Enabling SSL Tunneling through a Proxy Server

If your proxy service connects to a back-end server through a proxy server, you can enable secure socket layer (SSL) tunneling through the proxy server to prevent any intermediate proxy services from interfering with the communication. SSL tunneling is available when your proxy service uses the HTTP PassThrough transport or the HTTP-NIO transport .

The following section walks you through the steps to enable SSL tunneling through a proxy server. Here we will be using Squid as the caching and forwarding HTTP web proxy.

Setting up Squid

Follow the steps below to set up Squid:

1. Install Squid as described here.

2. Add the following lines in the squid.conf file:

   acl SSL_ports port 443 8443 8448 8248 8280
   acl Safe_ports port 80 # http
   acl Safe_ports port 21 # ftp
   acl Safe_ports port 443 # https
   acl Safe_ports port 70 # gopher
   acl Safe_ports port 210 # wais
   acl Safe_ports port 1025–65535 # unregistered ports
   acl Safe_ports port 280 # http-mgmt
   acl Safe_ports port 488 # gss-http
   acl Safe_ports port 591 # filemaker
   acl Safe_ports port 777 # multiling http
   acl CONNECT method CONNECT
   
   auth_param basic program /usr/lib/squid3/basic_ncsa_auth /etc/squid3/basic_pw
   auth_param basic children 5
   auth_param basic realm Squid proxy-caching web server
   auth_param basic credentialsttl 2 hours
   auth_param basic casesensitive off
   
   acl ncsa_users proxy_auth REQUIRED
   http_access allow ncsa_users
   
   http_port 3128

Configuring SSL tunneling

Follow the steps below to configure SSL tunneling through the proxy server:

1. In <ESB_HOME>/repository/conf/axis2/axis2.xml, add the following parameters to the transportSender configuration for  PassThroughHttpSender, PassThroughHttpSSLSender , HttpCoreNIOSender , and HttpCoreNIOSSLSender :

   • <parameter name="http.proxyHost" locked="false">hostName</parameter>

   • <parameter name="http.proxyPort" locked="false">portNumber</parameter>

     where  hostName  and  portNumber specify the host name and port number of the proxy server.
2. Uncomment the following parameter in the PassThroughHttpSSLSender and HttpCoreNIOSSLSender configurations and change the value to AllowAll.
   

   <parameter name="HostnameVerifier">AllowAll</parameter>

For example, if the host name and port number of proxy server is localhost:8080, your transportSender configurations for PassThroughHttPSender and PassThroughHttpSSLSender would be as follows:

<transportSender name="http" class="org.apache.synapse.transport.passthru.PassThroughHttpSender">
        <parameter name="non-blocking" locked="false">true</parameter>
        <parameter name="http.proxyHost" locked="false">localhost</parameter>
        <parameter name="http.proxyPort" locked="false">8080</parameter>
</transportSender>

<transportSender name="https" class="org.apache.synapse.transport.passthru.PassThroughHttpSSLSender">
        <parameter name="non-blocking" locked="false">true</parameter>
        <parameter name="keystore" locked="false">
            <KeyStore>
                <Location>repository/resources/security/wso2carbon.jks</Location>
                <Type>JKS</Type>
                <Password>wso2carbon</Password>
                <KeyPassword>wso2carbon</KeyPassword>
            </KeyStore>
        </parameter>
        <parameter name="truststore" locked="false">
            <TrustStore>
                <Location>repository/resources/security/client-truststore.jks</Location>
                <Type>JKS</Type>
                <Password>wso2carbon</Password>
            </TrustStore>
        </parameter>
        <parameter name="http.proxyHost" locked="false">localhost</parameter>
        <parameter name="http.proxyPort" locked="false">8080</parameter>
        <parameter name="HostnameVerifier">AllowAll</parameter>
</transportSender>