This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

This section describes the prerequisites and instructions on how to start the ESB with the sample configurations, how to start the Axis2 server and deploy the sample back-end services to the Axis2 server as well as how to set up any listeners and transports that are required by the samples.

Once you have set up the samples, you can run them using the sample clients.

Prerequisites

  1. Install all the required software as described in the Installation Prerequisites section.
    • To run the samples, you must have the correct version of the Java Development Kit/JRE as well as Apache Ant installed .
    • To run the JMS samples, you must have ActiveMQ or another JMS provider installed.
  2. Open a command prompt (or a shell in Linux) and go to the <ESB_HOME>\bin directory. Then run the ant command as shown below to build the build.xml file.

  3. Run the ESB in the DEBUG mode. To switch from the default INFO log messages to DEBUG log messages, edit the <ESB_HOME>/repository/conf/log4j.properties file and change the line log4j.category.org.apache.synapse=INFO to log4j.category.org.apache.synapse=DEBUG.

Understanding the samples

The ESB samples use several sample clients, ESB configurations and sample back-end services in order to explain different use cases. The diagram below depicts the interaction between these sample clients, the ESB and the services at a high level. The clients are able to send SOAP/REST or POX messages over transports such as HTTP/HTTPS or JMS with WS-Addressing, or WS-Security. They can send binary optimized content using MTOM, SwA, binary or plain text JMS messages. After mediation through the ESB, the requests are passed over to sample services.

Starting the ESB with a sample configuration

To start the WSO2 ESB with a selected sample configuration

  1. Open a command prompt (or a shell in Linux) and go to the <ESB_HOME>\bin directory.
  2. Execute one of the following commands,  where <n> denotes the number assigned to the sample.
    • On Windows: wso2esb-samples.bat -sn <n>
    • On Linux/Solaris: ./wso2esb-samples.sh -sn <n>

For example, to start the ESB with the Sample 0 configuration on Linux/Solaris, run the following command:

./wso2esb-samples.sh -sn 0

The <ESB_HOME>/repository/samples directory contains all the configuration files of the ESB samples as synapse_sample_<n>.xml files. Here again <n> denotes the sample number of the sample you are running.

For example, the configuration file for Sample 0 is synapse_sample_0.xml.

Starting the Axis2 server

For the ESB samples, a standalone Apache Axis2 Web services engine is used as the back-end server, which is bundled with the WSO2 ESB distribution by default.

Once each back-end service is deployed to the Axis2 server, you need to start the Axis2 server before executing the sample client.

To start the Axis2 server

  1. Open a command prompt (or a shell in Linux) and go to the <ESB_HOME>/samples/axis2Server directory.
  2. Execute one of the following commands 
    • On Windows: axis2server.bat
    • On Linux/Solaris: ./ axis2server.sh

This starts the Axis2 server with the HTTP transport listener on port 9000 and HTTPS on port 9002 respectively.

If you want to start multiple instances of the Axis2 server on different ports, run the following commands.  Give unique names to each server.

./axis2server.sh -http 9001 -https 9005 -name MyServer1
./axis2server.sh -http 9002 -https 9006 -name MyServer2
./axis2server.sh -http 9003 -https 9007 -name MyServer3

Running the commands as specified above will start three instances of the Axis2 server on HTTP ports 9001, 9002 and 9003 respectively.

Deploying sample back-end services

The sample back-end services come with a pre-configured Axis2 server. These sample services demonstrate in-only and in-out SOAP/REST or POX messaging over HTTP/HTTPS and JMS transports using WS-Addressing, and WS-Security. The samples handle binary content using MTOM and SwA.

Each back-end sample service can be found in a separate folder in the <ESB_HOME>/samples/axis2Server/src directory. You need to compile, build and deploy each back-end service to the Axis2 server.

To build and deploy a back-end service

  1. Open a command prompt (or a shell in Linux) and go to the required sample folder in the <ESB_HOME>/samples/axis2Server/src directory.

