The content in this documentation is for older versions of WSO2 products. For updated information on Enterprise Integration Patterns, go to the latest Micro Integrator documentation. "> The content in this documentation is for older versions of WSO2 products. For updated information on Enterprise Integration Patterns, go to the latest Micro Integrator documentation.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

This section explains, through an example scenario, how the Message Broker EIP can be implemented using WSO2 ESB. The following topics are covered:

Introduction to Message Broker

The Message Broker EIP decouples the destination of a message from the sender and maintains central control over the flow of messages. It receives messages from multiple destinations, determines the correct destination, and routes the message to the correct channel. The Message Broker EIP decouples messages from senders and receivers. For more information, refer to http://www.eaipatterns.com/MessageBroker.html.

Figure 1: Message Broker EIP

Example scenario

This example scenario demonstrates how WSO2 ESB works with WSO2 Message Broker to implement the Message Broker EIP. In this scenario, sent messages are put into a Message Broker queue, which any interested receiver can consume. If you want to add more receivers, you can use topics in WSO2 Message Broker in a similar manner discussed here.

Environment setup

Setting up WSO2 Message Broker
  1. Download a binary version of WSO2 Message Broker from http://wso2.com/products/message-broker, and extract the distribution, which will be referred to as <MB_HOME>.

  2. Open <MB_HOME>/repository/conf/carbon.xml file, and change the offset of ports to 1. This is done to ensure that there will be no port conflicts when you run multiple WSO2 products simultaneously on the same server.

    <Ports>
<Offset>1</Offset>
...

  3. Change the default virtual host to carbon in <MB_HOME>/repository/conf/advanced/qpid-virtualhosts.xml file.

    <virtualhosts>
    <default>carbon</default>
...
  4. Start WSO2 MB server by executing wso2server.sh (or wso2server.bat in Windows) file in the <MB_HOME>/bin directory.
Setting up WSO2 ESB
  1. Download and install WSO2 ESB from http://wso2.com/products/enterprise-service-bus. Installation home will be referred to as <ESB_HOME>. For a list of prerequisites and step-by-step installation instructions, refer to Getting Started in the WSO2 ESB documentation.
  2. Copy the following files from <MB_HOME>/client-lib to <ESB_HOME>/repository/components/lib.
    • geronimo-jms_1.1_spec-1.1.0.wso2v1.jar
    • andes-client-0.13.wso2v8.1.jar

  3. Enable the JMS transport receivers and senders by uncommenting the relevant sections in the <ESB_HOME>/repository/conf/axis2/axis2.xml file. For example:

    <!--transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
        <parameter name="myTopicConnectionFactory" locked="false">
           <parameter name="java.naming.factory.initial" locked="false">org.wso2.andes.jndi.PropertiesFileInitialContextFactory</parameter>
            <parameter name="java.naming.provider.url" locked="false">repository/conf/jndi.properties</parameter>
            <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
            <parameter name="transport.jms.ConnectionFactoryType" locked="false">topic</parameter>
        </parameter>
        <parameter name="myQueueConnectionFactory" locked="false">
            <parameter name="java.naming.factory.initial" locked="false">org.wso2.andes.jndi.PropertiesFileInitialContextFactory</parameter>
            <parameter name="java.naming.provider.url" locked="false">repository/conf/jndi.properties</parameter>
            <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
           <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
        </parameter>
        <parameter name="default" locked="false">
            <parameter name="java.naming.factory.initial" locked="false">org.wso2.andes.jndi.PropertiesFileInitialContextFactory</parameter>
            <parameter name="java.naming.provider.url" locked="false">repository/conf/jndi.properties</parameter>
            <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
            <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
        </parameter>
</transportReceiver-->
.........


<transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/>

  4. Define the following properties in the <ESB_HOME>/repository/conf/jndi.properties file.

    .....
#Need change QueueConnection factory as follows
connectionfactory.QueueConnectionFactory = amqp://admin:admin@clientID/carbon?brokerlist='tcp://localhost:5673'

# register some queues in JNDI using the form
# queue.[jndiName] = [physicalName]
queue.myqueue=myqueue

# register some topics in JNDI using the form - Commented since this sample is not going to use Topics
# topic.[jndiName] = [physicalName]
#topic.MyTopic = example.MyTopic
  5. Start the sample Axis2 server on ports 9001 and 9002. For instructions, refer to the section ESB Samples Setup - Starting Sample Back-End Services in the WSO2 ESB documentation.

ESB configuration

Start the ESB server and log into its management console UI (https://localhost:9443/carbon). In the management console, navigate to Main Menu, click Service Bus and then Source View. Next, copy and paste the following configuration, which helps you explore the example scenario, to the source view.  

<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns="http://ws.apache.org/ns/synapse">
   <proxy name="StockQuoteProxy"
          transports="http"
          startOnLoad="true"
          trace="disable">
      <description/>
      <target>
			<!-- Send message to WSO2 MB -->
         <endpoint>
            <address uri="jms:/myqueue?transport.jms.ConnectionFactoryJNDIName=QueueConnectionFactory&amp;java.naming.factory.initial=org.wso2.andes.jndi.PropertiesFileInitialContextFactory&amp;java.naming.provider.url=repository/conf/jndi.properties&amp;transport.jms.DestinationType=queue"/>
         </endpoint>
         <inSequence>
            <property name="OUT_ONLY" value="true"/>
            <property name="FORCE_SC_ACCEPTED" value="true" scope="axis2"/>
            <property name="transport.jms.ContentTypeProperty"
                      value="Content-Type"
                      scope="axis2"/>
         </inSequence>
         <outSequence>
            <property name="TRANSPORT_HEADERS" scope="axis2" action="remove"/>
            <send/>
         </outSequence>
      </target>
   </proxy>
   <sequence name="fault">
      <log level="full">
         <property name="MESSAGE" value="Executing default &#34;fault&#34; sequence"/>
         <property name="ERROR_CODE" expression="get-property('ERROR_CODE')"/>
         <property name="ERROR_MESSAGE" expression="get-property('ERROR_MESSAGE')"/>
      </log>
      <drop/>
   </sequence>
   <sequence name="main">
      <log/>
      <drop/>
   </sequence>
</definitions>

Simulating the sample scenario

Send a request using Stock Quote client to the proxy service in the following manner. For information on the Stock Quote client, refer to the Sample Clients section in WSO2 ESB documentation. 

ant stockquote -Dtrpurl=http://localhost:8280/services/StockQuoteProxy -Dsymbol=WSO2

Note that the request is stored in WSO2 Message Broker. Any consumer can access the stored message by accessing destinationMyQueue in WSO2 Message Broker.

How the implementation works

Let's investigate the elements of the ESB configuration in detail. The line numbers below are mapped with the ESB configuration shown above.

  • Proxy service [line 3 in ESB config] - Defines a proxy service named StockQuoteProxy.
  • endoint [line 10 in ESB config] - Defines an endpoint inside the proxy service. The address of the endpoint is a JMS URL. The JMS URL is made up of the following elements:
  • jms:/myqueue - Looks for a JNDI entry myqueue (see JNDI properties above).
  • ? - Separator indicating extra attributes.
  • transport.jms.ConnectionFactoryJNDIName=QueueConnectionFactory - Looks up ConnectionFactory in JNDI with name QueueConnectionFactory.
  • &amp;  - Separator (this will convert to ‘&’)
  • java.naming.factory.initial=org.wso2.andes.jndi.PropertiesFileInitialContextFactory - Uses the andes properties-based JNDI.
  • &amp;  - Another separator (this will convert to ‘&’)
  • java.naming.provider.url=repository/conf/jndi.properties - Looks in repository/conf/jndi.properties for the JNDI properties file.
  • No labels