Setting Up Deployment Pattern 2

This page guides you through setting up deployment pattern 2, which is a HA clustered deployment of WSO2 Identity Server with WSO2 Identity Analytics. For more information about deployment pattern 2 and its high level architecture, see Deployment Patterns - Pattern 2. 

<dbConfig name="sharedregistry">
    <dataSource>jdbc/WSO2IdentityDS</dataSource>
</dbConfig>
<remoteInstance url="https://localhost:9443/registry">
    <id>sharedregistry</id>
    <dbConfig>sharedregistry</dbConfig>
    <readOnly>false</readOnly>
    <registryRoot>/</registryRoot>
    <enableCache>true</enableCache>
    <cacheId>jdbc:mysql://wso2is-pattern1-mysql-service:3306/WSO2_IDENTITY_DB</cacheId>
</remoteInstance>
<mount path="/_system/config" overwrite="true">
    <instanceId>sharedregistry</instanceId>
    <targetPath>/_system/config</targetPath>
</mount>
<mount path="/_system/governance" overwrite="true">
    <instanceId>sharedregistry</instanceId>
    <targetPath>/_system/governance</targetPath>
</mount>

Minimum High Availability Deployment for WSO2 IS Analytics

This section explains how to configure WSO2 Identity Server Analytics in a distributed setup. You can configure alerts to monitor these APIs and detect unusual activity, manage locations via geo location statistics and to carry out detailed analysis of logs relating to the APIs. WSO2 IS Analytics is powered by WSO2 DAS. The following diagram indicates the minimum deployment pattern used for high availability.

WSO2 Identity Server Analytics supports a deployment scenario that has focus on high availability (HA) along with HA processing. To enable HA processing, you should have two WSO2 IS Analytics servers in a cluster.

For this deployment, both nodes should be configured to receive all events. To achieve this, clients can either send all the requests to both the nodes or each request to any one of the two nodes (i.e., using load balancing or failover mechanisms). If clients send all the requests to both nodes, the user has to specify that events are duplicated in the cluster (i.e., the same event comes to all the members of the cluster). Alternatively, if a client sends a request to one node, internally it sends that particular request to the other node as well. This way, even if the clients send requests to only one node, both IS Analytics nodes receive all the requests. 

In this scenario, one IS Analytics node works in active mode and the other works in passive mode. However, both nodes process all the data.

If the active node fails, the other node becomes active and receives all the requests.

When the failed node is up again, it fetches  all the internal states of the current active node via synching.

The newly arrived node then becomes the passive node and starts processing all the incoming messages to keep its state synched with the active node so that it can become active if the current active node fails.

Prerequisites

Before you configure a minimum high availability IS Analytics cluster, the following needs to be carried out.

1. Download the WSO2 IS Analytics distribution. Click DOWNLOAD ANALYTICS in the WSO2 Identity and Access Management page.
2. Take the following steps to install WSO2 IS Analytics. Sicne this procedure is identical to installing WSO2 Data Analytics Server (DAS), these steps take you to the DAS documentation for details.
   1. Ensure that you have met the Installation Prerequisites.
   2. Go to the installation instructions relevant to your operating system:
      
      • Installing on Linux
      • Installing on Windows
      • Installing as a Windows Service
      • Installing as a Linux Service
3. Follow the steps below to set up MySQL.

   1. Download and install MySQL Server.

   2. Download the MySQL JDBC driver.

   3. Unzip the downloaded MySQL driver zipped archive, and copy the MySQL JDBC driver JAR (mysql-connector-java-x.x.xx-bin.jar) into the <IS Analytics_HOME>/repository/components/lib directory of all the nodes in the cluster.

   4. Enter the following command in a terminal/command window, where username is the username you want to use to access the databases.
      mysql -u username -p 
   5. When prompted, specify the password that will be used to access the databases with the username you specified.

