Versions Compared

Old Version 18

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  The following diagram indicates the minimum deployment pattern used for high availability.

...

  1. Download and install WSO2 EI  from here.

    Info

    If you are running WSO2 EI Analytics in a Red Hat Linux environment, follow the steps below to apply the Java ports and bindings of the LZ4 compression algorithm and the xxHash hashing algorithm.

    1. Remove the snappy-java_1.1.1.7.jar file from the <EI_HOME>/lib and <EI_HOME>/dropins directories.
    2. Download the LZ4 JAR file and copy it to the <EI_HOME>/lib and <EI_HOME>/dropins directories.
    3. Add the following compression and serialization property to the <EI_HOME>/wso2/analytics/conf/analytics/spark/spark-defaults.conf file:
      spark.io.compression.codec lz4
  2. Follow the steps below to set up MySQL.

    1. Download and install MySQL Server.

    2. Download the MySQL JDBC driver.

    3. Unzip the downloaded MySQL driver zipped archive, and copy the MySQL JDBC driver JAR (mysql-connector-java-x.x.xx-bin.jar) into the <EI_HOME>/wso2/analytics/repository/components/lib directory of all the nodes in the cluster.

    4. Enter the following command in a terminal/command window, where username is the username you want to use to access the databases.
      mysql -u username -p 
    5. When prompted, specify the password that will be used to access the databases with the username you specified.

    6. Create two databases named userdb and regdb.

      Info
      titleAbout using MySQL in different operating systems

      For users of Microsoft Windows, when creating the database in MySQL, it is important to specify the character set as latin1. Failure to do this may result in an error (error code: 1709) when starting your cluster. This error occurs in certain versions of MySQL (5.6.x) and is related to the UTF-8 encoding. MySQL originally used the latin1 character set by default, which stored characters in a 2-byte sequence. However, in recent versions, MySQL defaults to UTF-8 to be friendlier to international users. Hence, you must use latin1 as the character set as indicated below in the database creation commands to avoid this problem. Note that this may result in issues with non-latin characters (like Hebrew, Japanese, etc.). The following is how your database creation command should look.

      mysql> create database <DATABASE_NAME> character set latin1;

      For users of other operating systems, the standard database creation commands will suffice. For these operating systems, the following is how your database creation command should look.

      mysql> create database <DATABASE_NAME>;

    7. Execute the following script for the two databases you created in the previous step.
      mysql> source <EI_HOME>/wso2/analytics/dbscripts/mysql.sql; 

      Expand
      titleClick here to view the commands for performing steps f and g
      Code Block
      mysql> create database userdb;
mysql> use userdb;
mysql> source <EI_HOME>/wso2/analytics/dbscripts/mysql.sql;
mysql> grant all on userdb.* TO username@localhost identified by "password";
 
 
mysql> create database regdb;
mysql> use regdb;
mysql> source <EI_HOME>/wso2/analyticsdbscripts/mysql.sql;
mysql> grant all on regdb.* TO username@localhost identified by "password";

    8. Create the following databases in MySQL.

      • WSO2_ANALYTICS_EVENT_STORE_DB
      • WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB
      Info

      It is recommended to create the databases with the same names given above because they are the default JNDI names that are included in the <EI_HOME>/wso2/analytics/conf/analytics/analytics-conf.xml file as shown in the extract below. If you change the name, the analytics-conf.xml file should be updated with the changed name.

      Code Block
      languagexml
      <analytics-record-store name="EVENT_STORE">
   <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
   <properties>
      <property name="datasource">WSO2_ANALYTICS_EVENT_STORE_DB</property>
      <property name="category">read_write_optimized</property>
   </properties>
</analytics-record-store>
<analytics-record-store name="EVENT_STORE_WO">
   <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
   <properties>
      <property name="datasource">WSO2_ANALYTICS_EVENT_STORE_DB</property>
      <property name="category">write_optimized</property>
   </properties>
</analytics-record-store>
<analytics-record-store name="PROCESSED_DATA_STORE">
   <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
   <properties>
      <property name="datasource">WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</property>
      <property name="category">read_write_optimized</property>
   </properties>
</analytics-record-store>

...

  1. Do the following database-related configurations.

    1. Follow the steps below to configure the <EI_HOME>/wso2/analytics/conf/datasources/master-datasources.xml file as required

      1. Enable the all the nodes to access the users database by configuring a datasource to be used by user manager as shown below. 

