Page Comparison

This topic provides instructions on how to configure Salesforce as the Identity Provider to provision users from WSO2 Identity Server. The service provider in this scenario is WSO2 Identity Server. When WSO2 IS is the service provider, it is configured as the resident Service Provider. Therefore, after completing this tutorial you can see the users you add using WSO2 Identity Server being created in Salesforce too.

...

1. Sign up as a Salesforce developer.
   1. Fill out the relevant information found in the following URL: https://developer.salesforce.com/signup
      
   2. Click Sign me up.
   3. You will receive a security token by email to confirm your new account. If you did not receive the email, you can reset it by following the steps given here.

2. Log in with your new credentials as a Salesforce developer: https://login.salesforce.com/
   

   Note
   title Note!
   This document is explained using the Salesforce lightning theme. If you are using the classic theme, follow the steps given below to switch to the lightning theme: Expand title Click here to find the steps on how to switch from the classic to the lightning theme. Click your username to expand the drop down. Click Switch to Lightning Experience. Click the settings icon on the top-right-hand corner, and click Set Up. Now you are navigated to the lightening lightning theme of Salesforce.

3. Click Allow to enable Salesforce to access your basic information. This message pops up only when you log in to Salesforce for the first time.

4. Once you are logged in, add a connected app. Follow instructions below on how to do this. Click here for a more information.

   Info
   title Why is the Connected App required?
   The Salesforce provisioning connector in WSO2 Identity Server sends data to Salesforce via the Salesforce REST APIs. These APIs are OAuth protected. Therefore, when sending data to Salesforce using these REST APIs, the Client ID and Client Secret needs to be sent to Salesforce for Salesforce to authorize the respective REST API call. This can be achieved by creating a Connected App, which uses the standard OAuth 2.0 protocol for authentication. Once the application is created the client ID and client secret that is unique to the application is shared with you. You need to configure the Identity Provider in WSO2 Identity Server with these values to successfully configure outbound provisioning with Salesforce.

   1. Expand Apps and click App Manager. 
      
   2. In the window that appears, click New Connected Apps that is on the top right corner.

   3. Fill in the form that appears with relevant details.
      The following table describes the form labels in detail.

      Form Label	Description	Sample Value
      Connected App Name	The name of the connected app.	IdentityServerProvisioning
      API Name	Enter the API name used when referring to your app from a program. The API name should match the name of the connected app. This defaults to a version of the name without spaces. Only letters, numbers, and underscores are allowed, so you must edit the default name if the original app name contains any other characters.	IdentityServerProvisioning
      Contact Email	The email address used by the connected app.	<Email_Address>
      Enable OAuth Settings	This section controls how your app communicates with Salesforce. Select the checkbox to enable OAuth settings to configure authentication settings.	Select the check-box.
      Callback URL	The Callback URL is used for redirection. This is typically the URL that a user’s browser is redirected to after successful authentication. Use the following value here: https://login.salesforce.com/services/oauth2/token	https://login.salesforce.com/ services/oauth2/token
      Selected OAuth Scopes	Choose Full access (full) from the Available OAuth Scopes and click the button under Add. This gives the necessary permissions when accessing this App. Info These scopes refer to permissions the user gives to the connected app while it is running. The OAuth token name is in parentheses. Full access (full) allows access to the logged-in user’s data, and encompasses all other scopes. Full doesn’t return a refresh token. You must explicitly request the refresh_token scope to get one.	Full access (full)

      

   4. Click Save > Continue to add the connected app.

5. Anchor
   Client-ID-KEY-Salesforce Client-ID-KEY-Salesforce

   The resulting screen displays key information that you will need to configure the Identity Server to Salesforce. 
   Make a note of the following details as you need them in upcoming configurations. 
   1. Consumer Key
   2. Consumer Secret (Click the Click to reveal link to view the consumer secret)
   3. Callback URL

   Info
   icon false
   Consumer Key : A value used by the consumer to identify itself to Salesforce. Referred to as client_id in OAuth 2.0. Consumer Secret: A secret used by the consumer to establish ownership of the consumer key. Referred to as client_secret in OAuth 2.0.

   

6. Add your connected app to the profile you are going to use. This is necessary as this profile is used when you add users in to into Salesforce from the Identity Server. 

   Note
   Allow from 2-10 minutes for your changes to take effect on the server before using the connected app.

