Configuring Nginx Plus

Use the following steps to configure Nginx Plus as the load balancer for WSO2 products.

1. Install Nginx Plus in a server configured in your cluster.

2. Configure Nginx Plus to direct the HTTP requests to the two worker nodes via the HTTP 80 port using the http://as.wso2.com/<service>. To do this, create a VHost file (as.http.conf) in the /etc/nginx/conf.d/ directory and add the following configurations into it.

   upstream wso2.as.com {
           sticky cookie JSESSIONID;
           server xxx.xxx.xxx.xx3:9763;
           server xxx.xxx.xxx.xx4:9763;
   }
   
   server {
           listen 80;
           server_name as.wso2.com;
           location / {
                  proxy_set_header X-Forwarded-Host $host;
                  proxy_set_header X-Forwarded-Server $host;
                  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                  proxy_set_header Host $http_host;
                  proxy_read_timeout 5m;
                  proxy_send_timeout 5m;
                  proxy_pass http://wso2.as.com;
           }
   }

3. Configure Nginx Plus to direct the HTTPS requests to the two worker nodes via the HTTPS 443 port using https://as.wso2.com/<service>. To do this, create a VHost file (as.https.conf) in the /etc/nginx/conf.d/ directory and add the following configurations into it.

   upstream ssl.wso2.as.com {
   	sticky cookie JSESSIONID;
   	server xxx.xxx.xxx.xx3:9443;
   	server xxx.xxx.xxx.xx4:9443;
   }
   
   server {
   listen 443;
   	server_name as.wso2.com;
   	ssl on;
   	ssl_certificate /etc/nginx/ssl/wrk.crt;
   	ssl_certificate_key /etc/nginx/ssl/wrk.key;
   	location / {
                  proxy_set_header X-Forwarded-Host $host;
                  proxy_set_header X-Forwarded-Server $host;
                  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                  proxy_set_header Host $http_host;
                  proxy_read_timeout 5m;
                  proxy_send_timeout 5m;
   	    proxy_pass https://ssl.wso2.as.com;
       	}
   }

4. Configure Nginx Plus to access the Management Console as https://mgt.as.wso2.com/carbon via HTTPS 443 port. This is to direct requests to the manager node. To do this, create a VHost file (mgt.as.https.conf) in the /etc/nginx/conf.d/ directory and add the following configurations into it.

   server {
   	listen 443;
   	server_name mgt.as.wso2.com;
   	ssl on;
   	ssl_certificate /etc/nginx/ssl/mgt.crt;
   	ssl_certificate_key /etc/nginx/ssl/mgt.key;
   
   	location / {
                  proxy_set_header X-Forwarded-Host $host;
                  proxy_set_header X-Forwarded-Server $host;
                  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                  proxy_set_header Host $http_host;
                  proxy_read_timeout 5m;
                  proxy_send_timeout 5m;
   	    proxy_pass https://xxx.xxx.xxx.xx2:9443/;
       	}
   	error_log  /var/log/nginx/mgt-error.log ;
              access_log  /var/log/nginx/mgt-access.log;
   }

5. Restart the Nginx Plus server.
   $sudo service nginx restart


   Tip: You do not need to restart the server if you are simply making a modification to the VHost file. The following command should be sufficient in such cases.


   $sudo service nginx reload 

    

    

Create SSL certificates

Create SSL certificates for both the manager and worker nodes using the instructions that follow.

1. Create the Server Key.
   $sudo openssl genrsa -des3 -out server.key 1024
2. Certificate Signing Request.
   $sudo openssl req -new -key server.key -out server.csr
3. Remove the password.
   $sudo cp server.key server.key.org
$sudo openssl rsa -in server.key.org -out server.key
4. Sign your SSL Certificate.
   $sudo openssl x509 -req -days 365 -in server.csr -signkey server.key -out server.crt

While creating keys, enter the host name (as.wso2.com or mgt.as.wso2.com) as the common name.