        Code Block
        languagexml
        <datasource>
	<name>WSO2UM_DB</name>
	<description>The datasource used by user manager</description>
	<jndiConfig>
  	<name>jdbc/WSO2UM_DB</name>
	</jndiConfig>
	<definition type="RDBMS">
  	<configuration>
    	<url>jdbc:mysql://[MySQL DB url]:[port]/userdb</url>
    	<username>[user]</username>
    	<password>[password]</password>
    	<driverClassName>com.mysql.jdbc.Driver</driverClassName>
    	<maxActive>50</maxActive>
    	<maxWait>60000</maxWait>
    	<testOnBorrow>true</testOnBorrow>
    	<validationQuery>SELECT 1</validationQuery>
    	<validationInterval>30000</validationInterval>
  	</configuration>
	</definition>
</datasource>

      2. Enable the nodes to access the registry database by configuring the WSO2REG_DB data source as follows.

        Code Block
        languagexml
        <datasource>
	<name>WSO2REG_DB</name>
	<description>The datasource used by the registry</description>
	<jndiConfig>
  	<name>jdbc/WSO2REG_DB</name>
	</jndiConfig>
	<definition type="RDBMS">
  	<configuration>
    	<url>jdbc:mysql://[MySQL DB url]:[port]/regdb</url>
    	<username>[user]</username>
    	<password>[password]</password>
    	<driverClassName>com.mysql.jdbc.Driver</driverClassName>
    	<maxActive>50</maxActive>
    	<maxWait>60000</maxWait>
    	<testOnBorrow>true</testOnBorrow>
    	<validationQuery>SELECT 1</validationQuery>
    	<validationInterval>30000</validationInterval>
  	</configuration>
	</definition>
</datasource>

        For detailed information about registry sharing strategies, see the library article Sharing Registry Space across Multiple Product Instances.

    2. Point to WSO2_ANALYTICS_EVENT_STORE_DB and WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB in the <EI_HOME>/wso2/analytics/conf/datasources/analytics-datasources.xml file as shown below.

      Code Block
      languagexml
      <datasources-configuration>
    <providers>
        <provider>org.wso2.carbon.ndatasource.rdbms.RDBMSDataSourceReader</provider>
    </providers>

    <datasources>
        <datasource>
            <name>WSO2_ANALYTICS_EVENT_STORE_DB</name>
            <description>The datasource used for analytics record store</description>
            <definition type="RDBMS">
                <configuration>
                    <url>jdbc:mysql://[MySQL DB url]:[port]/WSO2_ANALYTICS_EVENT_STORE_DB</url>
                    <username>[username]</username>
                    <password>[password]</password>
                    <driverClassName>com.mysql.jdbc.Driver</driverClassName>
                    <maxActive>50</maxActive>
                    <maxWait>60000</maxWait>
                    <testOnBorrow>true</testOnBorrow>
                    <validationQuery>SELECT 1</validationQuery>
                    <validationInterval>30000</validationInterval>
                    <defaultAutoCommit>false</defaultAutoCommit>
                </configuration>
            </definition>
        </datasource>
        <datasource>
            <name>WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</name>
            <description>The datasource used for analytics record store</description>
            <definition type="RDBMS">
                <configuration>
                    <url>jdbc:mysql://[MySQL DB url]:[port]/WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</url>
                    <username>[username]</username>
                    <password>[password]</password>
                    <driverClassName>com.mysql.jdbc.Driver</driverClassName>
                    <maxActive>50</maxActive>
                    <maxWait>60000</maxWait>
                    <testOnBorrow>true</testOnBorrow>
                    <validationQuery>SELECT 1</validationQuery>
                    <validationInterval>30000</validationInterval>
                    <defaultAutoCommit>false</defaultAutoCommit>
                </configuration>
            </definition>
        </datasource>
    </datasources>
</datasources-configuration>

      For more information, see Datasources in DAS documentation.

      Info

      Datasources are configured for WSO2 EI Analytics in the way they are configured for WSO2 Data Analytics Server.

    3. To share the user store among the nodes, open the <EI_HOME>/wso2/analytics/conf/user-mgt.xmlfile and modify the dataSource property of the <configuration> element as follows.