  2. Run ant from the selected sample directory.

    For example, to build and deploy SimpleStockQuoteService, run the ant command from the  <ESB_HOME>/samples/axis2Server/src/SimpleStockQuoteService directory, as follows:

    user@host:/tmp/wso2esb-2.0/samples/axis2Server/src/SimpleStockQuoteService$ ant
Buildfile: build.xml
 ...
build-service:
   ....
      [jar] Building jar: /tmp/wso2esb-2.0/samples/axis2Server/repository/services/SimpleStockQuoteService.aar

BUILD SUCCESSFUL
Total time: 3 seconds

Sample back-end services explained

  1. SimpleStockQuoteService

    This service has four operations:

    • getQuote (in-out) - Generates a sample stock quote for a given symbol.
    • getFullQuote (in-out) - Generates a history of stock quotes for a symbol for a number of days.
    • getMarketActivity (in-out) - Returns stock quotes for a list of given symbols.
    • placeOrder (in-only) - Accepts a one way message for an order.
  2. SecureStockQuoteService

    This service is a clone of the SimpleStockQuoteService, but has WS-Security enabled as well as an attached security policy for signing and encrypting messages.

  3. MTOMSwASampleService

    This service has three operations:

    • uploadFileUsingMTOM (in-out) - Accepts a binary image from the SOAP request as MTOM, and returns this image back again as the response.
    • uploadFileUsingSwA (in-out) - Accepts a binary image from the SOAP request as SwA, and returns this image back again as the response.
    • oneWayUploadUsingMTOM (in-only) - Saves the request message to the disk.

   This service also demonstrates the use of MTOM and SwA.

Configuring WSO2 ESB to use the JMS transport

To run some of the ESB samples, you need to configure WSO2 ESB's JMS transport with ActiveMQ 5.5.0 or higher. For instructions on configuring WSO2 ESB with ActiveMQ, see Configure with ActiveMQ.

Configuring WSO2 ESB to use the mail transport

To enable the mail transport sender for the ESB samples

  • Uncomment the mail transport sender configuration in the <ESB_HOME>/ repository/conf/axis2/axis2.xml file and make sure it points to a valid SMTP configuration for an actual scenario.
<transportSender name="mailto" class="org.apache.synapse.transport.mail.MailTransportSender">
    <parameter name="mail.smtp.host">smtp.gmail.com</parameter>
    <parameter name="mail.smtp.port">587</parameter>
    <parameter name="mail.smtp.starttls.enable">true</parameter>
    <parameter name="mail.smtp.auth">true</parameter>
    <parameter name="mail.smtp.user">synapse.demo.0</parameter>
    <parameter name="mail.smtp.password">mailpassword</parameter>
    <parameter name="mail.smtp.from">synapse.demo.0@gmail.com</parameter>
</transportSender>

To enable the mail transport receiver for the ESB samples

  • Uncomment the mail transport receiver configuration in the <ESB_HOME>/repository/conf/axis2/axis2.xml file.
<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.MailTransportListener">
</transportReceiver>

You need to provide correct parameters for a valid mail account at the service level.

Configuring WSO2 ESB to use the NHTTP transport

To run the samples that use the NHTTP transport, you need to enable the NHTTP transport.

To enable the NHTTP transport

  • Edit the <ESB_HOME>/ repository/conf/carbon.xml file and replace the line <ConfigurationFile>${carbon.home}/repository/conf/axis2/axis2.xml</ConfigurationFile> with  <ConfigurationFile>${carbon.home}/repository/conf/axis2/axis2_nhttp.xml</ConfigurationFile>.

Configuring WSO2 ESB to use the FIX transport

To run the FIX samples, you need to have a local Quickfix/J installation. To download the latest version of Quickfix/J, go to  http://www.quickfixj.org/downloads

To enable the FIX transport sender and receiver

  • Uncomment the FIX transport sender and FIX transport receiver configurations in the <ESB_HOME>/ repository/conf/axis2/axis2.xml file. 

Configuring the ESB for FIX samples

In order to configure WSO2 ESB to run the FIX samples, you need to create the FIX configuration files.

You can find the config files in <ESB_HOME>/repository/samples/resources/fix folder.

To create the FIX configuration files

  1. Put the following entries in a file named fix-synapse.cfg

    [default]
FileStorePath=repository/logs/fix/store
FileLogPath=repository/logs/fix/log
ConnectionType=acceptor
StartTime=00:00:00
EndTime=00:00:00
HeartBtInt=30
ValidOrderTypes=1,2,F
SenderCompID=SYNAPSE
TargetCompID=BANZAI
UseDataDictionary=Y
DefaultMarketPrice=12.30

 [session]
BeginString=FIX.4.0
SocketAcceptPort=9876

  2. Put the following entries in a file named synapse-sender.cfg

    [default]
FileStorePath=repository/logs/fix/data
FileLogPath=repository/logs/fix/log
SocketConnectHost=localhost
StartTime=00:00:00
EndTime=00:00:00
HeartBtInt=30
ReconnectInterval=5
SenderCompID=SYNAPSE
TargetCompID=EXEC
ConnectionType=initiator

 [session]
BeginString=FIX.4.0
SocketConnectPort=19876

The FileStorePath property in the  fix-synapse.cfg file and synapse-sender.cfg  file should point to two different directories in your local file system. Once the samples are executed, Synapse will create FIX message stores in these two directories.

