Page Comparison

Following are the key capabilities with respect to the key features of WSO2 EI.

Message routing

When there is an incoming message into WSO2 Enterprise Integrator, it is able to determine and route the message to the recipient. Routing can also be done based on some component of the message. This is known as content-based routing and is done using the Switch mediator.

For information in implementing content based routing, see Routing Requests Based on Message Content .

Message filtering

The WSO2 Enterprise Integrator is able to filter out messages based on the message content using the Filter mediator. This feature allows you to perform complex logic, where you are able to filter out messages and send them in different mediation flows.

Message transformation 

When sender and receiver messages do not have the same data format, the WSO2 Enterprise Integrator can be used to translate the messages between the sender and recipient. For information on how the Enterprise Integrator can be used for this, see the Message Translator pattern in the EIP Guide. The PayloadFactory mediator and Data Mapper mediator can be used to implement this. You can manipulate messages by adding and removing content from them, converting them to a completely different message format and even validating messages based on the available validation mechanisms of the message format.

For an example of how you can implement message transformation using the Data Mapper mediator, see Transforming Message Content.

Content enriching

You can use the Enrich Mediator to process a message based on a given source configuration and then perform a specified action on the message by using the target configuration. It gets an OMElement using the configuration specified in the source and then modifies the message by putting it on the current message using the configuration in the target.

Protocol switching

The WSO2 Enterprise Integrator has the capability to take messages that come in one protocol and then send the message out in a completely different protocol (e.g. HTTP to JMS). The protocol bridging technology in Enterprise Integrator takes the business content of a message that comes in from one protocol and sends this content out in a completely different format and protocol.

Service chaining

Service chaining (orchestration) is a popular use case in the Enterprise Integrator, where several services are exposed as a single service, aggregated service. Enterprise Integrator is used for the integration and sequential calling of these services so that the expected response can be provided to the client.

For information on implementing a simple service chaining scenario, see Exposing Several Services as a Single Service.

Message storing and forwarding

Store and forward messaging pattern is used in asynchronous messaging. This can be used when integrating with systems that accept message traffic at a given rate and handling failover scenarios. In this pattern, messages are sent to a Message Store where they are temporarily stored before they are delivered to their destination by a Message Processor. The Enterprise Integrator is shipped with a few message store implementations and also allows you to implement a custom message store implementation.

For information on implementing a store and forward pattern using the in-memory store of Enterprise Integrator, see the Storing and Forwarding Messages.

For information on an example on implementing guaranteed delivery in Enterprise Integrator, see Guaranteed Delivery with Failover Message Store and Scheduled Failover Message Forwarding Processor.

Load balancing

The load balancer automatically distributes incoming traffic across multiple WSO2 product instances. It enables you to achieve greater levels of fault tolerance in your cluster and provides the required balancing of load needed to distribute traffic. For more information, see  Clustering the ESB Profile.

Following are the key concepts with respect to the key constructs/artifacts of WSO2 EI.

Message entry points

Proxy services

Proxy services are virtual services that receive messages and optionally process them before forwarding them to a service at a given endpoint. This approach allows you to perform necessary transformations and introduce additional functionality without changing your existing service. Any available transport can be used to receive and send messages from the proxy services. A proxy service is externally visible and can be accessed using a URL similar to a normal web service address.

For more information, see Working with Proxy Services.

REST APIs

A REST API in Enterprise Integrator is analogous to a web application deployed in the Enterprise Integrator runtime. Each API is anchored at a user-defined URL context, much like how a web application deployed in a servlet container is anchored at a fixed URL context. An API will only process requests that fall under its URL context. A REST API defines one or more resources, which is a logical component of an API that can be accessed by making a particular type of HTTP call. 

A REST API resource is used by the WSO2 Enterprise Integrator mediation engine to mediate incoming requests, forward them to a specified endpoint, mediate the responses from the endpoint, and send the responses back to the client that originally requested them. We can create an API resource to process defined HTTP request method/s that are sent to the back-end service. The In sequence handles incoming requests and sends them to the back-end service, and the Out sequence handles the responses from the back-end service and sends them back to the requesting client. 

REST APIs allow you to send messages directly into the Enterprise Integrator using REST.

For more information, see Working with APIs.

Inbound endpoints

An inbound  endpoint is a message source that can be configured dynamically. In the Enterprise Integrator, when it comes to the existing Axis2 based transports, only the HTTP transport works in a multi-tenant mode. Inbound endpoints support all transports to work in a multi-tenant mode.

For more information, see Working with Inbound Endpoints.

Tasks

A task allows you to run a piece of code triggered by a timer. WSO2 Enterprise Integrator provides a default task implementation, which you can use to inject a message to the Enterprise Integrator at a scheduled interval. You can also write your own custom tasks by implementing a Java interface.

For more information, see Working with Scheduled Tasks.

Message processing units

Mediators

Mediators are individual processing units that perform a specific function, such as sending, transforming, or filtering messages. WSO2 Enterprise Integrator includes a comprehensive mediator library that provides functionality for implementing widely used Enterprise Integration Patterns (EIPs). You can also easily write a custom mediator to provide additional functionality using various technologies such as Java, scripting, and Spring.