      Code Block
      languagexml
      <configuration> 
...
    <Property name="dataSource">jdbc/WSO2UM_DB</Property>
</configuration>
      Info

      The datasource name specified in this configuration should be the same as the datasource used by user manager that you configured in sub step a, i.

    4. In the <EI_HOME>/wso2/analytics/conf/registry.xml file, add or modify the dataSource attribute of the <dbConfig name="govregistry"> element as follows.

      Code Block
      languagexml
      <dbConfig name="govregistry">
	<dataSource>jdbc/WSO2REG_DB</dataSource>
</dbConfig>
<remoteInstance url="https://localhost:9443/registry"> 
	<id>gov</id>
	<cacheId>user@jdbc:mysql://localhost:3306/regdb</cacheId>
	<dbConfig>govregistry</dbConfig>
	<readOnly>false</readOnly>
	<enableCache>true</enableCache>
	<registryRoot>/</registryRoot>
</remoteInstance>
<mount path="/_system/governance" overwrite="true">
	<instanceId>gov</instanceId>
	<targetPath>/_system/governance</targetPath>
</mount>
<mount path="/_system/config" overwrite="true">
	<instanceId>gov</instanceId>
	<targetPath>/_system/analyticsconfig</targetPath>
</mount>
      Note

      Do not replace the following configuration when adding in the mounting configurations. The registry mounting configurations mentioned in the above steps should be added in addition to the following.

      Code Block
      languagexml
      <dbConfig name="wso2registry">
    <dataSource>jdbc/WSO2CarbonDB</dataSource>
</dbConfig>

  2. Open the <EI_HOME>/repository/deployment/server/eventpublishers/MessageFlowConfigurationPublisher.xml file, and enter relevant configurations as described in the table below. This file is used to enter the information required to publish ESB data to the WSO2 EI Analytics server.

    PropertyRequired ValueExample
    usernameThe username to be used when accessing the WSO2 EI Analytics server to publish configurations.admin
    passwordThe password to be used when accessing the WSO2 EI Analytics server to publish configurations.admin
    receiverURLThe URL of the thrift port to which the EI configurations should be published. The format of the URL is as follows.
    tcp://<localhost>:<THRIFT_PORT>    		tcp://localhost:7612

  3. Open the <EI_HOME>/repository/deployment/server/eventpublishers/MessageFlowStatisticsPublisher.xml file, and do the configurations and specified in the table below. 

    PropertyRequired ValueExample
    usernameThe username to be used when accessing the WSO2 EI Analytics server to publish statistics.admin
    passwordThe password to be used when accessing the WSO2 EI Analytics server to publish statistics.admin
    receiverURLThe URL of the thrift port to which the EI statistics should be published. The format of the URL is as follows.
    tcp://<localhost>:<THRIFT_PORT>    		tcp://localhost:7612

  4. Change the hostname to the actual hostname in the <EI_HOME>/wso2/analytics/repository/deployment/server/jaggeryapps/portal/configs/designer.json file as follows. 

    Tip

    This step avoids the host verification errors that can occur when multiple WSO2 product instances publish statistics.

    Code Block
    languagejs
        },
    "host": {
        "hostname": "localhost",
        "port": "",
        "protocol": ""
    }
  5. Update the <EI_HOME>/wso2/analytics/conf/axis2/axis2.xml file as follows to enable Hazlecast clustering for both nodes.

    1. Set clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent" to true as shown below to enable Hazlecast clustering.

      Code Block
      languagexml
      <clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent" enable="true">

    2. Enable the wka mode for both nodes as shown below. See About Membership Schemes for more information on wka mode. 

      Code Block
      languagexml
      <parameter name="membershipScheme">wka</parameter>

    3. Add both the EI Analytics nodes as well known members in the cluster under the members tag in each node as shown in the example below.

      Tip

      The best practice is to add all the members (including itself) in all the nodes to avoid any conflicts in configurations.

