An An endpoint is is a specific destination for a message. Endpoints Endpoints can be switched on and off as required. This is functionality allows endpoints to be temporarily deactivated to avoid performance issues that result from heavy traffic.
Switching on and off is available only for defined endpoints.
Info | ||
---|---|---|
| ||
The Defined Endpoints tab shows endpoints saved in synapse configuration. The Dynamic EndpointsEndpoint tab shows endpoints saved in registry. |
...
Anchor | ||||
---|---|---|---|---|
|
Follow the instructions below to enable statistics for an endpoint.1. Sign in. Enter your user name and password to log on to activate a defined endpoint by switching it on.
- Log into the ESB Management Console
...
2. Click on "Main" in the left menu to access the "Manage" menu.
3. In the "Manage" menu, click on "Endpoints" under "Service Bus."
4. The "Manage Endpoints" page appears.
5. Choose the "Defined Endpoints" tab.
6. Select the necessary endpoint from the list and click on the "Switch On" link in the "Action" column.
7. The statistics for the endpoint will be activated.
Switching Off Endpoint
1. Select the necessary endpoint from the list in the "Defined Endpoints" tab and click on the "Switch Off" link in the "Action" column.
...
- using your username and password.
- Click Endpoints in the Service Bus section of the Main tab to open the Manage Endpoints page.
- Click on the Defined Endpoints tab. Then click on the Switch On link of the endpoint you want to activate.
Switching off an endpoint
Use the following instructions to deactivate a currently active defined endpoint.
- Log into the ESB Management Console using your username and password.
- Click Endpoints in the Service Bus section of the Main tab to open the Manage Endpoints page as shown in the Switching on an endpoint section.
- In the Defined Endpoints tab, click on the Switch Off link of the required endpoint.
Excerpt | ||
---|---|---|
| ||
Instructions on how to switch on/off an endpoint in WSO2 ESB. |