For more information, see Mediators.

Sequences

A sequence is a set of mediators organized into a logical flow, allowing you to implement pipes and filter patterns. You can add sequences to proxy services and REST APIs.

For more information, see Mediation Sequences.

Message exit points 

A message exit point or an endpoint defines an external destination for a message. An endpoint can connect to any external service after configuring it with any attributes or semantics needed for communicating with that service. For example, an endpoint could represent a URL,a mailbox, a JMS queue, or a TCP socket, along with the settings needed to connect to it.

You can specify an endpoint as an address endpoint, WSDL endpoint, a   load balancing endpoint  and more. An endpoint is defined independently of transports, allowing you to use the same endpoint with multiple transports. When you configure a message mediation sequence or a proxy service to handle the incoming message, you specify which transport to use and the endpoint where the message will be sent.

For more information, see Working with Endpoints.

Message stores and processors

Templates

Templates help you to manage your configurations without scattering or duplicating them by creating prototypes that you can use and reuse when required. Templates improve re-usability and readability of your ESB configurations (XML files). There are two types of templates available in the ESB profile as Sequence templates and Endpoint templates. For more information on templates, see Working with Templates.

Connectors

A connector is a collection of templates that define operations that can be called from the Enterprise Integrator and is used when connecting the Enterprise Integrator to external third party APIs. WSO2 Enterprise Integrator provides a variety of connectors via the WSO2 Connector Store.  

For information on using a connector in your EI configuration, see Using the Gmail Connector.

Transports

A transport is responsible for carrying messages that are in a specific format. The Enterprise Integrator supports all the widely used transports including HTTP/s, JMS, VFS and domain-specific transports like FIX. You can easily add a new transport using the Axis2 transport framework and plug it into the Enterprise Integrator. Each transport provides a receiver, which the Enterprise Integrator uses to receive messages, and a sender, which it uses to send messages. The transport receivers and senders are independent of the Enterprise Integrator core.

For more information, see Working with Transports.

Message builders and formatters

When a message comes into the Enterprise Integrator, the receiving transport selects a message builder based on the message's content type. It uses that builder to process the message's raw payload data and convert it into common XML, which the Enterprise Integrator mediation engine can then read and understand. WSO2 Enterprise Integrator includes message builders for text-based and binary content.

Conversely, before a transport sends a message out from the Enterprise Integrator, a message formatter is used to build the outgoing stream from the message back into its original format. As with message builders, the message formatter is selected based on the message's content type.

You can implement new message builders and formatters using the Axis2 framework. For more information, see Working with Message Builders and Formatters.

Applying security to artifacts 

You can apply security to artifacts of the ESB profile using WSO2 EI Tooling. The Quality of Service (QoS) component implements security. For more information, see Applying Security to a Proxy Service.

Logging messages

You can use the Log mediator to log mediated messages. For more information on the usage of the log mediator, see Log Mediator.

Message tracing

Message tracing helps you to track issues after an integration process finishes and thereby, allows you to identify and fix issues by identifying the root cause. It is used to trace, track and visualize a body of a message in each intermediate stage of its transmission. This is useful for a number of reasons, including auditing and debugging. For instructions on how to do message tracing, see Monitoring WSO2 EI with EI Analytics.

Debugging mediation

Message mediation mode is one of the operational modes of WSO2 EI where EI functions as an intermediate message router. A unit of the mediation flow is a mediator. A sequence is a series of mediators, where each mediator is a unit entity that can input a message, carry out a predefined processing task on the message, and output the message for further processing. Debugging is where you want to know if these units, which function  as separate entities are operating as intended, or if a combination of these units are operating as a whole as intended. For more information, see Debugging Mediation.

Enterprise Integration Patterns 

Enterprise Application Integration (EAI) enables you to connect business applications with heterogeneous systems. The  EIP patterns guide demonstrates how the patterns that are invented integration solution architects over the years can be simulated using various constructs in the ESB profile. 

ESB tooling

You can use WSO2 use WSO2 Enterprise Integrator Tooling to Tooling to create various integration artifacts that you can build and deploy to the ESB profile of WSO2 EI in order to process requests. The tooling functionality is available via the Developer Studio dashboard in Eclipse.

Data service

The data in your organization can be a complex pool of information that is stored in heterogeneous systems, ranging from RDBMSs to Excel files, and Google spreadsheets, etc. Data services are created for the purpose of decoupling the data from its infrastructure. In other words, when you create a data service in WSO2 EI, the data that is stored in a storage system (such as an RDBMS) can be exposed in the form of a service. This allows users (that may be any application or system) to access the data without interacting with the original source of the data. Data services are, thereby, a convenient interface for interacting with the database layer in your organization. 

A data service in WSO2 EI is a SOAP-based web service, by default. However, you also have the option of creating REST resources. Therefore, the applications and systems consuming the data service can have both SOAP-based, and RESTful access to your data.

