Analytics Solutions

Analytics Solutions refer to WSO2 SP solutions pre-designed to work with other WSO2 products. The following solutions are currently supported.

EI-Analytics
APIM-Analytics
IS-Analytics

At a given time, you can run one or more of these solutions in your WSO2 SP server. To specify the Analytics Solutions you want to configure, edit the <SP_HOME>/conf/worker/deployment.yaml file as follows:

Under the # Carbon Configuration Parameters comment and wso2.carbon section, add a new comment named #server type as shown below:
```
# Carbon Configuration Parameters
wso2.carbon:
  # server type
```
Under # server type, add a parameter named type. The value depends on the solutions you want to enable in your SP server. Possible values are as follows:
- wso2-sp : This allows you to enable multiple Analytics Solutions in your SP server. In addition, you can also deploy custom Siddhi applications and other custom SP artifacts to implement your own SP solutions.
- wso2-apim-analytics: This only allows you to run the APIM Analytics solution in your SP server. When this value is specified, all the artifacts related to the APIM Analytics Solution are deployed and you cannot deploy any other Siddhi application in the SP server.
- wso2-ei-analytics : This only allows you to run the EI Analytics solution in your SP server. When this value is specified, all the artifacts related to the EI Analytics Solution are deployed and you cannot deploy any other Siddhi application in the SP server.
- wso2-is-analytics: This only allows you to run the IS Analytics solution in your SP server. When this value is specified, all the artifacts related to the IS Analytics Solution are deployed and you cannot deploy any other Siddhi application in the SP server.
e.g., If you want to run multiple Analytics Solutions in your SP server, this parameter can be configured as follows:
```
# Carbon Configuration Parameters
wso2.carbon:
  # server type
  type: wso2-sp
```
To enable the required Analytics Solutions, add a new subsection under the # Carbon Configuration Parameters section named analytics.solutions, and enable the required solutions as shown in the example below:
```
# Carbon Configuration Parameters
wso2.carbon:
  # server type
  type: wso2-sp

analytics.solutions:
  IS-analytics.enabled: false
  APIM-analytics.enabled: true
  EI-analytics.enabled: true
```
In this example, only the APIM Analytics is enabled by setting the APIM-analytics.enabled: paramater to true.