   6. Create two databases named userdb and regdb.

      About using MySQL in different operating systems

      For users of Microsoft Windows, when creating the database in MySQL, it is important to specify the character set as latin1. Failure to do this may result in an error (error code: 1709) when starting your cluster. This error occurs in certain versions of MySQL (5.6.x) and is related to the UTF-8 encoding. MySQL originally used the latin1 character set by default, which stored characters in a 2-byte sequence. However, in recent versions, MySQL defaults to UTF-8 to be friendlier to international users. Hence, you must use latin1 as the character set as indicated below in the database creation commands to avoid this problem. Note that this may result in issues with non-latin characters (like Hebrew, Japanese, etc.). The following is how your database creation command should look.

      mysql> create database <DATABASE_NAME> character set latin1;

      For users of other operating systems, the standard database creation commands will suffice. For these operating systems, the following is how your database creation command should look.

      mysql> create database <DATABASE_NAME>;

   7. Execute the following script for the two databases you created in the previous step.
      mysql> source <IS Analytics_HOME>/dbscripts/mysql.sql; 


      From WSO2 Carbon Kernel 4.4.6 onwards there are two MySQL DB scripts available in the product distribution. Click here to identify as to which version of the MySQL script to use.

       Click here to view the commands for performing steps f and g

      mysql> create database userdb;
      mysql> use userdb;
      mysql> source <IS Analytics_HOME>/dbscripts/mysql.sql;
      mysql> grant all on userdb.* TO username@localhost identified by "password";
       
       
      mysql> create database regdb;
      mysql> use regdb;
      mysql> source <IS Analytics_HOME>/dbscripts/mysql.sql;
      mysql> grant all on regdb.* TO username@localhost identified by "password";

   8. Configure the datasource in the <IS Analytics_HOME>/repository/conf/analytics/analytics-conf.xml file as shown in the code extract below. As it is possible to maintain the data in one database, you can point all three datasources to a single database.
      
      Alternatively, if you want to separate the data logically, create the following two databases in MySQL and point to the respective database as shown in the extract below. 

      • WSO2_ANALYTICS_EVENT_STORE_DB

      • WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB

      <analytics-record-store name="EVENT_STORE">
         <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
         <properties>
            <property name="datasource">WSO2_ANALYTICS_EVENT_STORE_DB</property>
            <property name="category">read_write_optimized</property>
         </properties>
      </analytics-record-store>
      <analytics-record-store name="EVENT_STORE_WO">
         <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
         <properties>
            <property name="datasource">WSO2_ANALYTICS_EVENT_STORE_DB</property>
            <property name="category">write_optimized</property>
         </properties>
      </analytics-record-store>
      <analytics-record-store name="PROCESSED_DATA_STORE">
         <implementation>org.wso2.carbon.analytics.datasource.rdbms.RDBMSAnalyticsRecordStore</implementation>
         <properties>
            <property name="datasource">WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</property>
            <property name="category">read_write_optimized</property>
         </properties>
      </analytics-record-store>

Required configurations

When configuring the minimum high availability cluster following setups should be done for both nodes.

1. Do the following database-related configurations.

   1. Follow the steps below to configure the <IS Analytics_HOME>/repository/conf/datasources/master-datasources.xml file as required. 

      Note that you can point all these datasources to a single database as it is not technically neccessary to separate the data into different databases. However, if required, you can have separate databases as well.
      
      The steps given below demonstrate the flow assuming you have created separate databases for each. If you are using a single database instead, simply point the datasources indicated below to a single database.

      1. Enable all the nodes to access the users database by configuring a datasource to be used by user manager as shown below. 

         <datasource>
         	<name>WSO2UM_DB</name>
         	<description>The datasource used by user manager</description>
         	<jndiConfig>
           	<name>jdbc/WSO2UM_DB</name>
         	</jndiConfig>
         	<definition type="RDBMS">
           	<configuration>
             	<url>jdbc:mysql://[MySQL DB url]:[port]/userdb</url>
             	<username>[user]</username>
             	<password>[password]</password>
             	<driverClassName>com.mysql.jdbc.Driver</driverClassName>
             	<maxActive>50</maxActive>
             	<maxWait>60000</maxWait>
             	<testOnBorrow>true</testOnBorrow>
             	<validationQuery>SELECT 1</validationQuery>
             	<validationInterval>30000</validationInterval>
           	</configuration>
         	</definition>
         </datasource>

      2. Enable the nodes to access the registry database by configuring the WSO2REG_DB data source as follows.

         <datasource>
         	<name>WSO2REG_DB</name>
         	<description>The datasource used by the registry</description>
         	<jndiConfig>
           	<name>jdbc/WSO2REG_DB</name>
         	</jndiConfig>
         	<definition type="RDBMS">
           	<configuration>
             	<url>jdbc:mysql://[MySQL DB url]:[port]/regdb</url>
             	<username>[user]</username>
             	<password>[password]</password>
             	<driverClassName>com.mysql.jdbc.Driver</driverClassName>
             	<maxActive>50</maxActive>
             	<maxWait>60000</maxWait>
             	<testOnBorrow>true</testOnBorrow>
             	<validationQuery>SELECT 1</validationQuery>
             	<validationInterval>30000</validationInterval>
           	</configuration>
         	</definition>
         </datasource>

         For detailed information about registry sharing strategies, see the library article Sharing Registry Space across Multiple Product Instances.

