Unknown macro: {next_previous_link3}
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

This page is currently under construction.

This section explains how to upgrade to DAS 3.2.0 from DAS 3.1.0. For more information on release versions, see the Release Matrix.

You cannot roll back the upgrade process. However, it is possible to restore a backup of the previous database so that you can restart the upgrade progress.

Preparing to upgrade

Before upgrading to WSO2 DAS 3.2.0, complete the following:

  • Make a backup of the DAS 3.1.0 database and copy the <DAS-3.1.0_HOME> directory in order to backup the product configurations.
  • Download any CAR files that are deployed in the DAS server and save them. Then delete them from DAS 3.1.0. This removes the scheduled tasks relating to the deployed artifacts and allows migration to be carried out smoothly. For more information, see Packaging Artifacts as a C-App Archive.
  • Download WSO2 3.2.0 from here.
  • Make the required changes in the datasource files in the <DAS-3.2.0_HOME>/repository/conf/datasources directory to make sure that they are configured as required. For more information, see Datasources.

Migrating analytics tables

If you want to connect your WSO2 Data Analytics Server 3.2.0 installation to the same databases that were used with your Data Analytics Server 3.1.0 installation, replace the configurations in the <DAS_3.2.0_HOME>/repository/conf/analytics/rdbms-config.xml file ith that of the <DAS_3.1.0_HOME>/repository/conf/analytics/rdbms-config.xml file.

Migrating the configurations

Once you have completed the database upgrade, You can proceed with the configuration changes as explained below. The configurations can be directly migrated from DAS 3.1.0 to DAS 3.2.0.

 Configurations should not be copied directly between servers.

To connect DAS 3.2.0 to the upgraded database, configure the following files:

  1. Go to the <DAS-3.2.0_HOME>/repository/conf directory and update the datasource references in the user-mgt.xml and registry.xml files to match the updated configurations in the master-datasources.xml file that you made in the above step.
    For detailed instructions to configure the user-mgt.xml file, see User Management.
    For detailed instructions to configure the registry.xml file, see Registry.
  2. Compare the configuration files in the <DAS_HOME>/repository/conf/data-bridge directory for DAS 3.1.0, and 3.2.0.

  3. Compare the configuration files in the <DAS_HOME>/repository/conf/analytics directory for DAS 3.1.0, and 3.2.0. Change the default values in DAS 3.2.0 to the same values you have specified in DAS 3.1.0.

    In DAS 3.2.0 following files are moved to <DAS_HOME>repository/conf/data directory because these runtime configuration files are required for the indexing operation. This is also mentioned under Migrating indexing information.

    • my-node-id.conf

    • local-shard-allocation.conf

  4. Change the default values in <DAS_3.2.0_HOME>/repository/conf/event-processor.xml file to the same values you have specified in the <DAS_3.1.0_HOME>/repository/conf/event-processor.xml file.

    • In DAS 3.2.0, we have introduced a parameter for single-node persistence in the event-processor.xml file. The deployment mode is set to single-node deploment by default as shown below.
      <mode name="Single" enable="true"> 
      If the existing mode in DAS_3.1.0 is HA, you have to disable the Single mode and enable the HA mode in DAS_3.2.0 as shown below.
        <mode name="Single" enable="false">
      <mode name="HA" enable="true">  
       

    • If you enable the HA mode for WSO2 DAS by setting the <mode name="HA" enable="true"> property in the event-processor.xml file, state persistence is enabled by default. If there is no real time use case that requires any state information after starting the cluster, you should disable event persistence by setting the persistence attribute to false in the same file as shown below.

      <persistence enable="false">
    <persistenceIntervalInMinutes>15</persistenceIntervalInMinutes>
    <persisterSchedulerPoolSize>10</persisterSchedulerPoolSize>
    <persister class="org.wso2.carbon.event.processor.core.internal.persistence.FileSystemPersistenceStore">
        <property key="persistenceLocation">cep_persistence</property>
    </persister>
</persistence>


  5. Check for any other configurations that were done for DAS 3.1.0 based on your solution and update the configuration files in DAS 3.2.0 accordingly. For example, configurations related to external user stores, caching, mounting, transports etc.

Migrating indexing information

Each node stores its index data in the <DAS_HOME>/repository/data directory. There are three possible approaches to migrate this data. Click on the relevant tab based on the approach you want to follow.

Migrating encrypted data

To migrate encrypted data in WSO2 DAS 3.1.0 when you upgrade to WSO2 3.2.0, follow the steps below:

  1. Download migration resources from here.
  2. Unzip the migration resources you downloaded and copy the org.wso2.das.migration-3.2.0.jar to the <DAS-3.2.0_HOME>/repository/components/dropins directory.
  3. Copy the .jks files from the <DAS-3.1.0_HOME>/repository/resources/security directory and place them in the <DAS-3.2.0_HOME>/repository/resources/security directory.
  4. Copy the .db files from the <DAS-3.1.0_HOME>/repository/database directory and place them in the <DAS-3.2.0_HOME>/repository/database directory.
  5. If you have created tenants in the WSO2 DAS 3.1.0 environment and if there are any tenant resources in the <DAS-3.1.0_HOME>/repository/tenants directory, copy that content to the <DAS-3.2.0_HOME>/repository/tenants directory.
  6. If you have created any secondary user stores in the WSO2 DAS 3.1.0 environment, copy them from the <DAS-3.1.0_HOME>/repository/deployment/server/userstores directory and place them in the <DAS-3.2.0_HOME>/repository/deployment/server/userstores directory.
  7. If you have created any event receivers and event publishers in the WSO2 DAS 3.1.0 environment, do the following:
    • To migrate the event receiver configurations, copy the contents in the <DAS-3.1.0_HOME>/repository/deployment/server/eventreceivers directory to the <DAS-3.2.0_HOME>/repository/deployment/server/eventreceivers directory.
    • To migrate the event publisher configurations, copy the contents in the <DAS-3.1.0_HOME>/repository/deployment/server/eventpublishers directory to the <DAS-3.2.0_HOME>/repository/deployment/server/eventpublishers directory.
  8. Start WSO2 DAS 3.2.0 with the following commend to perform data migration for encrypted data.
    • On Windows:  wso2server.bat -Dmigrate

    • On Linux/Mac OS:  sh wso2server.sh -Dmigrate

  9. Once the migration is successfully completed, stop the server and start it again with one of the following commands.
    • On Windows:  wso2server.bat

    • On Linux/Mac OS:  sh wso2server.sh

Migrating artifacts

All artifacts can be migrated from DAS 3.1.0 to DAS 3.2.0 via Composite Application Archive (CAR) files. For detailed instructions package artifacts as C-App archives, see Packaging Artifacts as C-App Archive.

You should manually deploy Composite Application Archive (CAR) files that you have in DAS 3.1.0 to DAS 3.2.0.

To migrate deployment artifacts:

  • Copy the <DAS_HOME>/repository/deployment/server directory from DAS 3.1.0 to DAS 3.2.0.

  • If multi-tenancy is used, copy the <DAS_HOME>/repository/tenants directory from DAS 3.1.0 to DAS 3.2.0.

    You may have already copied the tenants directory when migrating encrypted data.

Testing the upgrade

Verify that all the required scenarios are working as expected. This confirms that the upgrade is successful.


  • No labels
Unknown macro: {next_previous_links2}