   1. Expand Users and click Profiles. A list of existing profiles can be viewed.
      

   2. As an example, if you use the profile “Chatter Free User”, click Edit and select the connected app you created to configure with the Identity Server using the provided checkbox.
      Example:
      

   3. Click Save. Make a note of the profile ID (or address URL) of the Chatter Free User profile.

      Tip
      Tip: Copy the URL and decode it using a URL decoder. You get an output similar to what is shown below: https://wso2-is-sso-dev-ed.lightning.force.com/one/one.app#/setup/page?nodeId=EnhancedProfiles&address=/00e90000001aV2o?isdtp=p1&a:t=1509949702148 In this case 00e90000001aV2o is your profile ID.

7. Anchor
   Salesforce-Certificate Salesforce-Certificate

   Get the public certificate for Salesforce. Do the following in order to achieve this. 

   Info
   For more information on generating the certificate, see the Salesforce documentation.

   1. In the left navigation pane, Expand Security and click Certificate and Key Management or you can search for Certificate and Key Management in the Quick Find search box.
      
   2. Click Create Self-Signed Certificate.
   3. Enter the Label and a Unique Name and click Save. The certificate is generated.
      
   4. Click the Download Certificate button to download the certificate.

...

1. Start the WSO2 Identity Server if it is not started up already and log in using the email you configured in the realm as instructed above in step 3 of Configuring the Identity Server. 
2. On the Management Console, click on Add under Identity Providers.
3. In the form that appears, provide a name for your identity provider by filling in the Identity Provider Name. You can use "Salesforce.com" as an example, but this can be any name you choose. See Configuring an Identity Provider for information on registering and configuring an identity provider.

4. Upload the Salesforce public certificate that you generated and saved in step 7 under Configuring Salesforce.
   Do this by clicking the Choose File button next to Identity Provider Public Certificate.

   Info
   title Why is the certificate needed?
   The Identity Provider's public certificate is used for SSL communication, to verify the signed data that comes from the Identity Provider and to send encrypted data to the Identity Provider.

   

5. Expand the Claim Configuration section of the form, followed by the Basic Claim Configuration section, and select Define Custom Claim Dialect. 

   Info

   We are adding a claim map in order to provision the users claim values to salesforce when outbound provisioning users to salesforce via WSO2 Identity Server. Here, the Identity Provider Claim URI is the claim URI in Salesforce, which maps local claim URI in WSO2 Identity Server. Read more about Claim Management. For more information on configuring advanced claims, see Configuring Claims for an Identity Provider.

6. Click Add Claim Mapping and add the following claims.
   Local claims in WSO2 IS are unique URIs. These are mapped to the attributes required by salesforce to create a new profile. Therefore, in this step you are mapping the attributes required by Salesforce to a unique URI. Now, when creating a new profile/user WSO2 IS sends these values to the correct attribute of Salesforce.

   Identity Provider Claim URI	Local Claim URI
   Alias	http://wso2.org/claims/givenname
   Email	http://wso2.org/claims/emailaddress
   EmailEncodingKey	http://wso2.org/claims/otherphone
   LanguageLocaleKey	http://wso2.org/claims/dob
   LastName	http://wso2.org/claims/lastname
   LocaleSidKey	http://wso2.org/claims/primaryChallengeQuestion
   ProfileId	http://wso2.org/claims/role
   TimeZoneSidKey	http://wso2.org/claims/challengeQuestion1
   UserPermissionsCallCenterAutoLogin	http://wso2.org/claims/telephone
   UserPermissionsMarketingUser	http://wso2.org/claims/mobile
   UserPermissionsOfflineUser	http://wso2.org/claims/country
   Username	http://wso2.org/claims/emailaddress

   

7. Expand the Advanced Claim Configuration section.
8. Select the Claim URI you added from the Provisioning Claim Filter dropdown and click Add Claim.
   

9. For each Claim URI, enter a default value as shown in the following table. The default values are used when creating the role in Salesforce.
   For example, the alias, email, profile ID and all the values listed below are shown when a user is created.
   These are sample values to help you understand better about claim URI and its value types.