   2. Point to your database WSO2_ANALYTICS_EVENT_STORE_DB and WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB in the <IS Analytics_HOME>/repository/conf/datasources/analytics-datasources.xml file as shown below.

      <datasources-configuration>
          <providers>
              <provider>org.wso2.carbon.ndatasource.rdbms.RDBMSDataSourceReader</provider>
          </providers>
      
          <datasources>
              <datasource>
                  <name>WSO2_ANALYTICS_EVENT_STORE_DB</name>
                  <description>The datasource used for analytics record store</description>
                  <definition type="RDBMS">
                      <configuration>
                          <url>jdbc:mysql://[MySQL DB url]:[port]/WSO2_ANALYTICS_EVENT_STORE_DB</url>
                          <username>[username]</username>
                          <password>[password]</password>
                          <driverClassName>com.mysql.jdbc.Driver</driverClassName>
                          <maxActive>50</maxActive>
                          <maxWait>60000</maxWait>
                          <testOnBorrow>true</testOnBorrow>
                          <validationQuery>SELECT 1</validationQuery>
                          <validationInterval>30000</validationInterval>
                          <defaultAutoCommit>false</defaultAutoCommit>
                      </configuration>
                  </definition>
              </datasource>
              <datasource>
                  <name>WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</name>
                  <description>The datasource used for analytics record store</description>
                  <definition type="RDBMS">
                      <configuration>
                          <url>jdbc:mysql://[MySQL DB url]:[port]/WSO2_ANALYTICS_PROCESSED_DATA_STORE_DB</url>
                          <username>[username]</username>
                          <password>[password]</password>
                          <driverClassName>com.mysql.jdbc.Driver</driverClassName>
                          <maxActive>50</maxActive>
                          <maxWait>60000</maxWait>
                          <testOnBorrow>true</testOnBorrow>
                          <validationQuery>SELECT 1</validationQuery>
                          <validationInterval>30000</validationInterval>
                          <defaultAutoCommit>false</defaultAutoCommit>
                      </configuration>
                  </definition>
              </datasource>
          </datasources>
      </datasources-configuration>

      For more information, see Datasources in DAS documentation.

   3. To share the user store among the nodes, open the <IS Analytics_HOME>/repository/conf/user-mgt.xmlfile and modify the dataSource property of the <configuration> element as follows.

      <configuration> 
      ...
          <Property name="dataSource">jdbc/WSO2UM_DB</Property>
      </configuration>

      The datasource name specified in this configuration should be the same as the datasource used by user manager that you configured in sub step a, i.

   4. In the <IS Analytics_HOME>/repository/conf/registry.xml file, add or modify the dataSource attribute of the <dbConfig name="govregistry"> element as follows.

      <dbConfig name="govregistry">
      	<dataSource>jdbc/WSO2REG_DB</dataSource>
      </dbConfig>
      <remoteInstance url="https://localhost:9443/registry"> 
      	<id>gov</id>
      	<cacheId>user@jdbc:mysql://localhost:3306/regdb</cacheId>
      	<dbConfig>govregistry</dbConfig>
      	<readOnly>false</readOnly>
      	<enableCache>true</enableCache>
      	<registryRoot>/</registryRoot>
      </remoteInstance>
      <mount path="/_system/governance" overwrite="true">
      	<instanceId>gov</instanceId>
      	<targetPath>/_system/governance</targetPath>
      </mount>
      <mount path="/_system/config" overwrite="true">
      	<instanceId>gov</instanceId>
      	<targetPath>/_system/config</targetPath>
      </mount>

      Do not replace the following configuration when adding in the mounting configurations. The registry mounting configurations mentioned in the above steps should be added in addition to the following.