Configuring sample FIX applications

If you use a binary distribution of Quickfix/J, the two samples and their configuration files are all packed to a single JAR file called quickfixj-examples.jar.

To configure sample FIX applications

  1. Either modify the quickfixj-examples.jar  file or pass the new configuration file as a command line parameter.

    To modify the quickfixj-examples.jar file:

    • Extract the JAR file, modify the configuration files and pack them to a JAR file with the same name again.

    To pass the new configuration file as a command line parameter:

    • Copy the config files from the   <ESB_HOME>/repository/samples/resources/fix directory to the <QFJ_HOME>/etc directory. Then execute the sample apps from <QFJ_HOME>/bin, ./banzai.sh/bat ../etc/banzai.cfg executor.sh/bat ../etc/executor.cfg.

  2. Locate and edit the FIX configuration file of Executor to be as follows. This file is usually namedexecutor.cfg

    [default]
FileStorePath=examples/target/data/executor
ConnectionType=acceptor
StartTime=00:00:00
EndTime=00:00:00
HeartBtInt=30
ValidOrderTypes=1,2,F
SenderCompID=EXEC
TargetCompID=SYNAPSE
UseDataDictionary=Y
DefaultMarketPrice=12.30

[session]
BeginString=FIX.4.0
SocketAcceptPort=19876

  3. Locate and edit the FIX configuration file of Banzai to be as follows. This file is usually named banzai.cfg

    [default]
FileStorePath=examples/target/data/banzai
ConnectionType=initiator
SenderCompID=BANZAI
TargetCompID=SYNAPSE
SocketConnectHost=localhost
StartTime=00:00:00
EndTime=00:00:00
HeartBtInt=30
ReconnectInterval=5

[session]
BeginString=FIX.4.0
SocketConnectPort=9876

The FileStorePath property in the two files above should point to two different directories in your local file system. The launcher scripts for the sample application can be found in the bin directory of the Quickfix/J distribution.

For more information regarding the FIX sample applications, see http://www.quickfixj.org/quickfixj/usermanual/1.5.0/usage/examples.html 

For more information on configuring Quickfix/J applications, see http://www.quickfixj.org/quickfixj/usermanual/1.5.0/usage/configuration.html

Configuring WSO2 ESB to use the VFS transport

To run some of the ESB samples, you need to configure the ESB to enable the VFS listener and the VFS sender. For instructions on configuring the ESB to use the VFS transport, see Enable the VFS transport.

Configuring WSO2 ESB to use the AMQP transport

To configure WSO2 ESB to use the AMQP transport, you need to have QPid  version 1.0-M2 or higher installed and started. You also need to copy the following client JAR files into the <ESB_HOME>/repository/components/lib directory to support AMQP. These files can be found in the lib directory of the QPid installation.

  • qpid-client-1.0-incubating-M2.jar
  • qpid-common-1.0-incubating-M2.jar
  • geronimo-jms_1.1_spec-1.0.jar
  • slf4j-api-1.4.0.jar **
  • slf4j-log4j12-1.4.0.jar **

To configure FIX (Quickfix/J 1.3) with AMQP (QPid-1.0-M2), copy the sl4j-* libraries that come with QPid and ignore the sl4j-* libraries that come with Quickfix/J.

To enable the AMQP transport over the JMS transport

  1. Uncomment the JMS transport listener configuration.

    To enable AMQP over JMS for ESB: 

    • Update the <ESB_HOME>/repository/conf/axis2/axis2.xml file by uncommenting the JMS transport listener configuration.

