Adding and Scheduling Tasks

A task runs a piece of code triggered by a timer, allowing you to run scheduled jobs at specified intervals. A task can be scheduled in the following ways:

Using count and interval attributes to run the task a specified number of times at a given interval.
Giving the scheduled time as a cron style entry.
Making the task run only once after the ESB starts by using the once attribute.

Having deployed a task implementation to the ESB runtime (see Writing Tasks), you can use the ESB Management Console to add a task to the "Tasks" list and schedule various instances of the task. You can use either UI configuration or XML configuration to add and schedule tasks.

UI Configuration

Follow the instructions below to add and schedule a task in ESB Management Console.

1. Sign in. Enter your user name and password to log in to the ESB Management Console.

2. Click Main in the left menu to access the Manage menu.

3. In the Manage menu, click Scheduled Tasks under Service Bus.

4. The Scheduled Tasks page appears, where you can add, edit, and delete tasks.

5. Click Add Task.

6. The New Scheduled Task page appears. Enter the required details into the fields.

Task Name - Name of a scheduled task.
Task Group - The group name to grouping tasks. The group name synapse.simple.quartz belongs to ESB - Synapse. All available groups are displayed as a drop-down menu. If there are tasks belong to some other domains, for example WSO2 Mashups tasks, then those will be shown here as a separate group names.
Task Implementation - The implementation class of the task. To use the default task implementation that is available with the ESB (and therefore can be used without downloading any third-party libraries or custom JARs), specify org.apache.synapse.startup.tasks.MessageInjector. This class simply injects a specified message into the Synapse environment at ESB startup. For more information on writing custom task implementations, see Writing Tasks.
Trigger Type- Trigger type for the task. This can be selected as either "Simple" or "Cron."
- Simple Trigger - Defined by specifying a count and an interval, implying that the task will run a count number of times at specified intervals.
  - Count - The number of times the task will be executed.
  - Interval - The interval between consecutive executions of a task.
- Cron Trigger - Defined using a cron expression.
Pinned Servers - Provides a list of ESB server names, where this task should be started for the "Pinned Servers" value.

7. Click Load Task Properties to see the instance properties of the task implementation.

8. Use the instance properties fields as follows:

Property Name - The unique name of the task property.
Property Type- The type of property, either Literal or XML.
Property Value - The value of the property.
Action - Allows you to delete a property.

For more information on setting the properties for the default task implementation, see Examples and Injecting the message to a named sequence or proxy service below.

The org.apache.synapse.startup.tasks.MessageInjector implementation takes the following properties:

format - defines the format of the message similar to Address Endpoint formats: soap11, soap12, pox, get
message - you can provide an XML or literal value depending on message format.
Note

When you add a scheduled task, it is mandatory to provide a value for the message property. Therefore, even If you do not want to send a message body, you have to provide an empty payload as the value to avoid an exception being thrown.
soapAction - specify the SOAP Action to use when sending the message to the endpoint.
to - specify the endpoint address.
injectTo - specify whether to inject a message to a proxy service or sequence. This field takes values 'sequence' or 'proxy' and 'main' to inject to main sequence.
proxyName - if injectTo contains 'proxy' then the name of the proxy to inject the message to is specified here.
sequenceName - if injectTo contains 'sequence' then the name of the sequence to inject the message to is specified here.

9. Click Schedule to apply the settings.

XML Configuration

Follow the instructions below to add and schedule tasks using XML configuration.

1. Sign in. Enter your user name and password to log on to the ESB Management Console.

2. Click on "Main" in the left menu to access the "Manage" menu.

3. In the "Manage" menu, click on "Source View" under "Service Bus."

4. In the source view, add the task configuration based on your requirement.

The syntax of the task configuration is as follows:

<task class="string" name="string" [group="string"] [pinnedServers="(serverName)+"]>
       <property name="string" value="String"/>
       <property name="string"><somexml>config</somexml></property>
       <trigger ([[count="int"]? interval="int"] | [cron="string"] | [once=(true | false)])/>
</task>

Examples

Following are examples of configuring some common use cases. For an example of configuring a task with a simple trigger, see Sample 300: Introduction to Tasks with a Simple Trigger. To see a complete example of writing a new task and configuring it in the UI, see Writing Tasks Sample.