      <dbConfig name="wso2registry">
          <dataSource>jdbc/WSO2CarbonDB</dataSource>
      </dbConfig>

2. Update the <IS Analytics_HOME>/repository/conf/axis2/axis2.xml file as follows to enable Hazlecast clustering for both nodes. 
   

   1. Set clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent" to true as shown below to enable Hazlecast clustering.

      <clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent" enable="true">

   2. Enable wka mode on both nodes as shown below.  For more information on wka mode, read About membership schemes.

      <parameter name="membershipScheme">wka</parameter>

   3. Add both the nodes as well known members in the cluster under the members tag in each node as shown in the example below.

      <members>
          <member>
              <hostName>[node1 IP]</hostName>
              <port>[node1 port]</port>
          </member>
          <member>
              <hostName>[node2 IP]</hostName>
              <port>[node2 port]</port>
          </member>
      </members>

   4. For each node, enter the respective server IP address as the value for the localMemberHost property as shown below.

      <parameter name="localMemberHost">[Server_IP_Address]</parameter>

    Click here to view the complete clustering section of the axis2.xml file. with the changes mentioned above.

       <clustering class="org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent"
                   enable="true">
   
           <!--
              This parameter indicates whether the cluster has to be automatically initalized
              when the AxisConfiguration is built. If set to "true" the initialization will not be
              done at that stage, and some other party will have to explictly initialize the cluster.
           -->
           <parameter name="AvoidInitiation">true</parameter>
   
           <!--
              The membership scheme used in this setup. The only values supported at the moment are
              "multicast" and "wka"
   
              1. multicast - membership is automatically discovered using multicasting
              2. wka - Well-Known Address based multicasting. Membership is discovered with the help
                       of one or more nodes running at a Well-Known Address. New members joining a
                       cluster will first connect to a well-known node, register with the well-known node
                       and get the membership list from it. When new members join, one of the well-known
                       nodes will notify the others in the group. When a member leaves the cluster or
                       is deemed to have left the cluster, it will be detected by the Group Membership
                       Service (GMS) using a TCP ping mechanism.
           -->
           
           <parameter name="membershipScheme">wka</parameter>
   
           <!--<parameter name="licenseKey">xxx</parameter>-->
           <!--<parameter name="mgtCenterURL">http://localhost:8081/mancenter/</parameter>-->
   
           <!--
            The clustering domain/group. Nodes in the same group will belong to the same multicast
            domain. There will not be interference between nodes in different groups.
           -->
           <parameter name="domain">wso2.carbon.domain</parameter>
   
           <!-- The multicast address to be used -->
           <!--<parameter name="mcastAddress">228.0.0.4</parameter>-->
   
           <!-- The multicast port to be used -->
           <parameter name="mcastPort">45564</parameter>
   
           <parameter name="mcastTTL">100</parameter>
   
           <parameter name="mcastTimeout">60</parameter>
   
           <!--
              The IP address of the network interface to which the multicasting has to be bound to.
              Multicasting would be done using this interface.
           -->
           <!--
               <parameter name="mcastBindAddress">10.100.5.109</parameter>
           -->
           <!-- The host name or IP address of this member -->
   
           <parameter name="localMemberHost">[node IP]</parameter>
   
           <!--
               The bind adress of this member. The difference between localMemberHost & localMemberBindAddress
               is that localMemberHost is the one that is advertised by this member, while localMemberBindAddress
               is the address to which this member is bound to.
           -->
           <!--
           <parameter name="localMemberBindAddress">[node IP]</parameter>
           -->
   
           <!--
           The TCP port used by this member. This is the port through which other nodes will
           contact this member
            -->
           <parameter name="localMemberPort">[node port]</parameter>
   
           <!--
               The bind port of this member. The difference between localMemberPort & localMemberBindPort
               is that localMemberPort is the one that is advertised by this member, while localMemberBindPort
               is the port to which this member is bound to.
           -->
           <!--
           <parameter name="localMemberBindPort">4001</parameter>
           -->
   
           <!--
           Properties specific to this member
           -->
           <parameter name="properties">
               <property name="backendServerURL" value="https://${hostName}:${httpsPort}/services/"/>
               <property name="mgtConsoleURL" value="https://${hostName}:${httpsPort}/"/>
               <property name="subDomain" value="worker"/>
           </parameter>
   
