Page Comparison

The WSO2 JMS transport can be configured with IBM® WebSphere® MQ. The following topics cover the configuration steps.

Table of Contents

maxLevel	3
minLevel	3

Info
The configuration steps below are for a Windows environment. Similar steps apply for other environments such as OSX and Linux.

Prerequisites

WSO2 Enterprise Interator (WSO2 EI) is installed. To test the samples, you must also have Apache Ant installed. For details, see Installation Prerequisites.
WebSphere MQ is installed and the latest fix pack applied (see the IBM documentation). The fix pack can be obtained from http://www-01.ibm.com/software/integration/wmq.

Creating queue manager, queue and channel in IBM WebSphere MQ

...

In the page for entering configuration options, select the following. Then click Next.

Field Name	Value
Start queue manager after it has been created check box	If this is selected, the queue manager will start running immediately after it is created.
Automatic field	If this is selected, the queue manager is automatically started when the machine starts up.

Configure the following in the page for entering listener options.

...

Note

From the below configurations, do the ones in the axis2.xml file based on the profile you use as follows:

To enable the JMS transport in the Integration profile, edit the <EI_HOME>/conf/axis2/axis2.xml file.
To enable the JMS transport in other profiles, edit the <EI_HOME>/wso2/<PROFILE_HOME>/conf/axis2/axis2.xml file. <PROFILE_HOME> refers to the main directory of the profile inside the WSO2 EI distribution. For example, to enable the JMS transport in the Business Process profile, edit the <EI_HOME>/wso2/business-process/conf/axis2/axis2.xml file

Info
The configuration steps below are for a Windows environment. Similar steps apply for other environments such as OSX and Linux.

Prerequisites

WSO2 Enterprise Interator (WSO2 EI) is installed. To test the samples, you must also have Apache Ant installed. For details, see Installation Prerequisites.
WebSphere MQ is installed and the latest fix pack applied (see the IBM documentation). The fix pack can be obtained from http://www-01.ibm.com/software/integration/wmq. (These instructions are tested on IBM WebSphere MQ version 8.0.0.4.)

Creating queue manager, queue and channel in IBM WebSphere MQ

Start IBM WebSphere MQ Explorer as an administrator. If you are not running on an administrator account, right-click on the IBM WebSphere MQ icon/menu item and then click Run as Administrator.
Right-click on Queue Managers, move the cursor to New and then click Queue Manager to open the Create Queue Manager wizard. Enter ESBQManager as the queue manager name. Make sure you select make this the default queue manager check box. Leave the default values unchanged in the other fields. Click Next to move to the next page.
Click Next in the page for entering data and log values without changing any default values.

In the page for entering configuration options, select the following. Then click Next.

Field Name	Value
Start queue manager after it has been created check box	If this is selected, the queue manager will start running immediately after it is created.
Automatic field	If this is selected, the queue manager is automatically started when the machine starts up.

Configure the following in the page for entering listener options.

Field Name	Value
Create listener configured for TCP/IP check box	Select this check box to create the listener.
Listen on port number field	Enter the number of the port where you want to set the listener. In this example, the port number will be 1414.

Click Next and then click Finish to save the configuration. The queue manager will be created as shown below.
Expand the navigation tree of the ESBQManager queue manager in the navigation tree. Right-click on Queues, move the cursor to New and then click Local Queue to open the Create a Local Queue wizard. Enter the local queue name as LocalQueue1 and complete running the wizard. Leave the default values of all other fields unchanged, and click Finish to save the local queue.
Anchor
Qmanager
Qmanager
Right-click on Channels, move the cursor to New, and then click Server-connection Channel to open the Create a Server-connection Channel wizard. Enter myChannel as the channel name and click Next. Make sure that the value for the Transmission Protocol is TCP. Leave the default values unchanged for the rest of the fields, and click Finish to save the channel.

...

Code Block
runmqsc ESBQManager

Code Block
ALTER QMGR CHLAUTH(DISABLED)

Code Block
REFRESH SECURITY TYPE(CONNAUTH)

The following will be displayed in the command prompt.

Configuring

...

the ESB JMS transport

...

Add the following transport receiver to the <EI_HOME>/conf/axis2/axis2.xml file.

