Configuring Transport Level Security

The transport level security protocol of the Tomcat server is configured in the <PRODUCT_HOME>/conf/tomcat/catalina-server.xml file. Note that the ssLprotocol attribute is set to "TLS" by default. 
See the following topics for detailed configuration options:

Disable SSL version 3

Follow the steps given below to disable SSL 3.0 support on WSO2 Carbon 4.3.0 based servers.

1. Open the <PRODUCT_HOME>/repository/conf/tomcat/catalina-server.xml file. 
2. Make a backup of the catalina-server.xml file and stop the Carbon server.
3. Find the Connector configuration corresponding to TLS (usually, this connector has the port set to 9443 and the sslProtocol as TLS).

   • If you are using JDK 1.6, remove the sslProtocol="TLS" attribute from the configuration and replace it with sslEnabledProtocols="TLSv1" as shown below.

     <Connector protocol="org.apache.coyote.http11.Http11NioProtocol"
                     port="9443"
                     bindOnInit="false"
                     sslEnabledProtocols="TLSv1"

   •  If you are using JDK 1.7, remove the sslProtocol="TLS" attribute from the above configuration and replace it with sslEnabledProtocols="TLSv1,TLSv1.1,TLSv1.2" as shown below.

     <Connector protocol="org.apache.coyote.http11.Http11NioProtocol"
                     port="9443"
                     bindOnInit="false"
                     sslEnabledProtocols="TLSv1,TLSv1.1,TLSv1.2" 

4. Start the server.

   In some Carbon products, such as WSO2 ESB and WSO2 API Manager, pass-thru transports are enabled. Therefore, to disable SSL version 3 in such products, the axis2.xml file stored in the <PRODUCT_HOME>/repository/conf/axis2/ directory should also be configured.

To test if SSL version 3 is disabled:

1. Download TestSSLServer.jar from here.

2. Execute the following command to test the transport:

   java -jar TestSSLServer.jar localhost 9443 

3. The output of the command before and after disabling SSL version 3 is shown below.
   Before SSL version 3 is disabled:

   Supported versions: SSLv3 TLSv1.0
   Deflate compression: no
   Supported cipher suites (ORDER IS NOT SIGNIFICANT):
     SSLv3
        RSA_EXPORT_WITH_RC4_40_MD5
        RSA_WITH_RC4_128_MD5
        RSA_WITH_RC4_128_SHA
        RSA_EXPORT_WITH_DES40_CBC_SHA
        RSA_WITH_DES_CBC_SHA
        RSA_WITH_3DES_EDE_CBC_SHA
        DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
        DHE_RSA_WITH_DES_CBC_SHA
        DHE_RSA_WITH_3DES_EDE_CBC_SHA
        RSA_WITH_AES_128_CBC_SHA
        DHE_RSA_WITH_AES_128_CBC_SHA
        RSA_WITH_AES_256_CBC_SHA
        DHE_RSA_WITH_AES_256_CBC_SHA
     (TLSv1.0: idem)

   After SSL version 3 is disabled:

   Supported versions: TLSv1.0
   Deflate compression: no
   Supported cipher suites (ORDER IS NOT SIGNIFICANT):
     TLSv1.0
        RSA_EXPORT_WITH_RC4_40_MD5
        RSA_WITH_RC4_128_MD5
        RSA_WITH_RC4_128_SHA
        RSA_EXPORT_WITH_DES40_CBC_SHA
        RSA_WITH_DES_CBC_SHA
        RSA_WITH_3DES_EDE_CBC_SHA
        DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
        DHE_RSA_WITH_DES_CBC_SHA
        DHE_RSA_WITH_3DES_EDE_CBC_SHA
        RSA_WITH_AES_128_CBC_SHA
        DHE_RSA_WITH_AES_128_CBC_SHA
        RSA_WITH_AES_256_CBC_SHA
        DHE_RSA_WITH_AES_256_CBC_SHA

Disable weak ciphers

A cipher is an algorithm for performing encryption or decryption. When you set the sslprotocol of your server to TLS, the TLS and the default ciphers get enabled without considering the strength of the ciphers. This is a security risk as weak ciphers, also known as EXPORT ciphers, can make your system vulnerable to attacks such as the Logjam attack on Diffie-Hellman key exchange. The Logjam attack is also called the Man-in-the-Middle attack. It downgrades your connection's encryption to a less-secured level (e.g., 512 bit) that can be decrypted with sufficient processing power.

To prevent these types of security attacks, it is encouraged to disable the weak ciphers. You can enable only the ciphers that you want the server to support in a comma-separated list in the ciphers  attribute. Also, if you do not add this cipher attribute or keep it blank, the browser will support all the SSL ciphers by JSSE. This will enable the weak ciphers.

1. Open the <PRODUCT_HOME>/repository/conf/tomcat/catalina-server.xml file.
2. Make a backup of the catalina-server.xml  file and stop the WSO2 product server.

3. Add the cipher  attribute to the existing configuration in the catalina-server.xml  file by adding the list of ciphers that you want your server to support as follows: ciphers="<cipher-name>,<cipher-name>". For example,
   

   For Tomcat version 7.0.34:
   ciphers="SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_DHE_RSA_WITH_DES_CBC_SHA,
            SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,
            SSL_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA"
    
   For Tomcat version 7.0.59:
   ciphers="SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_DHE_RSA_WITH_DES_CBC_SHA,
            SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
            TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA"  
    
   For Tomcat version 7.0.34 and JDK 8:
   ciphers="SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_DES_CBC_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA"
   
   For Tomcat version 7.0.59 and JDK 8:
   ciphers="SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA" 

4. Start the server.

5. To verify that the configurations are all set correctly, download and run the TestSSLServer.jar.
   

   $ java -jar TestSSLServer.jar localhost 9443

6. Note that in the output that you get, the section "Supported cipher suites" does not contain any export ciphers.

Firefox 39.0 onwards does not allow to access Web sites that support DHE with keys less than 1023 bits (not just DHE_EXPORT). 768/1024 bits are considered to be too small and vulnerable to attacks if the hacker has enough computing resources.