   Claim URI	Default Value
   Alias	Samuel
   Email	samuel@wso2.com
   EmailEncodingKey	UTF-8
   LanguageLocaleKey	en_US
   LastName	Gnaniah
   LocaleSidKey	en_US
   ProfileId	00e90000001aV2o The users that are added using WSO2 Identity Server are added to this profile in Salesforce. For more information on the context of profiles in Salesforce, see the Salesforce tutorial. Tip Tip: The ProfileId value refers to the ID of the profile you created in Salesforce (step 6 of Configuring Salesforce). If it is the Chatter Free User profile you created, navigate to the profile in Salesforce to find the profile ID. You can do this by clicking Profiles under Manage Users in Salesforce and clicking Chatter Free User. Copy the URL and decode it using a URL decoder. You get an output similar to what is shown below: https://wso2-is-sso-dev-ed.lightning.force.com/one/one.app#/setup/page?nodeId=EnhancedProfiles&address=/00e90000001aV2o?isdtp=p1&a:t=1509949702148 In this case 00e90000001aV2o is your profile ID. Similarly, enter your Profile ID.
   TimeZoneSidKey	America/Los_Angeles
   UserPermissionsCallCenterAutoLogin	false
   UserPermissionsMarketingUser	false
   UserPermissionsOfflineUser	false
   Username	samuel@wso2.com

   

10. Expand the Outbound Provisioning Connectors section followed by the Salesforce Provisioning Configuration section.
11. Do the following configurations for Salesforce provisioning. For more information on any of these fields, see Configuring Salesforce provisioning.
    1. Select Enable Connector to enable the Salesforce connector.
    2. Enter the API version. This is the version of the API you are using in Salesforce. 
       Follow the steps given below to get the API version:
       
       1. To obtain this, log into https://login.salesforce.com. 
       2. Search for API in the Quick Find search box and click API. 
       3. Generate any one of the WSDL's to check the version. You are navigated to page with XML syntaxes.
       4. On the top, it will mention as "Salesforce.com Enterprise Web Services API Version <VERSION>".  For example: Salesforce.com Enterprise Web Services API Version 41.0
       5. Enter this value for the API version in the following format: v<VERSION_NUMBER>. For example: v41.0.

    3. Enter the Domain. If you do not have a Salesforce domain, you need to create a domain by logging into https://login.salesforce.com. 

       Expand
       title Click here for more information on creating the domain on Salesforce.
       Insert excerpt Logging in to Salesforce with Facebook Logging in to Salesforce with Facebook nopanel true

       Info
       Search for My Domain using the Quick Find search box and click My Domain. You see the domain as follows: Your domain name is  <DOMAIN>-dev-ed.my.salesforce.com Make sure you enter the domain with an HTTPS prefix so that it resembles a URL:  https://<DOMAIN>-dev-ed.my.salesforce.com .

    4. Enter the Client ID. This is the Consumer Key obtained in step 5 when configuring Salesforce.

       Expand
       title Did not save the details? Click here for more information on getting the details.
       Search for App Manager using the Quick Find search box and click App Manager. Click the expand button for your Connected App and click View. You are navigated to the page that has the Client ID and Client Secret of the app under API (Enable OAuth Settings).

    5. Enter the Client Secret. This is the Consumer Secret obtained in step 5 when configuring Salesforce.
    6. Enter the Username. This is the Salesforce username.

    7. Enter the Password. This is the Salesforce password and must be entered along with the security token. So you would enter this in the following format: <password><security_token>
       For example, if your password is testpassword and your security token is 37f37f4433123, the value you would enter here is testpassword37f37f4433123.

       Tip

       Expand title Where can I get the security token? Log in to Salesforce: https://login.salesforce.com/ Click on your avatar and click My Settings. You are navigated to the Personal Information page. On the left navigation, click Reset My Security Token. Click Reset Security Token. An email is sent to you with the new security token. Check the email of the email address you configured for Salesforce.

12. Click Register.

...

1. In the Main menu under the Identity section, click Resident under Service Providers. 
2. Expand the Outbound Provisioning Configuration in the screen that appears.

3. Select the identity provider you configured from the drop down and click the button.
   

   Info
   If you enable Blocking, Identity Server will wait for the response from the Identity Provider to continue. If you enable  Enable Rules  and  and Blocking, blocking will block the provisioning till the rule completely evaluate and get the response back to the WSO2 IDP. Afterwards, you need to enable the the XACML policy. For more information, see Rule Based Provisioning

4. Click Update.

...