Page Comparison

In WSO2 API Manager 1.10.0(WSO2 APIM), you can configure Analytics either via the UI or XML.

Note
If you wish to configure Analytics in WSO2 API Manager via the UI, see Publishing API Runtime Statistics.

Follow the instructions below to configure Analytics in APIM WSO2 API Manager using XML:

Open the <APIM_HOME>/repository/conf/api-manager.xml file.
Carry out the following configuration changes under the <APIUsageTracking> element in the XML file.
1. Enable Analytics in APIM by uncommenting and setting the <Enabled> element to true.
  Code Block
  <Enabled>true</Enabled>
2. Define the <DASServerURL> value based on the WSO2 Data Analytics Server (WSO2 DAS) receivers.
  Code Block
  title Example
  <DASServerURL> {tcp://localhost:7612/,tcp://localhost:7613/} </DASServerURL>
3. Define the <DASUsername> and <DASPassword> based on the DAS receivers.
4. Define the <DASRestApiURL> element according to the DAS master node, because this URL is used to fetch data from DAS REST API.
5. Set the <DASRestApiUsername> and <DASRestApiPassword> element according to the DAS REST API.
Use the default configurations for the other configurations in the <APIUsageTracking> section.
Configure the statistics client.
Set the RDBMS client using the <StatisticClientProvider> element in the <APIM_HOME>/repository/conf/api-manager.xml file as follows:
By default APIM is configured for the DAS REST client. Therefore, disable the REST client by commenting out the following:
<APIUsageTracking> section.
Code Block
 
Set the RDBMS client by uncommenting the following:
Tip
The RDBMS client is the recommended option when using Analytics with APIM in production.
Code Block <StatisticClientProvider>org.wso2.carbon.apimgt.
usage
.client.impl.APIUsageStatisticsRdbmsClientImpl</StatisticClientProvider>
Define a datasource for the RDBMS client.
Do this by adding the following configuration in both the <APIM_HOME>/repository/conf/datasources/master-datasources.xml and <DAS_HOME>/repository/conf/datasources/master-datasources.xml files.
Code Block<datasource> <name>WSO2AM_STATS_DB</name> <description>The datasource used for registry and user manager</description> <jndiConfig> <name>jdbc/WSO2AM_STATS_DB</name> </jndiConfig> <definition type="RDBMS"> <configuration> <url>jdbc:mysql://localhost:3306/APIM_STAT?autoReconnect=true&</url> <username>root</username>
<password>pass</password> <driverClassName>com.mysql.jdbc.Driver</driverClassName> <maxActive>50</maxActive> <maxWait>60000</maxWait> <testOnBorrow>true</testOnBorrow> <validationQuery>SELECT 1</validationQuery> <validationInterval>30000</validationInterval> <defaultAutoCommit>false</defaultAutoCommit> </configuration> </definition> </datasource>
Copy the appropriate RDBMS driver into both the WSO2 DAS and WSO2 APIM /repository/components/lib directories.

Deploy CApp.
As the summarization logic is defined in the DAS CApp, you need to depoy it in all the DAS nodes. When configuring Analytics using XML, you need to deploy the CApp manually.

Info
If you were to configure Analytics via the UI the CApp deployment process takes place automatically. The APIM Analytics related CApps are found in the `<APIM_HOME>/statistics` directory. Use the `API_Manager_Analytics_RDBMS.car` for RDBMS configurations and the `API_Manager_Analytics_REST.car` for the REST client.

Use one of the following methods to deploy the CApp into DAS.

Copy the

<APIM_HOME>/statistics/API_Manager_Analytics_RDBMS.car

file into the

<DAS_HOME>/repository/deployment/server/carbonapps

directory. If the

/carbonapps

directory does not exist create the directory. Thereafter, restart WSO2 DAS.

Start WSO2 DAS and sign in to the DAS Management Console. Navigate to the main menu and click Carbon Applications. Click Add and deploy the CApp which is in the <APIM_HOME>/statistics directory.

