Default Ports of WSO2 Products

This page describes the default ports that are used for each WSO2 product when the port offset is 0. If you are running multiple WSO2 products on the same server, you must set the <offset> value in <PRODUCT_HOME>/repository/conf/carbon.xml to a different value for each product so that there are no port conflicts. For example, if you are running two WSO2 products on the same server, and you set the port offset to 1 in one product and 2 in the second product, the management console port will be changed from the default of 9443 to 9444 in the first product and to 9445 in the second product. See here for more information on changing the offset.

Changing the offset for default ports

When you run multiple WSO2 products, multiple instances of the same product, or multiple WSO2 product clusters on the same server or virtual machines (VMs), you must change their default ports with an offset value to avoid port conflicts. The default HTTP and HTTPS ports (without offset) of a WSO2 product are 9763 and 9443 respectively. Port offset defines the number by which all ports defined in the runtime such as the HTTP/S ports will be changed. For example, if the default HTTP port is 9763 and the port offset is 1, the effective HTTP port will change to 9764. For each additional WSO2 product instance, you set the port offset to a unique value. The default port offset is 0.

There are two ways to set an offset to a port:

• Pass the port offset to the server during startup. The following command starts the server with the default port incremented by 3:./wso2server.sh -DportOffset=3

• Set the Ports section of <PRODUCT_HOME>/repository/conf/carbon.xml as follows:<Offset>3</Offset>

Usually, when you offset the port of the server, all ports it uses are changed automatically. However, there are few exceptions as follows in which you have to change the ports manually according to the offset. The following table indicates the changes that occur when the offset value is modified.