           <!--
           Uncomment the following section to load custom Hazelcast data serializers.
           -->
           <!--
           <parameter name="hazelcastSerializers">
               <serializer typeClass="java.util.TreeSet">org.wso2.carbon.hazelcast.serializer.TreeSetSerializer
               </serializer>
               <serializer typeClass="java.util.Map">org.wso2.carbon.hazelcast.serializer.MapSerializer</serializer>
           </parameter>
           -->
   
           <!--
              The list of static or well-known members. These entries will only be valid if the
              "membershipScheme" above is set to "wka"
           -->
           <members>
               <member>
                   <hostName>[node1 IP]</hostName>
                   <port>[node1 port]</port>
               </member>
               <member>
                   <hostName>[node2 IP]</hostName>
                   <port>[node2 port]</port>
               </member>
           </members>
   
           <!--
           Enable the groupManagement entry if you need to run this node as a cluster manager.
           Multiple application domains with different GroupManagementAgent implementations
           can be defined in this section.
           -->
           <groupManagement enable="false">
               <applicationDomain name="wso2.as.domain"
                                  description="AS group"
                                  agent="org.wso2.carbon.core.clustering.hazelcast.HazelcastGroupManagementAgent"
                                  subDomain="worker"
                                  port="2222"/>
           </groupManagement>
       </clustering>

3. Configure the  <IS Analytics_HOME>/repository/conf/event-processor.xml file as follows to cluster IS Analytics in the Receiver.

   1. Enable the HA mode by setting the following property.

      <mode name="HA" enable="true">

   2. Disable the Distributed mode by setting the following property.

      <mode name="Distributed" enable="false">

   3. For each node, enter the respective server IP address under the HA mode Config section as shown in the example below.

      When you enable the HA mode for WSO2 IS Analytics, the following are enabled by default:

      • State persistence: If there is no real time use case that requires any state information after starting the cluster, you should disable event persistence by setting the persistence attribute to false in the <IS Analytics_HOME>/repository/conf/event-processor.xml file as shown below.

        <persistence enable="false">
            <persistenceIntervalInMinutes>15</persistenceIntervalInMinutes>
            <persisterSchedulerPoolSize>10</persisterSchedulerPoolSize>
            <persister class="org.wso2.carbon.event.processor.core.internal.persistence.FileSystemPersistenceStore">
                <property key="persistenceLocation">cep_persistence</property>
            </persister>
        </persistence>

        When state persistence is enabled for WSO2 IS Analytics, the internal state of IS Analytics is persisted in files. These files are not automatically deleted. Therefore, if you want to save space in your IS Analytics pack, you need to delete them manually.

        These files are created in the <IS Analytics_HOME>/cep_persistence/<tenant-id> directory. This directory has a separate sub-directory for each execution plan. Each execution plan can have multiple files. The format of each file name is <TIMESTAMP>_<EXECUTION_PLAN_NAME> (e.g, 1493101044948_MyExecutionPlan). If you want to clear files for a specific execution plan, you need to leave the two files with the latest timestamps and delete the rest.

      • Event synchronization: However, if you set the event.duplicated.in.cluster=true property for an event receiver configured in a node, IS Analytics does not perform event synchronization for that receiver.

          <!-- HA Mode Config -->
          <mode name="HA" enable="true">
             ...
              <eventSync>
                  <hostName>[Server_IP_Address]</hostName>

    Click here to view the complete event-processor.xml file with the changes mentioned above.

   <eventProcessorConfiguration>
       <mode name="SingleNode" enable="false">
           <persistence enable="false">
               <persistenceIntervalInMinutes>15</persistenceIntervalInMinutes>
               <persisterSchedulerPoolSize>10</persisterSchedulerPoolSize>
               <persister class="org.wso2.carbon.event.processor.core.internal.persistence.FileSystemPersistenceStore">
                   <property key="persistenceLocation">cep_persistence</property>
               </persister>
           </persistence>
       </mode>
   