Code Block

<!-- API usage

tracker configuration used by the DAS data publisher and
        Google Analytics publisher in API gateway.
    -->
    <APIUsageTracking>

        <!--
            Below property is used to enable API Manager analytics configuration via api-manager.xml
            Enabling analytics via a configuration file can be useful in scenarios such as automated deployments where
            UI integration is inconvenient.

            If you uncomment this property, analytics configurations added via admin-dashboard UI will
            get overwritten by tha configuration details provided below when you restart the server.
        -->
        <Enabled>true</Enabled>

        <!--
            Server URL of the remote DAS/CEP server used to collect statistics. Must
            be specified in protocol://hostname:port/ format.

            An event can also be published to multiple Receiver Groups each having 1 or more receivers. Receiver
            Groups are delimited by curly braces whereas receivers are delimited by commas.
        Ex - Multiple Receivers within a single group
         tcp://localhost:7612/,tcp://localhost:7613/,tcp://localhost:7614/
        Ex - Multiple Receiver Groups with two receivers each
                 {tcp://localhost:7612/,tcp://localhost:7613},{tcp://localhost:7712/,tcp://localhost:7713/}
        -->
        <DASServerURL>{tcp://localhost:7612/}</DASServerURL>

        <!--
            Administrator username to login to the remote DAS server.
        -->
        <DASUsername>admin</DASUsername>

        <!--
            Administrator password to login to the remote DAS server.
        -->
        <DASPassword>admin</DASPassword>

        <!--
            DAS REST API configuration
                Set the values if .'org.wso2.carbon.apimgt.usage.client.impl.APIUsageStatisticsRestClientImpl'
                is used as Statistic Client
        -->
        <DASRestApiURL>https://localhost:9444</DASRestApiURL>
        <DASRestApiUsername>admin</DASRestApiUsername>
        <DASRestApiPassword>admin</DASRestApiPassword>

        <!--
            Below property is used to skip trying to connect to event receiver nodes when publishing events even if
            the stats enabled flag is set to true.
        -->
        <SkipEventReceiverConnection>false</SkipEventReceiverConnection>

        <!--
            API Usage Data Publisher.
        -->
        <PublisherClass>org.wso2.carbon.apimgt.usage.publisher.APIMgtUsageDataBridgeDataPublisher</PublisherClass>

        <!--
            If below property set to true,then the response message size will be calculated and publish 
            with each successful API invocation event.
        -->
        <PublishResponseMessageSize>false</PublishResponseMessageSize>
        <!--
                Data publishing stream names and versions of API requests, responses and faults. If the default values
                are changed, the toolbox also needs to be changed accordingly.
        -->
        <Streams>
            <Request>
                <Name>org.wso2.apimgt.statistics.request</Name>
                <Version>1.0.0</Version>
            </Request>
            <Response>
                <Name>org.wso2.apimgt.statistics.response</Name>
                <Version>1.0.0</Version>
            </Response>
            <Fault>
                <Name>org.wso2.apimgt.statistics.fault</Name>
                <Version>1.0.0</Version>
            </Fault>
            <Destination>
                <Name>org_wso2_apimgt_statistics_destination</Name>
                <Version>1.0.0</Version>
                <BAMProfileName>bam-profile</BAMProfileName>
            </Destination>
            <Throttle>
                <Name>org.wso2.apimgt.statistics.throttle</Name>
                <Version>1.0.0</Version>
            </Throttle>
            <Workflow>
                <Name>org.wso2.apimgt.statistics.workflow</Name>
                <Version>1.0.0</Version>
            </Workflow>
        </Streams>

    </APIUsageTracking>

Configure the statistics client.