...

language	xml

...

Info

If you use the default configuration of the IBM MQ queue manager, you need to provide username and password client authentication. The username and password that you need to provide here is the username and password that you provide to log on to your operating system.
The vender.class.loader.enabled parameter in the above configuration should be added only when you use IBM Websphere MQ as the JMS broker.
WSO2 uses some external class loader mechanisms for some external products such as QPID and AMQP due to the limitation of serializing the JMSObject message. However, it is not required to use this mechanism for IBM Websphere MQ. By adding the vender.class.loader.enabled parameter, you can skip the external class loader for IBM Websphere MQ.
This property can also be included in a proxy service, REST API, message store, JMS receiver or the Synapse configuration depending on the use case.
If you are using Windows Operating Systems (e.g., Windows 10), mention the .bindings file location starting with file:/// format, in the below <transportReceiver'> and <transportSender> configurations in the <EI_HOME>/repository/conf/axis2/axis2.xml file as follows: <parameter name="java.naming.provider.url"

...

locked="false">file:///G:/jndidirectory<

...

/parameter>

Add the following transport receiver to the <EI_HOME>/conf/axis2/axis2.xml file.

Code Block

language	xml

<transportReceiver name="jms" class="org.apache.axis2.transport.jms.ConnectionFactoryJNDINameJMSListener" locked>
  <parameter name="default" locked="false">
    <parameter name="java.naming.factory.initial" locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/G:/jndidirectory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MyQueueConnectionFactory</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.UserName" locked="false">nandika</parameter>
    <parameter name="transport.jms.Password" locked="false">password</parameter>
  </parameter>


  <parameter name="myQueueConnectionFactory1" locked="false">
    <parameter name="java.naming.factory.initial" locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/G:/jndidirectory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MyQueueConnectionFactory</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.UserName" locked="false">nandika</parameter>
    <parameter name="transport.jms.Password" locked="false">password</parameter>
  </parameter>
</transportReceiver>

Add the following transport sender to the <EI_HOME>/conf/axis2/axis2.xml file.

Code Block

language	xml

<transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender">
  <parameter name="default" locked="false">
    <parameter name="vender.class.loader.enabled">false</parameter>
	<parameter name="java.naming.factory.initial" locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/G:/jndidirectory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MyQueueConnectionFactory</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.UserName" locked="false">nandika</parameter>
    <parameter name="transport.jms.Password" locked="false">password</parameter>
  </parameter>

  <parameter name="myQueueConnectionFactory1" locked="false">
    <parameter name="java.naming.factory.initial" locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/G:/jndidirectory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MyQueueConnectionFactory</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.UserName" locked="false">nandika</parameter>
    <parameter name="transport.jms.Password" locked="false">password</parameter>
  </parameter>
</transportSender>

Info

title	Note

If you use the default configuration of the IBM MQ queue manager, you need to provide username and password client authentication. The username and password that you need to provide here is the username and password that you provide to log on to your operating system.

Info

The vender.class.loader.enabled parameter in the above configuration should be added only when you use IBM Websphere MQ as the JMS broker.

WSO2 uses some external class loader mechanisms for some external products such as QPID and AMQP due to the limitation of serializing the JMSObject message. However, it is not required to use this mechanism for IBM Websphere MQ. By adding the vender.class.loader.enabled parameter, you can skip the external class loader for IBM Websphere MQ.

This property can also be included in a proxy service, REST API, message store, JMS receiver or the Synapse configuration depending on the use case.

Copying IBM Websphere MQ libraries

...

In <EI_HOME>\conf\axis2\axis2.xml, comment out both the myTopicConnectionFactory parameter and the SQProxyCF parameter. It should look as shown below.