       <!-- HA Mode Config -->
       <mode name="HA" enable="true">
           <nodeType>
               <worker enable="true"/>
               <presenter enable="false"/>
           </nodeType>
           <checkMemberUpdateInterval>10000</checkMemberUpdateInterval>
           <eventSync>
               <hostName>172.18.1.217</hostName>
               <port>11224</port>
               <reconnectionInterval>20000</reconnectionInterval>
               <serverThreads>20000</serverThreads>
               <!--Size of TCP event publishing client's send buffer in bytes-->
               <publisherTcpSendBufferSize>5242880</publisherTcpSendBufferSize>
               <!--Character encoding of TCP event publishing client-->
               <publisherCharSet>UTF-8</publisherCharSet>
               <publisherBufferSize>1024</publisherBufferSize>
               <publisherConnectionStatusCheckInterval>30000</publisherConnectionStatusCheckInterval>
               <!--Number of events that could be queued at receiver before they are synced between CEP/DAS nodes-->
               <receiverQueueSize>1000000</receiverQueueSize>
               <!--Max total size of events that could be queued at receiver before they are synced between CEP/DAS nodes-->
               <receiverQueueMaxSizeMb>10</receiverQueueMaxSizeMb>
               <!--Number of events that could be queued at publisher to sync output between CEP/DAS nodes-->
               <publisherQueueSize>1000000</publisherQueueSize>
               <!--Max total size of events that could be queued at publisher to sync output between CEP/DAS nodes-->
               <publisherQueueMaxSizeMb>10</publisherQueueMaxSizeMb>
           </eventSync>
           <management>
               <hostName>172.18.1.217</hostName>
               <port>10005</port>
               <tryStateChangeInterval>15000</tryStateChangeInterval>
               <stateSyncRetryInterval>10000</stateSyncRetryInterval>
           </management>
           <presentation>
               <hostName>0.0.0.0</hostName>
               <port>11000</port>
               <!--Size of TCP event publishing client's send buffer in bytes-->
               <publisherTcpSendBufferSize>5242880</publisherTcpSendBufferSize>
               <!--Character encoding of TCP event publishing client-->
               <publisherCharSet>UTF-8</publisherCharSet>
               <publisherBufferSize>1024</publisherBufferSize>
               <publisherConnectionStatusCheckInterval>30000</publisherConnectionStatusCheckInterval>
           </presentation>
       </mode>
   
       <!-- Distributed Mode Config -->
       <mode name="Distributed" enable="false">
           <nodeType>
               <worker enable="true"/>
               <manager enable="true">
                   <hostName>0.0.0.0</hostName>
                   <port>8904</port>
               </manager>
               <presenter enable="false">
                   <hostName>0.0.0.0</hostName>
                   <port>11000</port>
               </presenter>
           </nodeType>
           <management>
               <managers>
                   <manager>
                       <hostName>localhost</hostName>
                       <port>8904</port>
                   </manager>
                   <manager>
                       <hostName>localhost</hostName>
                       <port>8905</port>
                   </manager>
               </managers>
               <!--Connection re-try interval to connect to Storm Manager service in case of a connection failure-->
               <reconnectionInterval>20000</reconnectionInterval>
               <!--Heart beat interval (in ms) for event listeners in "Storm Receivers" and "CEP Publishers" to acknowledge their
               availability for receiving events"-->
               <heartbeatInterval>5000</heartbeatInterval>
               <!--Storm topology re-submit interval in case of a topology submission failure-->
               <topologyResubmitInterval>10000</topologyResubmitInterval>
           </management>
           <transport>
               <!--Port range to be used for events listener servers in "Storm Receiver Spouts" and "CEP Publishers"-->
               <portRange>
                   <min>15000</min>
                   <max>15100</max>
               </portRange>
               <!--Connection re-try interval (in ms) for connection failures between "CEP Receiver" to "Storm Receiver" connections
               and "Storm Publisher" to "CEP Publisher" connections-->
               <reconnectionInterval>20000</reconnectionInterval>
               <!--Size of the output queue of each "CEP Receiver" which stores events to be published into "Storm Receivers" .
               This must be a power of two-->
               <cepReceiverOutputQueueSize>8192</cepReceiverOutputQueueSize>
               <!--Size of the output queue of each "Storm Publisher" which stores events to be published into "CEP Publisher" .
               This must be a power of two-->
               <stormPublisherOutputQueueSize>8192</stormPublisherOutputQueueSize>
               <!--Size of TCP event publishing client's send buffer in bytes-->
               <tcpEventPublisherSendBufferSize>5242880</tcpEventPublisherSendBufferSize>
               <!--Character encoding of TCP event publishing client-->
               <tcpEventPublisherCharSet>UTF-8</tcpEventPublisherCharSet>
               <!--Size of the event queue in each storm spout which stores events to be processed by storm bolts -->
               <stormSpoutBufferSize>10000</stormSpoutBufferSize>
               <connectionStatusCheckInterval>20000</connectionStatusCheckInterval>
           </transport>
           <presentation>
               <presentationOutputQueueSize>1024</presentationOutputQueueSize>
               <!--Size of TCP event publishing client's send buffer in bytes-->
               <tcpEventPublisherSendBufferSize>5242880</tcpEventPublisherSendBufferSize>
               <!--Character encoding of TCP event publishing client-->
               <tcpEventPublisherCharSet>UTF-8</tcpEventPublisherCharSet>
               <connectionStatusCheckInterval>20000</connectionStatusCheckInterval>
           </presentation>
           <statusMonitor>
               <lockTimeout>60000</lockTimeout>
               <updateRate>60000</updateRate>
           </statusMonitor>
           <stormJar>org.wso2.cep.storm.dependencies.jar</stormJar>
           <distributedUIUrl></distributedUIUrl>
           <memberUpdateCheckInterval>20000</memberUpdateCheckInterval>
       </mode>
   </eventProcessorConfiguration>

