RabbitMQ AMQP Transport

This page describes how to install and configure the RabbitMQ AMQP transport. It contains the following sections:

Introduction

AMQP is a wire-level messaging protocol that describes the format of the data that is sent across the network. If a system or application can read and write AMQP, it can exchange messages with any other system or application that understands AMQP, regardless of the implementation language.

The RabbitMQ AMQP transport is implemented using the RabbitMQ Java Client. It allows you to send or receive AMQP messages by calling an AMQP broker (RabbitMQ) directly without the need to use different transport mechanisms, such as JMS. 

The following diagram illustrates a scenario where the ESB uses the RabbitMQ AMQP transport to exchange messages between RabbitMQ Java Clients by calling RabbitMQ brokers.

Installing the RabbitMQ AMQP Transport

The RabbitMQ AMQP transport is developed as a separate module of the transports project. You can install it via the ESB Management Console by accessing the relevant jar files from the http://product-dist.wso2.com/p2/extras/releases/4.2.0/rabbitmq-axis2-transport/ external repository.

To install the RabbitMQ AMQP transport as a feature:

1. Start the ESB server .
2. On the Configure tab in the Management Console, click Features. The Feature Management page appears.
3. On the  Feature Management page, click Repository Management and then click Add Repository. 
   
4. Provide a name for the repository and enter  http://product-dist.wso2.com/p2/extras/releases/4.2.0/rabbitmq-axis2-transport/  as the repository location URL, then click Add. The repository you created will appear in the Available Repositories list.
5. Click the Available Features tab.
6. Select the added repository and the Show only the latest versions check box, then click Find features. You will see that Axis2 Transport RabbitMQ AMQP is listed as a feature.
7. Select the Axis2 Transport RabbitMQ AMQP check box and click Install. The Install Details appear.
8. Click Next. The License Agreement appears.
9. Read and accept the terms of the license agreement, and then click Next. The installation starts and it may take a few minutes for the installation to complete.
10. Once the installation process is complete, stop the ESB server.

You are now ready to configure the AMQP transport listener and sender in axis2.xml.

Configuring the RabbitMQ AMQP Transport

1. Open {ESB_HOME}/repository/conf/axis2/axis2.xml for editing.

2. In the transport listeners section, add the following RabbitMQ transport listener, replacing the values with your host, port, username, and password to connect to the AMQP broker (you can optionally create multiple connection factories if you want this listener to connect to multiple brokers):

   <transportReceiver name="rabbitmq" class="org.apache.axis2.transport.rabbitmq.RabbitMQListener">
      <parameter name="AMQPConnectionFactory" locked="false">
         <parameter name="rabbitmq.server.host.name" locked="false">192.168.0.3</parameter>
         <parameter name="rabbitmq.server.port" locked="false">5672</parameter>
         <parameter name="rabbitmq.server.user.name" locked="false">user</parameter>
         <parameter name="rabbitmq.server.password" locked="false">abc123</parameter>
      </parameter>
   </transportReceiver>

3. In the transport senders section, add the following RabbitMQ transport sender, which will be used for sending AMQP messages to a queue:

   <transportSender name="rabbitmq" class="org.apache.axis2.transport.rabbitmq.RabbitMQSender"/>

4. Start the ESB server.

You are now ready to create the RabbitMQ proxy service.

Creating the RabbitMQ Proxy Service

Following is a sample RabbitMQ proxy service named AMQPProxy that consumes AMQP messages from one RabbitMQ broker and publishes them to another:

<proxy xmlns="http://ws.apache.org/ns/synapse" name="AMQPProxy" transports="rabbitmq" statistics="disable" trace="disable" startOnLoad="true">
   <target>
      <inSequence>
         <log level="full"/>
         <property name="OUT_ONLY" value="true"/>
         <property name="FORCE_SC_ACCEPTED" value="true" scope="axis2"/>
      </inSequence>
      <endpoint>
         <address
         uri="rabbitmq:/AMQPProxy?rabbitmq.server.host.name=192.168.0.3'&'rabbitmq.server.port=5672'&'rabbitmq.server.user.name=user'&'rabbitmq.server.password=abc123'&'rabbitmq.queue.name=queue2'&'rabbitmq.exchange.name=exchange2"/>
      </endpoint>
   </target>
   <parameter name="rabbitmq.queue.name">queue1</parameter>
   <parameter name="rabbitmq.exchange.name">exchange1</parameter>
   <parameter name="rabbitmq.connection.factory">AMQPConnectionFactory</parameter>
   <description></description>
</proxy>

Note the following:

• The transport keyname is rabbitmq. You specify this keyname in the transports parameter (transports="rabbitmq").
• The endpoint specifies where the messages will be published. The URI prefix is rabbbitmq so that the RabbitMQ AMQP transport will be used to publish the message. Be sure to specify the rest of the parameters in the URI as shown above. If you do not which RabbitMQ exchange to use, leave the value blank to use the default exchange.
• The proxy is defined as OUT_ONLY, because it does not expect a response from the endpoint.
• The rabbitmq.queue.name parameter specifies the queue on which the proxy service will listen and consume messages. If you do not specify a name for this parameter, the name of the proxy service is also used as the queue name.
• The rabbitmq.connection.factory parameter specifies the listener that will listen on the queue and consume messages. In this example, the connection factory is set to the name of the listener we created earlier (AMQPConnectionFactory).
•  The rabbitmq.exchange.name parameter specifies the RabbitMQ exchange to which the queue is bound. If you do not want to use a specific exchange, leave this value blank to use the default exchange.

RabbitMQ AMQP Transport Properties

Following is a quick reference to all the RabbitMQ AMQP transport properties. The rabbitmq.server properties refer to the server where RabbitMQ is running.

• rabbitmq.server.host.name – Host name of the server.
• rabbitmq.server.port – Port value of the server.
• rabbitmq.server.user.name – User name to connect to the server.
• rabbitmq.server.password – Password of the account to connect to the server.
• rabbitmq.server.virtual.host – Virtual host name of the server, if any.
• rabbitmq.queue.name – Queue name to send or consume messages.
• rabbitmq.exchange.name – Name of the RabbitMQ exchange to which the queue is bound.

You can modify the sample proxy service above to handle cases where you only want to receive AMQP messages but send messages in a different format, or receive messages in a different format and send AMQP messages. You can also modify the proxy service to work with a different transport. For example, you could create a proxy that uses the RabbitMQ AMQP transport to listen to messages and then sends them over HTTP or JMS.

Sample Java Clients

This section provides sample Java clients that you can use to send and receive AMQP messages. These clients can be used to test the scenario where the Sender publishes a message to a RabbitMQ AMQP queue, which is consumed by the ESB and published to another queue, which in turn is consumed by the Receiver. When you run these clients, the Receiver will get the messages sent by the Sender, confirming that you have correctly configured the RabbitMQ AMQP transport.

AMQP Sender

The following Java client sends SOAP XML messages to a RabbitMQ queue. This client was tested with SOAP messages sent and consumed from AMQP broker queues with content type “text/xml”. When specifying the queue name for publishing messages, be sure to specify the same queue where the RabbitMQ transport listener is listening.

ConnectionFactory factory = new ConnectionFactory();
factory.setHost(host);
factory.setUsername(userName);
factory.setPassword(password);
factory.setPort(port);
Connection connection = factory.newConnection();
Channel channel = connection.createChannel();
channel.queueDeclare(queueName, false, false, false, null);
channel.exchangeDeclare(exchangeName, "direct", true);
channel.queueBind(queueName, exchangeName, routingKey);

// The message to be sent
String message = "<soapenv:Envelope
                  xmlns:soapenv=\"http://schemas.xmlsoap.org/soap/envelope">\n" +  
                 "<soapenv:Header/>\n" +
                 "<soapenv:Body>\n" +
                 "  <p:greet xmlns:p=\"http://greet.service.kishanthan.org\">\n" + 
                 "     <in>" + name + "</in>\n" +
                 "  </p:greet>\n" +
                 "</soapenv:Body>\n" +
                 "</soapenv:Envelope>";

// Populate the AMQP message properties
AMQP.BasicProperties.Builder builder = new
AMQP.BasicProperties().builder();
builder.messageId(messageID);
builder.contentType("text/xml");
builder.replyTo(replyToAddress);
builder.correlationId(correlationId);
builder.contentEncoding(contentEncoding);

// Custom user properties
Map<String, Object> headers = new HashMap<String, Object>();
headers.put("SOAP_ACTION", "greet");
builder.headers(headers);

// Publish the message to exchange
channel.basicPublish(exchangeName, queueName, builder.build(), message.getBytes());

AMQP Receiver

When specifying the queue name for consuming messages, be sure to specify the same queue configured in the proxy service endpoint.

ConnectionFactory factory = new ConnectionFactory();
factory.setHost(hostName);
factory.setUsername(userName);
factory.setPassword(password);
factory.setPort(port);
Connection connection = factory.newConnection();
Channel channel = connection.createChannel();
channel.queueDeclare(queueName, false, false, false, null);
channel.exchangeDeclare(exchangeName, "direct", true);
channel.queueBind(queueName, exchangeName, routingKey);

// Create the consumer
QueueingConsumer consumer = new QueueingConsumer(channel);
channel.basicConsume(queueName, true, consumer);

// Start consuming messages
while (true) {
   QueueingConsumer.Delivery delivery = consumer.nextDelivery();
   String message = new String(delivery.getBody());
}