Encrypting Passwords with Cipher Tool

The instructions on this page explain how plain text passwords in configuration files can be encrypted using the secure vault implementation that is built into WSO2 products. Note that you can customize the default secure vault configurations in the product by implementing a new secret repository, call back handler etc. Read more about the Secure Vault implementation in WSO2 products.

In any WSO2 product that is based on Carbon 4.4.0 or a later version, the Cipher Tool feature will be installed by default. You can use this tool to easily encrypt passwords or other elements in configuration files.

Note the following before you begin:

If you are a developer who is building a Carbon product, see the topic on enabling Cipher Tool for password encryption for instructions on how to include the Cipher Tool as a feature in your product build.
The default keystore that is shipped with your WSO2 product (i.e. wso2carbon.jks) is used for password encryption by default. See this link for details on how to set up and configure new keystores for encrypting plain text passwords.

Follow the topics given below for instructions.

Encrypting passwords using the automated process

This automated process can only be used for passwords that can be given as an xpath. If you cannot give an xpath for the password that you want to encrypt, you must use the manual encryption process explained in the next section.

Follow the steps given below to have passwords encrypted using the automated process:

The first step is to update the cipher-tool.properties file and the cipher-text.properties file with information of the passwords that you want to encrypt.
1. Open the cipher-tool.properties file stored in the <PRODUCT_HOME>/repository/conf/security folder. The file should contain information about the files in which the passwords (that require encryption) are located as shown below:
```
<alias>=<file_name>//<xpath>,<true/false>
```
  For example, if you want to encrypt the admin user password in the user-mgt.xml file, the following should be added to the cipher-tool.properties file:
```
UserManager.AdminUser.Password=repository/conf/user-mgt.xml//UserManager/Realm/Configuration/AdminUser/Password,false
```
  Either the relative path or the absolute path of each file starting from <PRODUCT_HOME> should be given. The last value that follows the file path is set to 'true' or 'false' indicating whether or note the value to be encrypted is an attribute.
  By default, the file that is shipped with your product pack will contain information on the most common passwords that require encryption.
2. Open the cipher-text.properties file stored in the <PRODUCT_HOME>/repository/conf/security folder. This file should contain the secret alias names and the corresponding plain text passwords (enclosed within square brackets) as shown below.
```
<alias>=[plain_text_password]
```
  For example, if you want to encrypt the admin user password in the user-mgt.xml file, the following should be added to the cipher-tool.properties file:
```
UserManager.AdminUser.Password=[admin]
```
Open a command prompt and go to the <PRODUCT_HOME>/bin directory, where the ciphertool.sh script is stored.
Run the ciphertool.sh script using the command prompt as shown below:
```
./ciphertool.sh -Dconfigure
```
The Cipher Tool reads the alias values and their corresponding plain text passwords from the cipher-text.properties file. Shown below is an example of an alias and the corresponding plain text password (in square brackets):
UserManager.AdminUser.Password=[admin]
If a password is not specified in the cipher-text.properties file for an alias, the user needs to provide it through the command-line. Check whether the alias is a known password alias in Carbon configurations. If the tool modifies the configuration element and file, you must replace the configuration element with the alias name. Define a Secret Callback in the configuration file and add proper name spaces for defining the Secure Vault.
When the above command is executed, the following message is prompted: "[Please Enter Primary KeyStore Password of Carbon Server : ]". Enter the keystore password (which is "wso2carbon" for the default keystore). If the script execution completed successfully, you will see the following message: "Secret Configurations are written to the property file successfully".
Now, to verify the password encryption:
- Open the cipher-text.properties file and see that the plain text passwords are replaced by a cipher value.
- Open the secret-conf.properties file from the <PRODUCT_HOME>/repository/conf/security/ folder and see that the default configurations are changed.

Encrypting passwords manually

This manual process of encrypting elements in configuration files is particularly important if you want to encrypt elements that cannot use an xpath to specify the location. In the automated process explained before, we updated the cipher-tool.properties file using an xpath. However, we cannot use xpath notations for certain configuration files. For example, consider the sample jndi.properties file shown below. This file is used in WSO2 Enterprise Service Bus (WSO2 ESB) for the purpose of connecting to a message broker. You can read more about this functionality from here.

