This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Invoke the OAuth Introspection Endpoint

The OAuth Introspection endpoint is as follows:

https://localhost:9443/oauth2/introspect

Follow the sections given below to invoke the endpoint:

OAuth 2.0 Token Introspection defines a protocol that allows authorized protected resources to query the authorization server to determine the set of metadata for a given token that was presented to them by an OAuth Client. This metadata includes whether the token is currently active (or if it has expired or otherwise been revoked), what rights of access the token carries (usually conveyed through OAuth 2.0 scopes), and the authorization context in which the token was granted (including who authorized the token and which client it was issued to). Token introspection allows a protected resource to query this information regardless of whether it is carried in the token itself, allowing this method to be used along with or independently of structured token values.

The states and descriptions of authorization codes and access tokens are as follows.
  • Authorization codes:

    1. ACTIVE - Valid and yet to be exchanged for an access token.
    2. INACTIVE - Invalid and already being exchanged for an access token.
    3. EXPIRED - Invalid as it got expired before being exchanged to an access token. 
  • Access tokens:

    1. ACTIVE - Valid access token. Although the state is ACTIVE, the timestamp calculation may reveal it to be EXPIRED, but this happens only during the first access token request or token validation request after expiration.
    2. INACTIVE - Refreshed using refresh_token grant type before expiration. Also, this state is used in cases when users and user stores are deleted, user passwords are updated, etc.
    3. EXPIRED - Invalid and expired access token. Refresh token can still be valid though.
    4. REVOKED - Revoked access token. Refresh token also gets revoked along with access token. Access token could have been in ACTIVE or EXPIRED state while revoking.

Invoking the endpoint for the super tenant

Use the following cURL commands given in the following sections to invoke the OAuth introspection endpoint for the super tenant users.

  • For requests that require CLIENT_ID:CLIENT_SECRET, use the client ID and client secret of the OAuth service provider. For more information on creating an OAuth service provider, see Configuring Inbound Authentication for a Service Provider.
  • For requests that require USERNAME:PASSWORD, by default you can use credentials of any user with "/permission/admin/manage/identity/applicationmgt/view" permissions. To allow users with other permissions to send validation requests, edit the following property found under the <ResourceAccessControl> tag of the <IS_HOME>/repository/conf/identity/identity.xml file.  

    <Resource context="(.*)/oauth2/introspect(.*)" secured="true" http-method="all">
        <Permissions>/permission/admin/manage/identity/applicationmgt/view</Permissions>
    </Resource>
Get a valid token
Request
Request
curl -v -X POST --basic -u <CLIENT_ID>:<CLIENT_SECRET> -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials' https://localhost:9443/oauth2/token
Sample cURL
curl -v -X POST --basic -u rgfKVdnMQnJSSr_pKFTxj3apiwYa:BRebJ0aqfclQB9v7yZwhj0JfW0ga -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials' https://localhost:9443/oauth2/token
Response
{"token_type":"Bearer","expires_in":3600,"access_token":"fbc4e794-23db-3394-b1e5-f2c3e511d01f"}

Validate the token

Request
Request
curl -k -u <USERNAME>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/oauth2/introspect
Sample cURL
curl -k -u admin:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=fbc4e794-23db-3394-b1e5-f2c3e511d01f' https://localhost:9443/oauth2/introspect

You can pass the token type as an optional parameter in the request (e.g., token_type_hint=bearer ).

Response
{"exp":1464161608,"username":"admin@carbon.super","active":true,"token_type":"Bearer","client_id":"rgfKVdnMQnJSSr_pKFTxj3apiwYa","iat":1464158008}
Get a valid token with a scope
Request
Request
curl -v -X POST --basic -u <CLIENT_ID>:<CLIENT_SECRET> -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials&scope=test1 test2' https://localhost:9443/oauth2/token
Sample cURL
curl -v -X POST --basic -u rgfKVdnMQnJSSr_pKFTxj3apiwYa:BRebJ0aqfclQB9v7yZwhj0JfW0ga -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials&scope=test1 test2' https://localhost:9443/oauth2/token
Response
{"access_token":"34060588-dd4e-36a5-ad93-440cc77a1cfb","scope":"test1 test2","token_type":"Bearer","expires_in":3600}

Validate the token

Request
Request
curl -k -u <USERNAME>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/oauth2/introspect
Sample cURL
curl -k -u admin:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=334060588-dd4e-36a5-ad93-440cc77a1cfb' https://localhost:9443/oauth2/introspect
Response
{"exp":1464161560,"username":"admin@carbon.super","scope":"test1 test2","active":true,"token_type":"Bearer","client_id":"rgfKVdnMQnJSSr_pKFTxj3apiwYa","iat":1464157960}
Invalid token

If the token that you used is invalid, you get the following response:

{'active':false}
Empty token

If you leave the token parameter empty as shown below, you get the  following response :

Request
Request
curl -k -u <USERNAME>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=' https://localhost:9443/oauth2/introspect
Sample cURL
 curl -k -u admin:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=' https://localhost:9443/oauth2/introspect
Response
{'error': 'Invalid input'}

Invoking the endpoint for tenants

Use the following cURL commands given in the following sections to invoke the OAuth introspection endpoint for tenant users.