Localtabgroup

Localtab

active	true
id	RDBMS-stat-client
title	RDBMS client

Set the RDBMS client using the <StatisticClientProvider> element in the <APIM_HOME>/repository/conf/api-manager.xml file as follows:

By default APIM is configured for the DAS REST client. Therefore, disable the REST client by commenting out the following:

Code Block
<!-- For APIM implemented Statistic client for DAS REST API --> <!-- StatisticClientProvider>org.wso2.carbon.apimgt.usage.client.impl.APIUsageStatisticsRestClientImpl</StatisticClientProvider -->

Set the RDBMS client by uncommenting the following:
Code Block
<!-- For APIM implemented Statistic client for

DAS REST

1. RDBMS

API

1. -->

<!--StatisticClientProvider>org

<StatisticClientProvider>org.wso2.carbon.apimgt.usage.client.impl.

APIUsageStatisticsRestClientImpl</StatisticClientProvider-->

APIUsageStatisticsRdbmsClientImpl</StatisticClientProvider>

Define a datasource for the RDBMS client.
Do this by adding the following configuration in both the <APIM_HOME>/repository/conf/datasources/master-datasources.xml and <DAS_HOME>/repository/conf/datasources/master-datasources.xml files.

Code Block

<datasource>
    <name>WSO2AM_STATS_DB</name>
    <description>The datasource used for registry and user manager</description>
    <jndiConfig>
        <name>jdbc/WSO2AM_STATS_DB</name>
    </jndiConfig>
    <definition type="RDBMS">
        <configuration>
            <url>jdbc:mysql://localhost:3306/APIM_STAT?autoReconnect=true&</url>
            <username>root</username>
            <password>pass</password>
            <driverClassName>com.mysql.jdbc.Driver</driverClassName>
            <maxActive>50</maxActive>
            <maxWait>60000</maxWait>
            <testOnBorrow>true</testOnBorrow>
            <validationQuery>SELECT 1</validationQuery>
            <validationInterval>30000</validationInterval>
            <defaultAutoCommit>false</defaultAutoCommit>
        </configuration>
    </definition>
</datasource>

If you are using MySQL as the database, run <APIM_HOME>/dbscript/stat/sql/mysql.sql to create scemas in the database. Use the appropriate script according to your database.
Copy the appropriate RDBMS driver into both the WSO2 DAS and WSO2 APIM /repository/components/lib directories.

Localtab

id	REST-stat-client
title	REST client

Set the REST client using the <StatisticClientProvider> element in the <APIM_HOME>/repository/conf/api-manager.xml file as follows:

By default APIM is configured for the DAS REST client. However, if it has been disabled, enable it by uncommenting the following:

Code Block
<!-- For APIM implemented Statistic client for DAS REST API --> <StatisticClientProvider>org.wso2.carbon.apimgt.usage.client.impl.APIUsageStatisticsRestClientImpl</StatisticClientProvider>

Disable the RDBMS client if it has been already enabled by commenting the following:
Code Block

<StatisticClientProvider>org

<!-- StatisticClientProvider>org.wso2.carbon.apimgt.usage.client.impl.APIUsageStatisticsRdbmsClientImpl</

StatisticClientProvider>

StatisticClientProvider-->

Deploy CApp.
As the summarization logic is defined in the DAS CApp, you need to depoy it in all the DAS nodes. When configuring Analytics using XML, you need to deploy the CApp manually.
Info
If you were to configure Analytics via the UI the CApp deployment process takes place automatically.
Use one of the following methods to deploy the CApp into DAS.
1. Deploy the CApp via the file system.
  1. Copy the respective CAR file into the <DAS_HOME>/repository/deployment/server/carbonapps directory.
    
    Stats Client CAR file
    RDBMS client <APIM_HOME>/statistics/API_Manager_Analytics_RDBMS.car
    REST client <APIM_HOME>/statistics/API_Manager_Analytics_REST.car
    Tip
    If the /carbonapps directory does not exist create the directory.
  2. Restart WSO2 DAS.
2. Deploy the CApp via the UI
  1. Start WSO2 DAS and sign in to the DAS Management Console.
  2. Navigate to the main menu and click Carbon Applications.
  3. Click Add and deploy the CApp which is in the <APIM_HOME>/statistics directory.

Versions Compared

Old Version 9

New Version Current

Key