To run every 5 seconds continuously:

<task name="CheckPrice" class="org.wso2.esb.tutorial.tasks.PlaceStockOrderTask">
<trigger interval="5"/>
</task>

To run every 5 seconds for 10 times:

<task name="CheckPrice" class="org.wso2.esb.tutorial.tasks.PlaceStockOrderTask">
<trigger interval="5" count="10"/>
</task>

You can also give cron-style values. To run daily at 1:30 AM:

<task name="CheckPrice" class="org.wso2.esb.tutorial.tasks.PlaceStockOrderTask">
<trigger cron="30 1 * * * ?"/>
</task>

To run only once after ESB starts:

<task name="CheckPrice" class="org.wso2.esb.tutorial.tasks.PlaceStockOrderTask">
<trigger once="true"/>
</task>

Injecting the message to a named sequence or proxy service

By default, the message is sent to the Main sequence. To send it to a different sequence or to a proxy service, set the injectTo property to sequence or proxy, and then add the sequenceName or proxyName property to specify the name of the sequence or proxy service to use. For example:

Injecting to a sequence other than Main

<task name="SampleInjectToSequenceTask"
         class="org.apache.synapse.startup.tasks.MessageInjector"
         group="synapse.simple.quartz">
      <trigger count="2" interval="5"/>

      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"

                name="injectTo"
                value="sequence"/>

      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks" name="message">
         <m0:getQuote xmlns:m0="http://services.samples">
            <m0:request>
               <m0:symbol>IBM</m0:symbol>
            </m0:request>
         </m0:getQuote>
      </property>

      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"

                name="sequenceName"
                value="SampleSequence"/>

   </task>

Injecting to a proxy service

 <task name="SampleInjectToProxyTask"
         class="org.apache.synapse.startup.tasks.MessageInjector"
         group="synapse.simple.quartz">
      <trigger count="2" interval="5"/>
      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks" name="message">
         <m0:getQuote xmlns:m0="http://services.samples">
            <m0:request>
               <m0:symbol>IBM</m0:symbol>
            </m0:request>
         </m0:getQuote>
      </property>

      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"

                name="proxyName"
                value="SampleProxy"/>

      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"
                
                name="injectTo"
                value="proxy"/>

   </task>

Injecting messages to RESTful Endpoints

In order to use the Message Injector to inject a message to a RESTful endpint, we can specify the injector with the required payload and inject the message to sequence or proxy service as defined above. The sample below shows a RESTful message injection through a ProxyService.

Injecting to a sequence other than Main

<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns="http://ws.apache.org/ns/synapse">
   <registry provider="org.wso2.carbon.mediation.registry.WSO2Registry">
      <parameter name="cachableDuration">15000</parameter>
   </registry>
   <proxy name="SampleProxy"
          transports="https http"
          startOnLoad="true"
          trace="disable">
      <description/>
      <target>
         <inSequence>
            <property name="uri.var.city" expression="//request/location/city"/>
            <property name="uri.var.cc" expression="//request/location/country"/>
            <log>
               <property name="Which city?" expression="get-property('uri.var.city')"/>
               <property name="Which country?" expression="get-property('uri.var.cc')"/>
            </log>
            <send>
               <endpoint name="EP">
                  <http method="get"
                        uri-template="http://api.openweathermap.org/data/2.5/weather?q={uri.var.city},{uri.var.cc}"/>
               </endpoint>
            </send>
         </inSequence>
         <outSequence>
            <log level="full"/>
            <drop/>
         </outSequence>
      </target>
   </proxy>

   <task name="SampleInjectToProxyTask"
         class="org.apache.synapse.startup.tasks.MessageInjector"
         group="synapse.simple.quartz">
      <trigger count="2" interval="5"/>
      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"
                name="injectTo"
                value="proxy"/>
      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks" name="message">
         <request xmlns="">
            <location>
               <city>London</city>
               <country>UK</country>
            </location>
         </request>
      </property>
      <property xmlns:task="http://www.wso2.org/products/wso2commons/tasks"
                name="proxyName"
                value="SampleProxy"/>
   </task>
</definitions>