

Click the corresponding Source View link of the WSDL based proxy service you added above. You view its configuration in the source view as follows.

Code Block

language	xml

<?xml version="1.0" encoding="UTF-8"?>
<proxy xmlns="http://ws.apache.org/ns/synapse"
       name="PredictMediatirTestProxy"
       transports="https,http"
       statistics="disable"
       trace="disable"
       startOnLoad="true">
   <target>
      <inSequence>
         <log level="custom">
            <property name="before-predict-mediator"
                      expression="fn:concat('ML Mediator Prediction : ',get-property('result'))"/>
         </log>
         <predict>
            <model storage-location="/Users/praneesha/Documents/Product_Packs/ML/wso2ml-1.0.0-SNAPSHOT/samples/ml-model-usage/src/main/resources/downloaded-ml-model"/>
            <features>
               <feature name="SI2" expression="$body/features/SI2"/>
               <feature name="PG2" expression="$body/features/PG2"/>
               <feature name="Age" expression="$body/features/Age"/>
               <feature name="DBP" expression="$body/features/DBP"/>
               <feature name="BMI" expression="$body/features/BMI"/>
               <feature name="DPF" expression="$body/features/DPF"/>
               <feature name="TSFT" expression="$body/features/TSFT"/>
               <feature name="NumPregnancies" expression="$body/features/NumPregnancies"/>
            </features>
            <predictionOutput property="result"/>
         </predict>
         <log level="custom">
            <property name="after-predict-mediator"
                      expression="fn:concat('ML Mediator Prediction : ',get-property('result'))"/>
         </log>
         <drop/>
      </inSequence>
      <outSequence>
         <send/>
      </outSequence>
      <endpoint>
         <address uri="http://localhost:9000/services/SimpleStockQuoteService"/>
      </endpoint>
   </target>
   <description/>
</proxy>

Adding Log, Predict and Drop Mediators to the Sequence

Follow the steps below to add log, predict and drop mediators to the sequence.

Log in to the WSO2 ESB management console using admin/admin credentials.
Click Main, and then click List in the Services menu.
Click the corresponding Design View link of the WSDL based proxy service you added above.
Click Next in the Step 1 of 3 - Basic Settings screen to proceed to step 2.
In the Step 2 of 3 - In Sequence and Endpoint Options screen, Select Define Inline, and then click the Create link as shown below.
In the Design in Sequence screen, click the Add Child option which is next to the Root element.
Select Core, and then select Log from the drop down menu as shown below.
Enter the following details in the Log Mediator section as shown below.
- Select INFO for Log Category.
- Select Custom for Log Level.
- Click Add Property.
- Enter before-predict-mediator for Property Name.
- Select Expression from the Property Value drop down list.
- Enter the following expression for Value/Expression: fn:concat('ML Mediator Prediction : ',get-property('result'))
Click Update.
Click on the Log element, and then click the Add Sibling option which is next to it.
Select Agent and then select Predict from the drop down menu as shown below.
Enter the path to generated model, which you want to use in predictions for Model Storage Location as shown below.
Tip
You can give the folder path of the <ML_HOME>/samples/model-usage/src/main/resources/downloaded-ml-model sample model.
Click Load Model. It loads thefeatures list of the model as shown below.

Enter the following XPath (or JSONPath) expressions in the Expression field for the displayed features list associated with the model, to extract the feature values from the mediating message.

Feature name	XPath expression
Age	`$body/features/Age`
BMI	`$body/features/BMI`
DBP	`$body/features/DBP`
DPF	`$body/features/DPF`
NumPregnancies	`$body/features/NumPregnancies`
PG2	`$body/features/PG2`
SI2	`$body/features/SI2`
TSFT	`$body/features/TSFT`

Tip

If you are defining a namespace in the XPATH expression, click the corresponding Namespaces link of the features to add namespaces. Then, in the Namespace Editor, add any number of namespace prefixes and URL that you have used in the expression as shown below.

In the Prediction Output section, the message context property name (e.g. result), to which the prediction output value needs to be set as shown below.
Click Update.
Click on the Predict element, and then click the Add Sibling option which is next to it.
Select Core and then select Log from the drop down menu as shown below.
Enter the following details in the Log Mediator section as shown below.

Select INFO for Log Category.
Select Custom for Log Level.
Click Add Property.
Enter after-predict-mediator for Property Name.
Select Expression from the Property Value drop down list.
Enter the following expression for Value/Expression: fn:concat('ML Mediator Prediction : ',get-property('result'))
Click Update.
Click on the Log element, and then click the Add Sibling option which is next to it.
Select Core and then select Drop from the drop down menu as shown below.
Click Save & Close.
Click Next in the Step 2 of 3 - In Sequence and Endpoint Options screen.
Click Finish in the Step 3 of 3 0 Out Sequence and Fault Sequence Options screen.