      Code Block
      languagexml
      <members>
    <member>
        <hostName>[node1 IP]</hostName>
        <port>[node1 port]</port>
    </member>
    <member>
        <hostName>[node2 IP]</hostName>
        <port>[node2 port]</port>
    </member>
</members>

    4. For each node, enter the respective server IP address as the value forthe localMemberHost property as shown below.

      Code Block
      languagexml
      <parameter name="localMemberHost">[Server_IP_Address]</parameter>
    Expand
    titleClick here to view the complete clustering section of the axis2.xml file. with the changes mentioned above.
    Code Block
    languagexml
        <clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent"
                enable="true">

        <!--
           This parameter indicates whether the cluster has to be automatically initalized
           when the AxisConfiguration is built. If set to "true" the initialization will not be
           done at that stage, and some other party will have to explictly initialize the cluster.
        -->
        <parameter name="AvoidInitiation">true</parameter>

        <!--
           The membership scheme used in this setup. The only values supported at the moment are
           "multicast" and "wka"

           1. multicast - membership is automatically discovered using multicasting
           2. wka - Well-Known Address based multicasting. Membership is discovered with the help
                    of one or more nodes running at a Well-Known Address. New members joining a
                    cluster will first connect to a well-known node, register with the well-known node
                    and get the membership list from it. When new members join, one of the well-known
                    nodes will notify the others in the group. When a member leaves the cluster or
                    is deemed to have left the cluster, it will be detected by the Group Membership
                    Service (GMS) using a TCP ping mechanism.
        -->
        
        <parameter name="membershipScheme">wka</parameter>

        <!--<parameter name="licenseKey">xxx</parameter>-->
        <!--<parameter name="mgtCenterURL">http://localhost:8081/mancenter/</parameter>-->

        <!--
         The clustering domain/group. Nodes in the same group will belong to the same multicast
         domain. There will not be interference between nodes in different groups.
        -->
        <parameter name="domain">wso2.carbon.domain</parameter>

        <!-- The multicast address to be used -->
        <!--<parameter name="mcastAddress">228.0.0.4</parameter>-->

        <!-- The multicast port to be used -->
        <parameter name="mcastPort">45564</parameter>

        <parameter name="mcastTTL">100</parameter>

        <parameter name="mcastTimeout">60</parameter>

        <!--
           The IP address of the network interface to which the multicasting has to be bound to.
           Multicasting would be done using this interface.
        -->
        <!--
            <parameter name="mcastBindAddress">10.100.5.109</parameter>
        -->
        <!-- The host name or IP address of this member -->

        <parameter name="localMemberHost">[node IP]</parameter>

        <!--
            The bind adress of this member. The difference between localMemberHost & localMemberBindAddress
            is that localMemberHost is the one that is advertised by this member, while localMemberBindAddress
            is the address to which this member is bound to.
        -->
        <!--
        <parameter name="localMemberBindAddress">[node IP]</parameter>
        -->

        <!--
        The TCP port used by this member. This is the port through which other nodes will
        contact this member
         -->
        <parameter name="localMemberPort">[node port]</parameter>

        <!--
            The bind port of this member. The difference between localMemberPort & localMemberBindPort
            is that localMemberPort is the one that is advertised by this member, while localMemberBindPort
            is the port to which this member is bound to.
        -->
        <!--
        <parameter name="localMemberBindPort">4001</parameter>
        -->

        <!--
        Properties specific to this member
        -->
        <parameter name="properties">
            <property name="backendServerURL" value="https://${hostName}:${httpsPort}/services/"/>
            <property name="mgtConsoleURL" value="https://${hostName}:${httpsPort}/"/>
            <property name="subDomain" value="worker"/>
        </parameter>

        <!--
        Uncomment the following section to load custom Hazelcast data serializers.
        -->
        <!--
        <parameter name="hazelcastSerializers">
            <serializer typeClass="java.util.TreeSet">org.wso2.carbon.hazelcast.serializer.TreeSetSerializer
            </serializer>
            <serializer typeClass="java.util.Map">org.wso2.carbon.hazelcast.serializer.MapSerializer</serializer>
        </parameter>
        -->

        <!--
           The list of static or well-known members. These entries will only be valid if the
           "membershipScheme" above is set to "wka"
        -->
        <members>
            <member>
                <hostName>[node1 IP]</hostName>
                <port>[node1 port]</port>
            </member>
            <member>
                <hostName>[node2 IP]</hostName>
                <port>[node2 port]</port>
            </member>
        </members>

        <!--
        Enable the groupManagement entry if you need to run this node as a cluster manager.
        Multiple application domains with different GroupManagementAgent implementations
        can be defined in this section.
        -->
        <groupManagement enable="false">
            <applicationDomain name="wso2.as.domain"
                               description="AS group"
                               agent="org.wso2.carbon.core.clustering.hazelcast.HazelcastGroupManagementAgent"
                               subDomain="worker"
                               port="2222"/>
        </groupManagement>
    </clustering>

     

  6. Configure the  <EI_HOME>/wso2/analytics/conf/event-processor.xml file as follows to cluster ESB Analytics in the Receiver.