Code Block

language	html/xml

<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
    <!--parameter name="myTopicConnectionFactory" locked="false"> 
      <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
      <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
      <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter>
      <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter--> 

    <!--parameter name="SQProxyCF" locked="false">
      <parameter name="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
      <parameter name="java.naming.provider.url">file:/C:/JNDI-Directory</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
      <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
      <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter-->

    <parameter name="default" locked="false">
      <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
      <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
      <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
      <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter>
</transportReceiver>

Start the WSO2 EI with the Sample 251 configuration using the following command.
wso2ei-samples.bat -sn 251
Log into the WSO2 EI management console at: https://localhost:8243/carbon/.
Select Service Bus -> Source view and update the JMS URL as follows.
jms:/JMS_QUEUE?transport.jms.ConnectionFactoryJNDIName=MQ_JMS_MANAGER&java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory&java.naming.provider.url=file:/C:/JNDI-Directory&transport.jms.DestinationType=queue&transport.jms.ConnectionFactoryType=queue &transport.jms.Destination=JMS_QUEUE

Configure the proxy service as follows.

Code Block

language	html/xml

<definitions xmlns="http://ws.apache.org/ns/synapse">
  <proxy name="StockQuoteProxy" transports="https http jms" startOnLoad="true" trace="disable">
    <target>
      <endpoint>
        <address uri="jms:/JMS_QUEUE?transport.jms.ConnectionFactoryJNDIName=MQ_JMS_MANAGER&java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory&java.naming.provider.url=file:/C:/JNDI-Directory&transport.jms.DestinationType=queue&transport.jms.ConnectionFactoryType=queue&transport.jms.Destination=JMS_QUEUE"/>
      </endpoint>
      <inSequence>
        <property name="TRANSPORT_HEADERS" scope="axis2" action="remove"/>
        <property name="OUT_ONLY" value="true"/>
      </inSequence>
      <outSequence>
        <send/>
      </outSequence>
    </target>
    <publishWSDL uri="file:samples/service-bus/resources/proxy/sample_proxy_1.wsdl"/>
  </proxy>
  <sequence name="fault">
    <log level="full">
      <property name="MESSAGE" value="Executing default "fault" sequence"/>
      <property name="ERROR_CODE" expression="get-property('ERROR_CODE')"/>
      <property name="ERROR_MESSAGE" expression="get-property('ERROR_MESSAGE')"/>
    </log>
    <drop/>
  </sequence>
  <sequence name="main">
    <log/>
    <drop/>
  </sequence>
</definitions>

Comment out myTopicConnectionFactory and uncomment SQProxyCF in the <EI_HOME>\samples\axis2Server\repository\conf\axis2.xml file as follows.

Code Block

language	html/xml

  <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
    <!--parameter name="myTopicConnectionFactory" locked="false"> 
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter-->

    <parameter name="SQProxyCF" locked="false">
     <parameter name="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
     <parameter name="java.naming.provider.url">file:/C:/JNDI-Directory</parameter>
     <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter>

    <parameter name="default" locked="false"> 
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter>
  </transportReceiver>

Start the axis2 Server with the following command.
axis2Server.bat

Add the following parameters to service.xml in <EI_HOME>\samples\axis2Server\repository\services\SimpleStockQuoteService.aar.

Code Block
<parameter name="transport.jms.ConnectionFactory">SQProxyCF</parameter> <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>

Send the request from the JMS client, and the sample Axis2 server console will print a message as follows.
Code Block
language none
ant stockquote -Daddurl=http://localhost:8280/services/StockQuoteProxy -Dmode=placeorder -Dsymbol=MSFT

Topic Scenario 1: Client to Topic to WSO2 EI
Anchor
TopicScenario1
TopicScenario1

In this scenario, the JMS client places an order on the topic ivtT. The WSO2 EI listens to this topic, gets the message, and sends it to the back-end server to process the request.

In <EI_HOME>\conf\axis2\axis2.xml , uncomment the myTopicConnectionFactory parameter and comment out the SQProxyCF parameter. It should look as shown below.

