Follow the instructions below to create an XACML policy.
- Sign in. Enter your user name and password to log on to the Management Console.
- Navigate to the Main menu to access the Entitlement menu. Click Policy Administration under PAP.
- Click Add New Entitlement Policy.
The Add New Policy page appears. In current WSO2 Identity Server, there is 6 ways of wiring an XACML 3.0 policy. You can select one out of six methods to create the policy.
Simple Policy Editor
- This simple editor provides you the opportunity to create XACML 3.0 policies without any knowledge of XACML policy language. You can define your rules in a simpler manner and create an XACML 3.0 policy out of them. However, you need to have some knowledge about access control rules.
This editor is based on four categories which we are mostly talking about access control rules. i.e User, Resource, Action, and Environment where Resource is entity that we are trying to protect with access control rules, User is the person who is going to access the resource, Action is, what user is going to perform on Resource and Environment is the time, domain or any other factors that could cause to control the user’s access.
In the Simple Editor, you can see the following,
Entitlement Policy Name: Name of the policy.
Entitlement Policy Description: A description of the policy.
This policy is based on: Define based on what entity, that you are going to write this policy.
Note
If you are writing policy based on web service. You can select “Resource” category and continue. Or less, if you are writing policy based on email domain of users. You can select “Subject” category and select the “Email” attribute Id and then define the email.
You can define multiple permit rules: As an example, “Only users in admin role can do GET” This rule can be defined as follows. You need to select “Role” attribute id for “User” and fill the text box with the role name (admin) and then fill the text box of near “Action” with action name (GET)
Deny rule is automatically created as the final rule. Permitted rules are evaluated from top to blow.
Important
- If you want to define value as java regexp expression, you need to embedded value in the curly brackets “{ }”
Ex : { ^([a-zA-Z0-9_.-])+@wso2.com }
- If you want to define multiple values as OR or AND value sets. you can separate those multiple values with “|” or “&”separates
Ex :read | write | delete
Ex : ReadRole & WriteRole
- If you want to define value as a greater or lesser than value. you can use “<” or “>” ( We do not support ">=" or "<=")
Ex : < 34
- If you want to define two values that are in a range, you can use square brackets “[ ]” and round brackets “( )” . And two values are coma “, “ separated.
Ex: [09:00:00+05:00, 16:00:00+05:00] time between 09.00am and 04.00 pm
Ex: (18, 30]greater than 18 and less than or equal to 30
A sample policy example :
- Policy is defined for accessing “foo” resource
following are the access control rules that policy needs to be satisfied
- Resources under “foo” collection can be read, written, edited and deleted by the users in the admin role.
- Resources under “foo/wso2″ collection can be read by only the users in the WSO2 (whose email address is wso2.com domain) regex for email (^([a-zA-Z0-9_.-])+@wso2.com)between 9.00am and 4.00pm (09:00:00+05:00, 16:00:00+05:00)
- Allother access requestto “foo” resource must be denied.
Following is the screenshot of simple policy editor with defined rules.
Basic Policy Editor
- This editor is based on four categories which we are mostly talking in access control rules. i.e Subject, Resource, Action and Environment.
- You can define a target and multiple rules in the policy. Rules can be ordered.
- You can plug any attribute value sources and select those attribute values when creating the policy; rather than filling text boxes by your own. By default, WSO2 registry resources, Roles of the underline user store and some pre-defined actions are the attribute value sources for the resource, subject and action attributes respectively. There are extension points that you can use to extend and bring more attribute values on to the policy editor UI.
In the Basic Editor, you can see the following,
Entitlement Policy Name: Name of the policy.
Entitlement Policy Description: A description of the policy.
The policy is going evaluate….: You can define; for what attribute values, this policy is going to be applied (or picked). This is similar to defining the policy target element.
Define Entitlement Rule(s): You can define rules which you want to evaluate.
A sample policy requirement:
- This access control policy is written for the patient records of medi.com hospital. Patient records are stored in a location under “/patient/” directory. Therefore we are defining access control rules for “/patient/” directory.
- Users can only access patient records from 09.00pm to 04.00pm.
- Patient records can be created, deleted by users in MedAdminstrator role.
- Patient records can be updated and read by users in MediStaff role.
- All other access request to patient records must be denied.
Step1: Define a name for the policy.
Step 2: This is similar as defining the policy target element. Configure it such as “policy is applied for resource attribute value /patient//* with reg-ex match”.
Step 3: Define the 1st rule. Rule is “Users can only access patient records from 09.00pm to 04.00pm” . It means that if user tries to access records any other time, user must be denied. Therefore, we are writing a deny rule for users who are not accessing patient records from 09.00pm to 04.00pm . Therefore first, let define a rule name and also define the rule effect as “Deny”. Then Select “Time” from environment. Select functions as “is not” and “greater than and less than”. Write the time with GMT offset value. After defining you can add this rule in to the policy.
Step 4: Define the 2nd rule. Rule name must be given. Then select “Role” as user’s attribute. You can select your “MedAdminstrator” role name from user attribute source. So just click on icon.