    1. Enable the HA mode by setting the following property.

      Code Block
      languagexml
      <mode name="HA" enable="true">

    2. Disable the Distributed mode by setting the following property.

      Code Block
      languagexml
      <mode name="Distributed" enable="false">

    3. For each node, enter the respective server IP address under the HA mode Config section as shown in the example below.

      Info

      When you enable the HA mode for WSO2 EI Analytics, state persistence is enabled by default. If there is no real time use case that requires any state information after starting the cluster, you should disable event persistence by setting the persistence attribute to false in the <EI_HOME>/wso2/analytics/conf/event-processor.xml file as shown below.

      Code Block
      languagexml
      <persistence enable="false">
    <persistenceIntervalInMinutes>15</persistenceIntervalInMinutes>
    <persisterSchedulerPoolSize>10</persisterSchedulerPoolSize>
    <persister class="org.wso2.carbon.event.processor.core.internal.persistence.FileSystemPersistenceStore">
        <property key="persistenceLocation">cep_persistence</property>
    </persister>
</persistence>
      Code Block
      languagexml
          <!-- HA Mode Config -->
    <mode name="HA" enable="true">
       ...
        <eventSync>
            <hostName>[Server_IP_Address]</hostName>
      Info

      When you enable persistance for the WSO2 EI Analytics profile, the internal state of EI Analytics is persisted in files. These files are not automatically deleted. Therefore, if you want to save space in your EI Analytics pack, you need to delete them manually.

      These files are created in the <EI_HOME>/wso2/analytics/cep_persistence/<tenant-id> directory. This directory has a separate sub-directory for each execution plan. Each execution plan can have multiple files. The format of each file name is <TIMESTAMP>_<EXECUTION_PLAN_NAME> (e.g, 1493101044948_MyExecutionPlan). If you want to clear files for a specific execution plan, you need to leave the two files with the latest timestamps and delete the rest.

    Expand
    titleClick here to view the complete event-processor.xml file with the changes mentioned above.
    Code Block
    languagexml
    <eventProcessorConfiguration>
    <mode name="SingleNode" enable="false">
        <persistence enable="false">
            <persistenceIntervalInMinutes>15</persistenceIntervalInMinutes>
            <persisterSchedulerPoolSize>10</persisterSchedulerPoolSize>
            <persister class="org.wso2.carbon.event.processor.core.internal.persistence.FileSystemPersistenceStore">
                <property key="persistenceLocation">cep_persistence</property>
            </persister>
        </persistence>
    </mode>

    <!-- HA Mode Config -->
    <mode name="HA" enable="true">
        <nodeType>
            <worker enable="true"/>
            <presenter enable="false"/>
        </nodeType>
        <checkMemberUpdateInterval>10000</checkMemberUpdateInterval>
        <eventSync>
            <hostName>172.18.1.217</hostName>
            <port>11224</port>
            <reconnectionInterval>20000</reconnectionInterval>
            <serverThreads>20000</serverThreads>
            <!--Size of TCP event publishing client's send buffer in bytes-->
            <publisherTcpSendBufferSize>5242880</publisherTcpSendBufferSize>
            <!--Character encoding of TCP event publishing client-->
            <publisherCharSet>UTF-8</publisherCharSet>
            <publisherBufferSize>1024</publisherBufferSize>
            <publisherConnectionStatusCheckInterval>30000</publisherConnectionStatusCheckInterval>
            <!--Number of events that could be queued at receiver before they are synced between CEP/DAS nodes-->
            <receiverQueueSize>1000000</receiverQueueSize>
            <!--Max total size of events that could be queued at receiver before they are synced between CEP/DAS nodes-->
            <receiverQueueMaxSizeMb>10</receiverQueueMaxSizeMb>
            <!--Number of events that could be queued at publisher to sync output between CEP/DAS nodes-->
            <publisherQueueSize>1000000</publisherQueueSize>
            <!--Max total size of events that could be queued at publisher to sync output between CEP/DAS nodes-->
            <publisherQueueMaxSizeMb>10</publisherQueueMaxSizeMb>
        </eventSync>
        <management>
            <hostName>172.18.1.217</hostName>
            <port>10005</port>
            <tryStateChangeInterval>15000</tryStateChangeInterval>
            <stateSyncRetryInterval>10000</stateSyncRetryInterval>
        </management>
        <presentation>
            <hostName>0.0.0.0</hostName>
            <port>11000</port>
            <!--Size of TCP event publishing client's send buffer in bytes-->
            <publisherTcpSendBufferSize>5242880</publisherTcpSendBufferSize>
            <!--Character encoding of TCP event publishing client-->
            <publisherCharSet>UTF-8</publisherCharSet>
            <publisherBufferSize>1024</publisherBufferSize>
            <publisherConnectionStatusCheckInterval>30000</publisherConnectionStatusCheckInterval>
        </presentation>
    </mode>

