This documentation is for WSO2 ESB version 4.5.1. View documentation for the latest release.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

The HL7 Transport ( New in Carbon 4.0 ) is available as an installable feature in WSO2 products. The user can simply plug it in if necessity, through the installation of the relevant feature. For instructions to install HL7 transport and adding a proxy service, refer to

The HL7 transport configuration is as follows

<transportConfig>
    <transportReceiver name="hl7" class="org.wso2.carbon.business.messaging.hl7.transport.HL7TransportListener">
        <parameter name="port">9292</parameter>
    </transportReceiver>
    <transportSender name="hl7" class="org.wso2.carbon.business.messaging.hl7.transport.HL7TransportSender">
        <!--parameter name="non-blocking">true</parameter-->
    </transportSender>
</transportConfig>

HL7 Transport supports the following in "Axis2 Transport HL7" feature version 4.0.0 onwards.

HL7 Conformance Profile Support

The service-level parameter "transport.hl7.ConformanceProfilePath" points to a URL where the conformance profile XML can be found.

HL7 Message Pre-Processing

An implementation of the interface "org.wso2.carbon.business.messaging.hl7.common.HL7MessagePreprocessor" can be used to process raw HL7 messages before parsing them, so that potential errors in the messages can be rectified using it. The service-level parameter used to mention the implementation class is "transport.hl7.MessagePreprocessorClass".

Capability to Disable Automatic ACK/NACK and Enable at Suitable Times

Supports automatic message acknowledgement and validation. The user is given control to send back an ACK/NACK message from an ESB sequence, when automatic message acknowledgement is disabled. Different types of message validations done at the message builder are removed for behavioral consistency of the message builder with the transport.

Some example usage scenarios are given below:

1. When using a transport such as HTTP, to create an ACK/NACK message from an HL7 message in the flow, specify an axis2 scope message context property "HL7_GENERATE_ACK", and set its value to true. It ensures that an ACK/NACK message is created automatically when a message is sent out (using the HL7 formatter). By default, an ACK message is created. If a NACK message is required to be generated, the message context properties "HL7_RESULT_MODE" and "HL7_NACK_MESSAGE" have to be used.

2. Adding two new service-level parameters to be used by a proxy service.

<proxy>...
   <parameter name="transport.hl7.AutoAck">true|false</parameter> <!-- default is true -->
   <parameter name="transport.hl7.ValidateMessage">true|false</parameter> <!-- default is true -->
</proxy>

3. When ‘AutoAck’ is false, the following properties can be set inside an ESB sequence.

<property name="HL7_RESULT_MODE" value="ACK|NACK" scope="axis2" /> <!-- notice the properties should be in axis2 scope -->

4. When the result mode is ‘NACK’, following property can be used to give a custom description of the error message.

<property name="HL7_NACK_MESSAGE" value="<ERROR MESSAGE>" scope="axis2" />

5. The property "HL7_RAW_MESSAGE" in the axis2 scope can be used to retrieve the original raw EDI format HL7 message in an ESB sequence. As the user doesn't have to again convert from XML to EDI, this usage may be particularly helpful inside a custom mediator.

Synchronization with Builder/Formatter

The transport listener/sender, message builder/formatter uses a common implementation of parsing/validation logic of HL7 messages. Set the Java system property "ca.uhn.hl7v2.llp.charset" to control the encoding type of incoming messages. More information about this configuration will be coming up soon.

  • No labels