   The following node types are configured for the HA deployment mode in the <IS Analytics_HOME>/repository/conf/event-processor.xml file.

   • eventSync: Both the active and the passive nodes in this setup are event synchronizing nodes as explained in the introduction. Therefore, each node should have the host and the port on which it is operating specified under the <eventSync> element.

     Note that the eventSync port is not automatically updated to the port in which each node operates via port offset.

   • management: In this setup, both the nodes carry out the same tasks, and therefore, both nodes are considered manager nodes. Therefore, each node should have the host and the port on which it is operating specified under the <management> element.

     Note that the management port is not automatically updated to the port in which each node operates via port offset.

   • presentation: You can optionally specify only one of the two nodes in this setup as the presenter node. The dashboards in which processed information is displayed are configured only in the presenter node. Each node should have the host and the port on which the assigned presenter node is operating specified under the <presentation> element. The host and the port as well as the other configurations under the <presentation> element are effective only when the presenter enable="false property is set under the <!-- HA Mode Config --> section.

4. Update the <IS Analytics_HOME>/repository/conf/analytics/spark/spark-defaults.conf file as follows to use the Spark cluster embedded within IS Analytics.

   • Keep the carbon.spark.master configuration as local. This instructs Spark to create a Spark cluster using the Hazelcast cluster.

   • Enter 2 as the value for the carbon.spark.master.count configuration. This specifies that there should be two masters in the Spark cluster. One master serves as an active master and the other serves as a stand-by master. 

   The following example shows the <IS Analytics_HOME>/repository/conf/analytics/spark/spark-defaults.conf file with changes mentioned above.

   carbon.spark.master local
   carbon.spark.master.count 2

   For more information, see Spark Configurations in DAS documentation.

   Important: If the path to <IS Analytics_HOME> is different in the two nodes, please do the following. 

5. In order to share the C-Apps deployed among the nodes, configure the SVN-based deployment synchronizer. For detailed instructions, see Configuring SVN-Based Deployment Synchronizer.

   IS Analytics Minimum High availability Deployment set up does not use a manager and a worker. For the purpose of configuring the deployment synchronizer, you can add the configurations relevant to the manager for the node of your choice, and add the configurations relating to the worker for the other node.

   If you do not configure the deployment synchronizer, you are required to deploy any C-App you use in the IS Analytics Minimum High Availability Deployment set up to both the nodes.

6. If the physical IS Analytics server has multiple network interfaces with different IPs, and if you want Spark to use a specific Interface IP, open either the <IS Analytics_HOME>/bin/load-spark-env-vars.sh file (for Linux) or <IS Analytics_HOME>/bin/load-spark-env-vars.bat file (for Windows), and add the following parameter to configure the Spark IP address. 

   export  SPARK_LOCAL_IP=<IP_Address>

Starting the cluster

Once you complete the configurations mentioned above, start the two IS Analytics nodes. If the cluster is successfully configured, the following CLI logs are generated.

• The following is displayed in the CLIs of both nodes, and it indicates that the registry mounting is successfully done.