    <!-- Distributed Mode Config -->
    <mode name="Distributed" enable="false">
        <nodeType>
            <worker enable="true"/>
            <manager enable="true">
                <hostName>0.0.0.0</hostName>
                <port>8904</port>
            </manager>
            <presenter enable="false">
                <hostName>0.0.0.0</hostName>
                <port>11000</port>
            </presenter>
        </nodeType>
        <management>
            <managers>
                <manager>
                    <hostName>localhost</hostName>
                    <port>8904</port>
                </manager>
                <manager>
                    <hostName>localhost</hostName>
                    <port>8905</port>
                </manager>
            </managers>
            <!--Connection re-try interval to connect to Storm Manager service in case of a connection failure-->
            <reconnectionInterval>20000</reconnectionInterval>
            <!--Heart beat interval (in ms) for event listeners in "Storm Receivers" and "CEP Publishers" to acknowledge their
            availability for receiving events"-->
            <heartbeatInterval>5000</heartbeatInterval>
            <!--Storm topology re-submit interval in case of a topology submission failure-->
            <topologyResubmitInterval>10000</topologyResubmitInterval>
        </management>
        <transport>
            <!--Port range to be used for events listener servers in "Storm Receiver Spouts" and "CEP Publishers"-->
            <portRange>
                <min>15000</min>
                <max>15100</max>
            </portRange>
            <!--Connection re-try interval (in ms) for connection failures between "CEP Receiver" to "Storm Receiver" connections
            and "Storm Publisher" to "CEP Publisher" connections-->
            <reconnectionInterval>20000</reconnectionInterval>
            <!--Size of the output queue of each "CEP Receiver" which stores events to be published into "Storm Receivers" .
            This must be a power of two-->
            <cepReceiverOutputQueueSize>8192</cepReceiverOutputQueueSize>
            <!--Size of the output queue of each "Storm Publisher" which stores events to be published into "CEP Publisher" .
            This must be a power of two-->
            <stormPublisherOutputQueueSize>8192</stormPublisherOutputQueueSize>
            <!--Size of TCP event publishing client's send buffer in bytes-->
            <tcpEventPublisherSendBufferSize>5242880</tcpEventPublisherSendBufferSize>
            <!--Character encoding of TCP event publishing client-->
            <tcpEventPublisherCharSet>UTF-8</tcpEventPublisherCharSet>
            <!--Size of the event queue in each storm spout which stores events to be processed by storm bolts -->
            <stormSpoutBufferSize>10000</stormSpoutBufferSize>
            <connectionStatusCheckInterval>20000</connectionStatusCheckInterval>
        </transport>
        <presentation>
            <presentationOutputQueueSize>1024</presentationOutputQueueSize>
            <!--Size of TCP event publishing client's send buffer in bytes-->
            <tcpEventPublisherSendBufferSize>5242880</tcpEventPublisherSendBufferSize>
            <!--Character encoding of TCP event publishing client-->
            <tcpEventPublisherCharSet>UTF-8</tcpEventPublisherCharSet>
            <connectionStatusCheckInterval>20000</connectionStatusCheckInterval>
        </presentation>
        <statusMonitor>
            <lockTimeout>60000</lockTimeout>
            <updateRate>60000</updateRate>
        </statusMonitor>
        <stormJar>org.wso2.cep.storm.dependencies.jar</stormJar>
        <distributedUIUrl></distributedUIUrl>
        <memberUpdateCheckInterval>20000</memberUpdateCheckInterval>
    </mode>
</eventProcessorConfiguration>
    Info

    The following node types are configured for the HA deployment mode in the <EI-ANALYTICS_HOME>/repository/conf/event-processor.xml file.