    To enable JMS support for the sample Axis2 server:

    • Update the <ESB_HOME>/samples/axis2Server/repository/conf/axis2.xml file by uncommenting the JMS transport listener configuration.
    <\!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment \-->
<transportReceiver name="jms">
</transportReceiver>

<transportSender name="jms">
</transportReceiver>

  2. Locate and edit the AMQP connection settings file for the message consumer. This file is named direct.properties and can be found in the <ESB_HOME>/repository/samples/resources/fix directory.

    java.naming.factory.initial = org.apache.qpid.jndi.PropertiesFileInitialContextFactory
# register some connection factories
# connectionfactory.[jndiname] = [ConnectionURL]
connectionfactory.qpidConnectionfactory = amqp://guest:guest@clientid/test?brokerlist='tcp://localhost:5672'
# Register an AMQP destination in JNDI
# destination.[jniName] = [BindingURL]
destination.directQueue = direct://amq.direct//QpidStockQuoteService?routingkey='QpidStockQuoteService'
destination.replyQueue = direct://amq.direct//replyQueue?routingkey='replyQueue'

  3. Locate and edit the AMQP connection settings file for WSO2 ESB. This file is named conn.properties and can be found in the <ESB_HOME>/repository/samples/resources/fix directory.

    #initial context factory
\#java.naming.factory.initial =org.apache.qpid.jndi.PropertiesFileInitialContextFactory
# register some connection factories
# connectionfactory.[jndiname] = [ConnectionURL]
connectionfactory.qpidConnectionfactory=amqp://guest:guest@clientid/test?brokerlist='tcp://localhost:5672'
# Register an AMQP destination in JNDI
# destination.[jndiName] = [BindingURL]
destination.directQueue=direct://amq.direct//QpidStockQuoteService

Configuring WSO2 ESB to use the TCP transport

To enable the TCP transport for samples

  •  Open the <ESB_HOME>/repository/conf/axis2/axis2.xml file in a text editor and add the following transport receiver configuration and sender configuration.
<transportReceiver name="tcp" class="org.apache.axis2.transport.tcp.TCPTransportListener">
    <parameter name="transport.tcp.port">6060</parameter>
</transportReceiver>

<transportSender name="tcp" class="org.apache.axis2.transport.tcp.TCPTransportSender"/>

If you want to use the sample Axis2 client to send TCP messages, you have to uncomment the TCP transport sender configuration in the <ESB_HOME>/samples/axis2Client/client_repo/conf/axis2.xml file.

Configuring WSO2 ESB to use the UDP transport

To enable the UDP transport for samples

  • Open the <ESB_HOME>/repository/conf/axis2/axis2.xml file in a text editor and add the following transport configurations.
<transportReceiver name="udp" class="org.apache.axis2.transport.udp.UDPListener"/>
<transportSender name="udp" class="org.apache.axis2.transport.udp.UDPSender"/>

If you want to use the sample Axis2 client to send UDP messages, add the UDP transport sender configuration in the <ESB_HOME>/ samples/axis2Client/client_repo/conf/axis2.xml file.

Configuring the ESB for script mediator support

The Script mediator is a Synapse extension, and thus all pre-requisites for all BSF supported scripting languages may not be bundled by default with the ESB distribution. Before you use some script mediators, you need to manually add the required JAR files to the <ESB_HOME>/repository/components/lib directory, and optionally perform other installation tasks as required by the individual scripting language. The following section describes this in detail.

JavaScript support

The JavaScript/E4X support is enabled by default and comes ready-to-use with the WSO2 ESB distribution.

Ruby support

For Ruby support you need to install WSO2 Carbon - JRuby Engine for Mediation. This is available in the WSO2 P2 repository. Use the WSO2 Carbon Component Manager UI in the management console to connect to the WSO2 P2 repository and install WSO2 Carbon - JRuby Engine for Mediation. This will install a JRuby 1.3 engine in the ESB runtime.

Alternatively, you can also download and install the JRuby engine manually. Download the jruby-complete-1.3.0.wso2v1.jar file from the WSO2 P2 repository and copy it into the <ESB_HOME>/repository/components/dropins directory.

Setting up the databases

To run the samples that involve database integration, you need to setup the databases, sample tables and reusable data sources as required by the samples. Most samples require a remote Derby database, whereas a few samples require a MySQL database.

Setting up with Apache Derby

For instructions on installing and configuring the remote Derby database, see Setting up the remote Derby database.

When the database is installed and configured, you can create the sample tables and insert sample data into the tables.

To create a new table in the database

  • Execute the following statement.

    CREATE table company(name varchar(10) primary key, id varchar(10), price double);

To insert sample data into the table

  • Execute the following statement.

    INSERT into company values ('IBM','c1',0.0);
INSERT into company values ('SUN','c2',0.0);
INSERT into company values ('MSFT','c3',0.0);

Setting up with MySQL 

For instructions on installing and configuring the MySQL database, see Setting up the MySQL database.