  [2016-01-28 14:20:53,596]  INFO {org.wso2.carbon.registry.core.jdbc.EmbeddedRegistryService} -  Configured Registry in 107ms
  [2016-01-28 14:20:53,631]  INFO {org.wso2.carbon.registry.core.jdbc.EmbeddedRegistryService} -  Connected to mount at govregistry in 7ms
  [2016-01-28 14:20:53,818]  INFO {org.wso2.carbon.registry.core.jdbc.EmbeddedRegistryService} -  Connected to mount at govregistry in 0ms

• A CLI log similar to the following is displayed for the first node you start to indicate that it has successfully started.

  [2016-01-28 14:32:40,283]  INFO {org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent} -  Using wka based membership management scheme
  [2016-01-28 14:32:40,284]  INFO {org.wso2.carbon.core.clustering.hazelcast.util.MemberUtils} -  Added member: Host:10.100.0.46, Remote Host:null, Port: 4000, HTTP:-1, HTTPS:-1, Domain: null, Sub-domain:null, Active:true
  [2016-01-28 14:32:40,284]  INFO {org.wso2.carbon.core.clustering.hazelcast.util.MemberUtils} -  Added member: Host:10.100.0.46, Remote Host:null, Port: 4001, HTTP:-1, HTTPS:-1, Domain: null, Sub-domain:null, Active:true
  [2016-01-28 14:32:41,665]  INFO {org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent} -  Hazelcast initialized in 1379ms
  [2016-01-28 14:32:41,728]  INFO {org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent} -  Local member: [9c7619a9-8460-465d-8fd0-7eab1c464386] - Host:10.100.0.46, Remote Host:null, Port: 4000, HTTP:9763, HTTPS:9443, Domain: wso2.carbon.domain, Sub-domain:worker, Active:true
  [2016-01-28 14:32:41,759]  INFO {org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent} -  Elected this member [9c7619a9-8460-465d-8fd0-7eab1c464386] as the Coordinator node
  [2016-01-28 14:32:41,847]  INFO {org.wso2.carbon.event.processor.manager.core.internal.HAManager} -  CEP HA Snapshot Server started on 0.0.0.0:10005
  [2016-01-28 14:32:41,850]  INFO {org.wso2.carbon.event.processor.manager.core.internal.HAManager} -  Became CEP HA Active Member
  [2016-01-28 14:32:41,885]  INFO {org.wso2.carbon.core.clustering.hazelcast.HazelcastClusteringAgent} -  Cluster initialization completed

• Once you start the second node, a CLI log similar to the following will be displayed for the first node to indicate that another node has joined the cluster.

  [2016-01-28 14:34:13,252]  INFO {org.wso2.carbon.core.clustering.hazelcast.wka.WKABasedMembershipScheme} -  Member joined [504bceff-4a08-46fe-83e6-b9561d3fff81]: /10.100.0.46:4001
  [2016-01-28 14:34:15,963]  INFO {org.wso2.carbon.event.processor.manager.commons.transport.client.TCPEventPublisher} -  Connecting to 10.100.0.46:11224
  [2016-01-28 14:34:15,972]  INFO {org.wso2.carbon.event.processor.manager.core.internal.EventHandler} -  CEP sync publisher initiated to Member '10.100.0.46:11224'

• A CLI log similar to the following is displayed for the second node once it joins the cluster.

  [2016-01-28 14:34:27,086]  INFO {org.wso2.carbon.analytics.spark.core.internal.SparkAnalyticsExecutor} -  Spark Master map size after starting masters : 2

Testing the HA deployment

The HA deployment you configured can be tested as follows.

1. Access the Spark UIs of the active master and the stand-by master using < node ip>:8081 in each node.
   • Information relating to the active master is displayed as shown in the example below.
     
   • Information relating to the stand-by master is displayed as shown in the example below.
     
2. Click the links under Running Applications in the Spark UI of the active master to check the Spark application UIs of those applications. A working application is displayed as shown in the following example.
   
3. Click the Environment tab of a Spark application UI to check whether all the configuration parameters are correctly set. You can also check whether the class path variables in this tab can be accessed manually.
   
4. Check the Spark UIs of workers to check whether they have running executors. If a worker UI does not have running executors or if it is continuously creating executors, it indicates an issue in the Spark cluster configuration. The following example shows a worker UI with a running executor.
   
5. Check the symbolic parameter, and check if you could manually access it via a cd <directory> command in the CLI.
6. Log into the IS Analytics Management Console and navigate to Main => Manage => Batch Analytics => Console to open the Interactive Analytics Console. Run a query in this console.