    • eventSync: Both the active and the passive nodes in this setup are event synching nodes. Therefore, each node should have the host and the port on which it is operating specified under the <eventSync> element.
    • management: In this setup, both the nodes carry out the same tasks, and therefore, both nodes are considered manager nodes. Therefore, each node should have the host and the port on which it is operating specified under the <management> element.
    • presentation: You can optionally specify only one of the two nodes in this setup as the presenter node. The dashboards in which processed information is displayed are configured only in the presenter node. Each node should have the host and the port on which the assigned presenter node is operating specified under the <presentation> element. The host and the port as well as the other configurations under the <presentation> element are effective only when the presenter enable="false property is set under the <!-- HA Mode Config --> section.

  7. Update the <EI_HOME>/wso2/analytics/conf/analytics/spark/spark-defaults.conf file as follows to use the Spark cluster embedded within EI Analytics.

    • Keep the carbon.spark.master configuration as local. This instructs Spark to create a Spark cluster using the Hazelcast cluster.

    • Enter 2 as the value for the carbon.spark.master.count configuration. This specifies that there should be two masters in the Spark cluster. One master serves as an active master and the other serves as a stand-by master. 

    The following example shows the <EI_HOME>/wso2/analytics/conf/analytics/spark/spark-defaults.conf file with changes mentioned above.

    Code Block
    carbon.spark.master local
carbon.spark.master.count 2

    For more information, see Spark Configurations in DAS documentation.

    Warning

    Important: If the path to <EI_HOME>/wso2/analytics is different in the two nodes, do the following. 

    Localtabgroup
    Localtab
    activetrue
    titleUNIX environment

    Follow the steps below to create a symbolic link to <EI_HOME>/wso2/analytics in both nodes, where paths of those symbolic links are identical. This ensures that if we use the symbolic link to access the EI Analytics server, we can use a common path.

    1. Set the following property in the <EI_HOME>/wso2/analytics/conf/analytics/spark/spark-defaults.conf file: carbon.das.symbolic.link/home/ubuntu/das/das_symlink/

    2. Execute the following command to create the das_symlink/ directory: ln -s <EI_HOME>/usr/share/das/das_symlink

    3. Add the following system properties to the <EI_HOME>/wso2/analytics/bin/wso2server.sh file to use the altered directory.

      Code Block
      languageapplescript
      -Dcarbon.das.symlink.config.dir.path=<SYM_LINK_PATH>/conf
-Dcarbon.das.symlink.external.lib.dir.path=<SYM_LINK_PATH>/../../lib
-Dcarbon.das.symlink.dropins.dir.path=<SYM_LINK_PATH>/../../dropins
-Dcarbon.das.symlink.internal.lib.dir.path=<SYM_LINK_PATH>/../lib
-Ddas.symlink.components.repo=<SYM_LINK_PATH>/../components/plugins
    4. Replace the export CARBON_CONFIG_DIR_PATH=$CARBON_HOME/conf line with the following in the <EI_HOME>/wso2/analytics/bin/load-spark-env-vars file: export CARBON_CONFIG_DIR_PATH=<SYM_LINK_PATH>/conf
    Localtab
    titleWindows environment

    In the Windows environment there is a strict requirement to have both EI Analytics profiles in a common path.

  8. In order to share the C-Apps deployed among the nodes, configure the SVN-based deployment synchronizer. For detailed instructions, see WSO2 Clustering Guide - Configuring SVN-Based Deployment Synchronizer.

    Tip

    EI Analytics Minimum High availability Deployment set up does not use a manager and a worker. For the purpose of configuring the deployment synchronizer, you can add the configurations relevant to the manager for the node of your choice, and add the configurations relating to the worker for the other node.

    Info

    If you do not configure the deployment synchronizer, you are required to deploy any C-App you use in the EI Analytics Minimum High Availability Deployment set up to both the nodes.

...