Step 5: You can do search for attributes values.
Step 6: Select only the “MediAdminstrator” role from the attribute source.
Step 7: You can see, text box has been filled with the selected “MediAdminstrator” role name. Now let define actions. Here lets make the function name as “at-least-one” . Then this rule would be satisfied even when at least one action is going to perform. Finally, lets add this rule into the policy
Step 8: Let's define the 3rd rule. Which allows “MediStaff” roles to access the resource with action read and edit. You can follow same steps 4, 5, 6, 7. Then finally, add this rule in to the policy.
Step 9: Finally define the rule to deny all other access, as following
Step 10: We have defined the target and four rules. Now it is time to define the rule-combining algorithm. Let select is as “first applicable” Then rule effect of the 1st rule that is evaluated properly, would be the final result of the policy.
You can click on “finish” and finish policy creation.
Standard Policy Editor
- The standard policy editor is little similar to Basic Policy Editor. But it is basically designed for creating XACML 3.0 policy rules. Because there are several improvements with Obligation in XACML 3.0 when compare to 2.0. In XACML 2.0, obligations can only be added to policies and policy sets. But with XACML 3.0, rules can also contain Obligations. Therefore, if you want to get details of the obligations after the policy evaluated, It is good to use Standard Policy Editor.
- Advice is a newly introduced feature with XACML 3.0 which is similar to Obligations. But only different, when compared to Obligations, PEPs do not have to comply with advice statements. PEPs can consider or discard the statement. Common use case is to explain why something was denied. “User bob is denied Because he has not a valid email”
- Here the attribute "Define Policy Obligation or Advice" is not mandatory.
You can define a policy obligation or advice as follows:
Note
There are several policies Combining Algorithms that we support in WSO2 Identity Server XACML Advanced Policy Editor.
- Deny Overrides:
This combining algorithm combines decisions in such a way that if any decision is a Deny, then that decision wins.
Deny overrides is one of the safest combining algorithms since it favors a Deny decision. However, if none of the children return a Deny decision, then the combining algorithm will never produce a Deny. - Permit Overrides:
This combining algorithm combines decisions in such a way that if any decision is a Permit, then that decision wins.
The permit overrides combining algorithm can be interesting when:
At least one child must return a Permit for access to be granted overall regardless of restrictions.
One wants to return all the reasons why access is being denied. This is what one could call a “greedy deny overrides”. Forinstanceif the reason for not being able to view aresourceisthat (a) you are not the owner and (b) you are in the wrong department, then we could rework the previous example as follows. When any of the deny reason triggers, the response wouldbe denywith all the applicable reasons for access being denied:
- Policy Set (deny overrides): role==manager AND action==view AND resourceType==resource
- Policy 1 (permit overrides)
- Rule 1: deny if resourceOwner != userId + Advice(“you are not the owner of the resource”)
- Rule 2: deny if rsourceDepartment != userDepartment+ Advice(“you are not in the same department as the resource)
- Policy 2
- Rule 1: permit
- Policy 1 (permit overrides)
- Policy Set (deny overrides): role==manager AND action==view AND resourceType==resource
- First Applicable:
This combining algorithm combines decisions in such a way that the final decision returned is the first one produced either of Permit or Deny.
First applicable is useful to shortcut policy evaluation. For instance, if a policy set contains a long series of not applicable policies and one applicable policy which returns either of Permit or Deny, then if that policy comes first and does produce Permit or Deny, the PDP will stop there and not process the other siblings.
- Deny Unless Permit | Permit Unless Deny:
In XACML there are 4 possible decisions: Permit, Deny, NotApplicable, and Indeterminate. Sometimes, it is desirable to hide the NotApplicable and Indeterminate decisions to only allow for Permit or Deny. It makes the PEP logic potentially simpler.
- Only One Applicable:
This combining algorithm exists only for policy sets to combine policy sets and policies. It cannot be used to combine rules. With this combining algorithm, in order for either of a Permit or Deny to be returned, then only one of the children must produce a valid decision – whether Deny or Permit.
- Ordered Deny Overrides | Ordered Permit Overrides:
The ordered combining algorithms combine decisions in the same way as their (unordered) cousins. In, addition they bring the guarantee that policies, policy sets, and rules are considered in the order in which they are defined. The need to define an ordered combining algorithm stems from the fact the XACML specification does not specify whether order matters in the deny-overrides and permit-overrides combining algorithms.
Policy Set Editor
When you want to create a set of policies to evaluate at one time, you can create a Policy Set. You can add policies as shown in the figure and Click finish to create the policy set.
Import Existing Policy
You can add a policy by using a policy xml file.
- Write a policy in an xml file and upload it.
Click Choose File and browse to the location of the policy in your local machine.
Write Policy in XML
Create your own policy in XML.
Click Finish/Upload depending on the option you chose to create your policy.
To evaluate the policy you just created and see a sample request and response of it, see Evaluating a XACML Policy.