Datasources

Your organization's data can be stored in various data storage systems, which are thedatasources. Data services in WSO2 EI support the followingdatasources: Relational databases, CSV files, Microsoft Excel Sheets, Google Spreadsheets, RDF, MongoDB, Cassandra, and Web Resources. Additionally, you can also useJNDIdatasources, and create customdatasources. Read about using variousdatasourceswith data services defined in WSO2 EI.

RESTful data services

A data service exposes your data (stored in various data stores) as a service. You can enable RESTful access to your data, by defining RESTful resources, for the relevant data, in your data service. REST resources in WSO2 EI support both JSON and XML media types out of the box. Therefore, a resource can receive requests, and send responses in either medium. Secure resources with HTTP(S) Basic Auth integrated to enterprise identity systems (via WSO2 Identity Server).

OData services

RESTful data services in WSO2 EI supports OData (OData protocol version 4 - OASIS standards), which makes RESTful data access easier. In a normal data service, you will write SQL queries for CRUD operations that will be performed on the data. In other words, to be able to GET, UPDATE, POST, or DELETE data in a database, the data service should have separate SQL queries written for each purpose. However, when you enable OData for your RESTful data service, these CRUD operations will be enabled automatically, which allows RESTful data access using CRUD operations out of the box.

Currently, OData support is only available for RDBMS datasources and Cassandra datasources. Odata services will now be accessible from the following endpoints: 

• For super tenant: http://localhost:9763/odata/{dataserviceName}/{datasourceId}/
• For normal tenants: http://localhost:9763/odata/t/{tenantId}/{dataserviceName}/{datasourceId}/

DatafederationData federation

A data service defined in WSO2 EI has the ability to aggregate the data that is stored in various, disparate datasources, and present the aggregated data as a single output. For example, the data of employees in a company may be stored in various data stores (details of employment history, details of the physical office, contact information, etc.). Data federation allows users to consume all this data through a single request to the data service. The data service will aggregate the relevant data from each of the disparate datasourcesand datasources and present it as one response to the request. Data federation can be achieved in two ways:

• Expose multiple datasources using a single data service.
• Use Nested Queries in your data service. This will allow you to feed the result you get from one query as input to another query. That is, data can be combined into a single response or resource.

Distributed transactions

A distributed transaction is a set of operations that should be performed on two or more, distributed RDBMS data stores. If the operation on one data store (node) fails, the entire set of operations will fail in all the data stores. In other words, a distributed transaction is an example of a batch process, where multiple requests are grouped into one server call and processed as one unit by the data service.

Data services in WSO2 EI support distributed transactions, which allows data consumers to perform such transactions easily by using one data service as the interface. Note that distributed transactions can only be performed for IN-ONLY operations that will insert, update, or delete data in the data stores. These are not applicable to operations for retrieving data.

A transaction manager is set up in the middle of these transactions for effective coordination and management. This feature uses Java Transaction API (JTA), which allows distributed transactions to be carried out across multiple XA resources in a Java environment. You can also override this transaction manager.

Batch processing

A data service is an interface that receives requests from data consumers and performs the requested tasks in the relevant data stores. Batch processing allows a data service to group multiple requests into a batch and process it as a single request. Batch processing can only be used for IN-ONLY operations that will insert, update, or delete data in the data stores, and not for operations that retrieve data.

Data services in WSO2 EI support two scenarios of batch requesting: Client-side batch requests, and server-side batch requests.

For example, consider the task of entering details of new employees into a database table. Typically, the client consuming the data can do this by sending separate requests with each employee record. Alternatively, the client can group the individual requests into a single batch, and send one batch request to the data service. In this example, the data service will have one operation defined for inserting data into the database. However, when batch processing is enabled, it is possible to insert multiple records into that database, using this operation. Therefore, the client can invoke this operation using a single request, to insert multiple records. This is client-side batch requesting.

Consider another example, where the client needs to enter the employee’s bank details along with the personal details, but the bank details should be insertedtoa different data store. In this example, the data service will have two separate operations for inserting data into two separate data stores, and the client is invoking both operations, using a single request (also called a request box). This is server-side batch requesting.

Note that batch requests are transactional if the data store is anRDBMS, or another system that supports transactions. Transactional requests succeed or fail as a batch. That is, if one individual request fails, all the requests in the batch will fail to make sure that the data is synchronized. Server-side batch requests work for local transactions (performed on one node of the data store), as well as distributed transactions (performed on multiple nodes of the data store).

Data transformation

XSLT transformation is used in data services to transform the result of an already defined operation into a different result. The user can define the transformation xslt and provide the url of the transformation file in the result element.

Managed data access

Most businesses require secure and managed data access across these federated data stores.

Streaming

Data service streaming helps manage large data chunks sent back to the client by the data service as the response to a request. When streaming is enabled, the data is sent to the client as it is generated, without memory building up in the server. By default, streaming is enabled in data services.

Namespaces

The service namespace uniquely identifies a Web service and is specified by the <targetNamespace> element in the WSDL that represents the service. A data service is simply a Web service with specialized functionality. When developing a data service, you get to apply namespaces at various levels. As a data service implementation is based on XML, namespace handling is useful for making sure that there are no conflicting element names in the XML. Although namespaces are optional for data services, in some scenarios they are necessary. For more information, see Defining Namespaces.