  • For requests that require CLIENT_ID:CLIENT_SECRET, use the client ID and client secret of the OAuth service provider. For more information on creating an OAuth service provider, see Configuring Inbound Authentication for a Service Provider .
  • For requests that require USERNAME@TENANT_DOMAIN:PASSWORD, by default you can use credentials of any user with "/permission/admin/manage/identity/applicationmgt/view" permissions.

Get a valid token
Request
Request
curl -v -X POST --basic -u <CLIENT_ID>:<CLIENT_SECRET> -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials' https://localhost:9443/oauth2/token
Sample cURL
curl -v -X POST --basic -u rgfKVdnMQnJSSr_pKFTxj3apiwYa:BRebJ0aqfclQB9v7yZwhj0JfW0ga -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials' https://localhost:9443/oauth2/token
Response
{"token_type":"Bearer","expires_in":3600,"access_token":"fbc4e794-23db-3394-b1e5-f2c3e511d01f"}

Validate the token

You can pass the token type as an optional parameter in the request (e.g., token_type_hint=bearer ).

Request

You can use any of the request formats given below:

Request
curl -k -u <USERNAME>@<TENAND_DOMAIN>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/t/<TENANT_DOMAIN>/oauth2/introspect

Or

Request
curl -v -k -H 'Authorization: Basic <BASE64ENCODED(USERNAME@TENAND_DOMAIN:PASSWORD)>' -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/t/<TENANT_DOMAIN>/oauth2/introspect
Sample cURL
curl -k -u admin@foo.com:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=fbc4e794-23db-3394-b1e5-f2c3e511d01f' https://localhost:9443/t/foo.com/oauth2/introspect



Response
{"active":true,"token_type":"Bearer","exp":1517922556,"iat":1517918956,"client_id":"okaN2IXAsLx5SBH9Los1C6zX1RIa","username":"admin@foo.com”}
Get a valid token with a scope
Request
Request
curl -v -X POST --basic -u <CLIENT_ID>:<CLIENT_SECRET> -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials&scope=test1 test2' https://localhost:9443/oauth2/token
Sample cURL
curl -v -X POST --basic -u rgfKVdnMQnJSSr_pKFTxj3apiwYa:BRebJ0aqfclQB9v7yZwhj0JfW0ga -H 'Content-Type: application/x-www-form-urlencoded;charset=UTF-8' -k -d 'grant_type=client_credentials&scope=test1 test2' https://localhost:9443/oauth2/token
Response
{"access_token":"34060588-dd4e-36a5-ad93-440cc77a1cfb","scope":"test1","token_type":"Bearer","expires_in":3600}

Validate the token

Request

You can use any of the request formats given below:

Request
curl -k -u <USERNAME>@<TENANT_DOMAIN>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/t/<TENANT_DOMAIN>/oauth2/introspect

Or

Request
curl -v -k -H 'Authorization: Basic <BASE64ENCODED(USERNAME@TENANT_DOMAIN:PASSWORD)>' -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=<ACCESS_TOKEN>' https://localhost:9443/t/<TENANT_DOMAIN>/oauth2/introspect
Sample cURL
curl -k -u admin@foo.com:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=334060588-dd4e-36a5-ad93-440cc77a1cfb' https://localhost:9443/t/foo.com/oauth2/introspect
Response
{"scope":"1 test","active":true,"token_type":"Bearer","exp":1517922663,"iat":1517919063,"client_id":"okaN2IXAsLx5SBH9Los1C6zX1RIa","username":"admin@foo.com"}
Invalid token
If the token that you used is invalid, you get the following response:


Response
{'active':false}
Empty token

If you leave the token parameter empty as shown below, you get the following response:

Request

Example:

Request
curl -k -u <USERNAME>@<TENANT_DOMAIN>:<PASSWORD> -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=' https://localhost:9443/t/<TENANT_DOMAIN>/oauth2/introspect
Sample cURL
 curl -k -u admin:admin -H 'Content-Type: application/x-www-form-urlencoded' -X POST --data 'token=' https://localhost:9443/oauth2/introspect
Response
{'error': 'Invalid input'}