The Default Endpoint is an endpoint defined for adding QoS and other configurations to the endpoint which is resolved from the To address of the message context. All the configurations such as message format for the endpoint, the method to optimize attachments, reliable messaging, and security policies for the endpoint can be specified as in the Address Endpoint. This endpoint differs from the address endpoint only in the URI attribute which will not be present in this endpoint.
...
| Info | ||
|---|---|---|
| ||
You can configure the Default endpoint using XML. Click on "Switch to source view " in in the "Default Endpoint" page.
|
| Code Block | ||
|---|---|---|
| ||
<default [format="soap11|soap12|pox|get"] [optimize="mtom|swa"]
[encoding="charset encoding"]
[statistics="enable|disable"] [trace="enable|disable"]>
<enableRM [policy="key"]/>?
<enableSec [policy="key"]/>?
<enableAddressing [version="final|submission"] [separateListener="true|false"]/>?
<timeout>
<duration>timeout duration in milliseconds</duration>
<action>discard|fault</action>
</timeout>?
<markForSuspension>
[<errorCodes>xxx,yyy</errorCodes>]
<retriesBeforeSuspension>m</retriesBeforeSuspension>
<retryDelay>d</retryDelay>
</markForSuspension>
<suspendOnFailure>
[<errorCodes>xxx,yyy</errorCodes>]
<initialDuration>n</initialDuration>
<progressionFactor>r</progressionFactor>
<maximumDuration>l</maximumDuration>
</suspendOnFailure>
</default>
|
...
UI Configuration
1. In the "Add Endpoint" tab, click "Default Endpoint" (See Adding an Endpoint). The "Default Endpoint" page appears.
- Name - The only Default Endpoint specific option. It defines the unique name of an endpoint.
2. In case you want to configure advanced options, click on the "Show Advanced Options" drop-down pane.
3. Then the page with all the available Default Endpoint options appears.
Specific advanced options of a Default Endpoint are the following:To configure a default endpoint in the Management Console, go to the Main tab and click Endpoints to open the Manage Endpoints page. Click on the Add Endpoint tab and then click Default Endpoint.
Parameters available to configure the default endpoint are as follows.
| Parameter Name | Description |
|---|---|
| Name | This parameter is used to define a unique name for the endpoint. |
| Show Advanced Options | Click this link if you want to add advanced options for the endpoint. Advanced options specific to the default endpoint are as follows.
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
|
...
| |
| Add Property | Click this link if you want to add properties to the endpoint. See Properties Reference for further information on the available properties. |
| Excerpt | ||
|---|---|---|
| ||
Description of the Default Endpoint in WSO2 ESB. |