As shown below, this file contains a password value (admin), which is the password used when WSO2 ESB connects to a message broker. To encrypt this password, you must manually encrypt the entire Queue Connection Factory value (amqp://admin:admin@clientID/carbon?brokerlist).

# register some connection factories
# connectionfactory.[jndiname] = [ConnectionURL]
connectionfactory.QueueConnectionFactory = amqp://admin:admin@clientID/carbon?brokerlist

# register some queues in JNDI using the form
# queue.[jndiName] = [physicalName]
queue.MyQueue = example.MyQueue

# register some topics in JNDI using the form
# topic.[jndiName] = [physicalName]
topic.MyTopic = example.MyTopic

Follow the steps given below.

Download and install WSO2 ESB.
Open a command prompt and navigate to the <PRODUCT_HOME>/bin folder.
Enable the Cipher Tool for WSO2 ESB by executing the following command:
```
sh ciphertool.sh -Dconfigure 
```
Execute the Cipher Tool using the following command:
```
sh ciphertool.sh
```
You will be asked to enter the primary key password, which is by default 'wso2carbon'. Enter the password and proceed.
You will now be asked to enter the plain text password that you want to encrypt. Enter the following element as the password and proceed:
```
Enter Plain Text Value :amqp://admin:admin@clientID/carbon?brokerlist
```

You will receive the encrypted value as shown below. For example:

Encrypted value is: 
gaMpTzAccMScaHllsZLXspm1i4HLI0M/srL5pB8jyknRKQ2zT7NuCvt1+qEkElRLgwlrohz3lkuE0KFuapXrCSs5pxfGMOLn4/k7dNs2SlwbsG8C++/
ZfUuft1Sl6cqvDRM55fQwzCPfybl713HvKu3oDaJ9VKgSbvHlQj6zqzg=

Open the cipher-text.properties file, stored in the <ESB_HOME>/repository/conf/security folder.

Add the encrypted password against the secret alias as shown below.

connectionfactory.QueueConnectionFactory=cpw74SGeBNgAVpryqj5/xshSyW5BDW9d1UW0xMZ
DxVeoa6RjyA1JRHutZ4SfzfSgSzy2GQJ/2jQIw70IeT5EQEAR8XLGaqlsE5IlNoe9dhyLiPXEPRGq4k/BgUQD
YiBg0nU7wRsR8YXrvf+ak8ulX2yGv0Sf8=

Now, open the jndi.properties file, stored in the <ESB_HOME>/repository/conf folder and replace the plain text element with the alias of the encrypted value as shown below.

# register some connection factories
# connectionfactory.[jndiname] = [ConnectionURL]
connectionfactory.QueueConnectionFactory=secretAlias:connectionfactory.QueueConnectionFactory

# register some queues in JNDI using the form
# queue.[jndiName] = [physicalName]
queue.MyQueue = example.MyQueue

# register some topics in JNDI using the form
# topic.[jndiName] = [physicalName]
topic.MyTopic = example.MyTopic

Changing encrypted passwords

To change any password which we have encrypted already, follow the below steps:

Be sure to shut down the server.
Open a command prompt and go to the <PRODUCT_HOME>/bin directory, where we have stored the ciphertool.sh script.
Execute the following command:
```
./ciphertool.sh -Dchange
```
It will prompt for the primary keystore password. Enter the keystore password (which is "wso2carbon" for the default keystore).
The alias values of all the passwords that you encrypted will now be shown in a numbered list.
The system will then prompt you to select the alias of the password which you want to change. Enter the list number of the password alias.
The system will then prompt you (twice) to enter the new password. Enter your new password.
The password should now be changed and encrypted.

If you have encrypted passwords as explained above, note that these passwords have to be decrypted again for the server to be usable. That is, the passwords have to be resolved by a system administrator during server startup. The Resolving Passwords topic explains how encrypted passwords are resolved.