Code Block

language	xml

  <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
    <parameter name="myTopicConnectionFactory" locked="false"> 
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter>

    <!--parameter name="SQProxyCF" locked="false">
     <parameter name="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
     <parameter name="java.naming.provider.url">file:/C:/JNDI-Directory</parameter>
     <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter-->

    <parameter name="default" locked="false"> 
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
     <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
     <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
    </parameter>
  </transportReceiver>

Start WSO2 EI with the Sample 250 configuration by running the following command.
wso2ei-samples.bat -sn 250
Log in to the server management console at: https://localhost:8243/carbon/.
Click web services -> list -> StockQuoteProxy -> edit (Specific Configuration)
Add a service parameter as follows and save it.
name = transport.jms.ConnectionFactory value = myTopicConnectionFactory
Go to the <EI_HOME>/samples/axis2Client directory and build it using the ant command.
Go to the <EI_HOME>/samples/axis2Client /src/samples/userguide directory, open the GenericJMSClient.java source file, and make the following changes in the code.
1. Set the jms_dest property default value to ivtT (line 45)
2. Set the java.naming.provider.url to file:/C:/JNDI-Directory" (line 82)
3. Set the java.naming.factory.initial to com.sun.jndi.fscontext.RefFSContextFactory (line 85)
4. Set the lookup key to MQ_JMS_MANAGER (line 89)

Configure the proxy configuration so that it appears as follows.

Code Block

language	html/xml

<definitions xmlns="http://ws.apache.org/ns/synapse">
  <proxy name="StockQuoteProxy" transports="https http jms" startOnLoad="true" trace="disable">
    <target>
      <endpoint>
        <address uri="http://localhost:9000/services/SimpleStockQuoteService"/>
      </endpoint>
      <inSequence>
        <property name="OUT_ONLY" value="true"/>
      </inSequence>
      <outSequence>
        <send/>
      </outSequence>
    </target>
    <publishWSDL uri="file:samples/service-bus/resources/proxy/sample_proxy_1.wsdl"/>
    <parameter name="transport.jms.ContentType">
      <rules>
        <jmsProperty>contentType</jmsProperty>
        <default>application/xml</default>
      </rules>
    </parameter>
    <parameter name="transport.jms.ConnectionFactory">myTopicConnectionFactory</parameter>
  </proxy>
  <sequence name="fault">
    <log level="full">
      <property name="MESSAGE" value="Executing default "fault" sequence"/>
      <property name="ERROR_CODE" expression="get-property('ERROR_CODE')"/>
      <property name="ERROR_MESSAGE" expression="get-property('ERROR_MESSAGE')"/>
    </log>
    <drop/>
  </sequence>
  <sequence name="main">
    <log/>
    <drop/>
  </sequence>
</definitions>

Comment out the non-default connection factories in the <EI_HOME>\samples\axis2Server\repository\conf\axis2.xml file so that it looks as follows.

Code Block

language	html/xml

<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
  <!--parameter name="myTopicConnectionFactory" locked="false">
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter>
    <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
  </parameter-->

  <!--parameter name="SQProxyCF" locked="false">
    <parameter name="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url">file:/C:/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.Destination">JMS_QUEUE</parameter>
  </parameter-->

  <parameter name="default" locked="false">
    <parameter name="java.naming.factory.initial" 
locked="false">com.sun.jndi.fscontext.RefFSContextFactory</parameter>
    <parameter name="java.naming.provider.url" locked="false">file:/D/JNDI-Directory</parameter>
    <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">MQ_JMS_MANAGER</parameter>
    <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    <parameter name="transport.jms.Destination">bogusq</parameter>
  </parameter>
</transportReceiver>

Start the axis2 server with the following command.
axis2Server.bat
Send the request from the JMS client, and the sample Axis2 server console will print a message.

...

Versions Compared

Old Version 8

New Version Current

Key

Prerequisites

Creating queue manager, queue and channel in IBM WebSphere MQ

Prerequisites

Creating queue manager, queue and channel in IBM WebSphere MQ

Configuring

the ESB JMS transport

Copying IBM Websphere MQ libraries

Topic Scenario 1: Client to Topic to WSO2 EI
Anchor
TopicScenario1
TopicScenario1

Page Comparison

Versions Compared

Old Version 8

New Version Current

Key

Prerequisites

Creating queue manager, queue and channel in IBM WebSphere MQ

Prerequisites

Creating queue manager, queue and channel in IBM WebSphere MQ

Configuring

the ESB JMS transport

Copying IBM Websphere MQ libraries

Topic Scenario 1: Client to Topic to WSO2 EI AnchorTopicScenario1TopicScenario1

Topic Scenario 1: Client to Topic to WSO2 EI
Anchor
TopicScenario1
TopicScenario1