When the database is installed and configured, you can create the sample tables, insert sample data into the tables and create the two stored procedures. 

To create a new table in the database

  • Execute the following statement.

    CREATE table company(name varchar(10) primary key, id varchar(10), price double);

To insert sample data into the table

  • Execute the following statements.

    INSERT into company values ('IBM','c1',0.0);
INSERT into company values ('SUN','c2',0.0);
INSERT into company values ('MSFT','c3',0.0);

To create the stored procedures

  • Execute the following statements.

    CREATE PROCEDURE getCompany(compName VARCHAR(10)) SELECT name, id, price FROM company WHERE name = compName;
CREATE PROCEDURE updateCompany(compPrice DOUBLE,compName VARCHAR(10)) UPDATE company SET price = compPrice WHERE name = compName;

Setting up Synapse DataSources

Definition of a reusable database connection pool or datasources can be done using the datasources.properties file. It is possible to configure any number of datasources. Currently only two types of datasources are supported and those are based on the Apache DBCP datasources. The two types are BasicDataSource and PerUserPoolDataSource (based on Apache DBCP). The following configuration includes both definitions.

datasources.properties configuration

\###############################################################################
# DataSources Configuration
\###############################################################################
synapse.datasources=lookupds,reportds
synapse.datasources.icFactory=com.sun.jndi.rmi.registry.RegistryContextFactory
synapse.datasources.providerPort=2199
# If following property is present , then assumes that there is an external JNDI provider and will not start a RMI registry
\#synapse.datasources.providerUrl=rmi://localhost:2199

synapse.datasources.lookupds.registry=Memory
synapse.datasources.lookupds.type=BasicDataSource
synapse.datasources.lookupds.driverClassName=org.apache.derby.jdbc.ClientDriver
synapse.datasources.lookupds.url=jdbc:derby://localhost:1527/lookupdb;create=false
# Optionally you can specifiy a specific password provider implementation which overrides any globally configured provider
synapse.datasources.lookupds.secretProvider=org.apache.synapse.commons.security.secret.handler.SharedSecretCallbackHandler
synapse.datasources.lookupds.username=esb
# Depending on the password provider used, you may have to use an encrypted password here\!
synapse.datasources.lookupds.password=esb
synapse.datasources.lookupds.dsName=lookupdb
synapse.datasources.lookupds.maxActive=100
synapse.datasources.lookupds.maxIdle=20
synapse.datasources.lookupds.maxWait=10000

synapse.datasources.reportds.registry=JNDI
synapse.datasources.reportds.type=PerUserPoolDataSource
synapse.datasources.reportds.cpdsadapter.factory=org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS
synapse.datasources.reportds.cpdsadapter.className=org.apache.commons.dbcp.cpdsadapter.DriverAdapterCPDS
synapse.datasources.reportds.cpdsadapter.name=cpds
synapse.datasources.reportds.dsName=reportdb
synapse.datasources.reportds.driverClassName=org.apache.derby.jdbc.ClientDriver
synapse.datasources.reportds.url=jdbc:derby://localhost:1527/reportdb;create=false
# Optionally you can specifiy a specific password provider implementation which overrides any globally configured provider
synapse.datasources.reportds.secretProvider=org.apache.synapse.commons.security.secret.handler.SharedSecretCallbackHandler
synapse.datasources.reportds.username=esb
# Depending on the password provider used, you may have to use an encrypted password here\!
synapse.datasources.reportds.password=esb
synapse.datasources.reportds.maxActive=100
synapse.datasources.reportds.maxIdle=20
synapse.datasources.reportds.maxWait=10000

The configuration is similar to the log4j appender configuration.

It requires two databases, follow the steps in the section above to create the two databases  jdbc:derby://localhost:1527/lookupdb and  jdbc:derby://localhost:1527/reportdb  using the user name and password as esb. Fill in the data for the two databases as described in the section above.

To secure data sources password, you should use the mechanism for securing secret Information. If that mechanism is used, the passwords that have been specified are considered as aliases and those are used for picking actual passwords. To get password securely, you should set the password provider for each data source. The password provider should be an implementation of the following:

  • org.apache.synapse.commons.security.secret.SecretCallbackHandler.

To run this sample

  • Uncomment secret-conf.properties, cipher-text.properties and datasources.properties. These files can be found in the <ESB_HOME>/repository/conf directory.

 

  • No labels