Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added a note under the KM section on the path changing from APIM_HOME to IS_HOME

...

Improvement AreaPerformance Recommendations
API Gateway nodes

Increase memory allocated by modifying the /bin/wso2server. sh file with the following setting:

  • -Xms2048m -Xmx2048m -XX:MaxPermSize=1024m

Set the following in the <APIM_HOME>/repository/conf/axis2/axis2_client.xml file:

Note
  • The following Axis2 client configurations are only applicable when Web Services key validation (WS key validation) is enabled.
  • The default values mentioned in the APIM 1.10.0 pack are the values that we identified at the time of releasing APIM 1.10.0. However, if you want high concurrency, please use the values mentioned below:
Code Block
<parameter name="defaultMaxConnPerHost">1000</parameter> 
<parameter name="maxTotalConnections">30000</parameter> 
NHTTP transport of API Gateway

Recommended values for the <AM_HOME>/repository/conf/nhttp.properties file are given below. Note that the commented out values in this file are the default values that will be applied if you do not change anything.

Property descriptions:

snd_t_coreTransport sender worker pool's initial thread count
snd_t_maxTransport sender worker pool's maximum thread count
snd_io_threadsSender-side IO workers, which is recommended to be equal to the number of CPU cores. I/O reactors usually employ a small number of dispatch threads (often as few as one) to dispatch I/O event notifications to a greater number (often as many as several thousands) of I/O sessions or connections. Generally, one dispatch thread is maintained per CPU core.
snd_alive_secSender-side keep-alive seconds
snd_qlenSender queue length, which is infinite by default

Recommended values:

# HTTP Sender thread pool parameters

  • snd_t_core=200
  • snd_t_max=250
  • snd_alive_sec=5
  • snd_qlen=-1
  • snd_io_threads=16

# HTTP Listener thread pool parameters

  • lst_t_core=200
  • lst_t_max=250
  • lst_alive_sec=5
  • lst_qlen=-1
  • lst_io_threads=16

#timeout parameters

  • http.socket.timeout.receiver: Recommended socket timeout for listener is 120000

  • http.socket.timeout.sender: Recommended socket timeout for sender is 120000

PassThrough transport of API Gateway

Recommended values for the <AM_HOME>/repository/conf/passthru-http.properties file are given below. Note that the commented out values in this file are the default values that will be applied if you do not change anything.

Property descriptions

worker_thread_keepalive_sec

Defines the keep-alive time for extra threads in the worker pool
worker_pool_queue_lengthDefines the length of the queue that is used to hold runnable tasks to be executed by the worker pool
io_threads_per_reactorDefines the number of IO dispatcher threads used per reactor

http.max.connection.per.host.port

Defines the maximum number of connections per host port
worker_pool_queue_lengthDetermines the length of the queue used by the PassThrough transport thread pool to store pending jobs.

Recommended values

  • worker_thread_keepalive_sec: Default value is 60s. This should be less than the socket timeout.

  • worker_pool_queue_length: Set to -1 to use an unbounded queue. If a bound queue is used and the queue gets filled to its capacity, any further attempts to submit jobs will fail, causing some messages to be dropped by Synapse. The thread pool starts queuing jobs when all the existing threads are busy and the pool has reached the maximum number of threads. So, the recommended queue length is -1.

  • io_threads_per_reactor: Value is based on the number of processor cores in the system. (Runtime.getRuntime().availableProcessors())

  • http.max.connection.per.host.port : Default value is 32767, which works for most systems but you can tune it based on your operating system (for example, Linux supports 65K connections).

  • worker_pool_size_core: 400
  • worker_pool_size_max: 500
  • io_buffer_size: 16384
  • http.socket.timeout: 60000
  • snd_t_core: 200  
  • snd_t_max: 250  
  • snd_io_threads: 16  
  • lst_t_core: 200  
  • lst_t_max: 250  
  • lst_io_threads: 16
Make the number of threads equal to the number of processor cores.
Time-out configurations

The API Gateway routes the requests from your client to an appropriate endpoint. The most common reason for your client getting a timeout is when the Gateway's timeout is larger than client's timeout values. You can resolve this by either increasing the timeout on the client's side or by decreasing it on the API Gateway's side.

Here are few parameters, in addition to the timeout parameters discussed in the previous sections.

synapse.global_timeout_interval

Defines the maximum time that a callback is waiting in the Gateway for a response from the backend. If no response is received within this time, the Gateway drops the message and clears out the callback. This is a global level parameter that affects all the endpoints configured in Gateway.

Global timeout is defined in the <APIM_HOMe>/repository/conf/synapse.properties file. Recommended value is 120000.

Endpoint-level timeout

You can define timeouts per endpoint for different backend services, along with the action to be taken in case of a timeout.

The example below sets the endpoint to 30 seconds and executes the fault handler in case of a timeout.

Code Block
languagexml
<timeout>
   <duration>10000</duration>
   <responseAction>fault</responseAction>
</timeout>
Key Manager nodes

Set the MySQL maximum connections:

Code Block
languagehtml/xml
mysql> show variables like "max_connections"; 
 max_connections was 151 
 set to global max_connections = 250; 

Set the open files limit to 200000 by editing the /etc/sysctl.conf file:

Code Block
sudo sysctl -p

Set the following in the <APIM_HOME>/repository/conf/tomcat/catalina-server.xml file.

Note

If you use WSO2 Identity Server (WSO2 IS) as the Key Manager, then the root location of the above path and the subsequent path needs to change from <API-M_HOME> to <IS_HOME>.

Code Block
maxThreads="750" 
minSpareThreads="150" 
disableUploadTimeout="false" 
enableLookups="false" 
connectionUploadTimeout="120000" 
maxKeepAliveRequests="600" 
acceptCount="600" 

Set the following connection pool elements in the <APIM_HOME>/repository/conf/datasources/master-datasources.xml file:

Code Block
<maxActive>50</maxActive>
<maxWait>60000</maxWait>
<testOnBorrow>true</testOnBorrow>
<validationQuery>SELECT 1</validationQuery>
<validationInterval>30000</validationInterval>

Note that you set the <testOnBorrow> element to true and provide a validation query (e.g., in Oracle, SELECT 1 FROM DUAL), which is run to refresh any stale connections in the connection pool. Set a suitable value for the <validationInterval> element, which defaults to 30000 milliseconds. It determines the time period after which the next iteration of the validation query will be run on a particular connection. It avoids excess validations and ensures better performance.

...