This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

Usually, WSO2 Identity Server (IS) Security Token Service (STS) is secured using UsernameToken. By doing so, claims related to a particular user can be easily retrieved from a userstore.

However, there can be situations where STS is secured using non-repudiation, in which case the users are authenticated by signing the Request for Security Token (RST) using their private key. At the STS side, claims should be retrieved based on the user's X.509 certificate's Common Name (CN), if the STS trusts the user.

An extension point is used to address this scenario in WSO2 Identity Server. A custom attribute finder for non-repudiation scenario is written and given to IS to execute. This section discusses how to achieve this using WSO2 Identity Server and WSO2 Enterprise Service Bus. Additionally, an STS Sample is used which can be downloaded here. This sts-sample includes executables as well as the source files with an Eclipse project that was configured using Maven.

Use the following steps to run this scenario:

Configuring Key Stores

The following steps generate a key pair for the particular user you are interested in client's key store, and add his/her certificate to IS' key store.

You can use the key store of the sts-sample downloaded (which is located at sts-sample/src/main/resources/keystore/wso2carbon.jks), and you can test this with the "admin" user.

  1. Generate a new key pair in client's key store with the CN "admin" (or any other, if you want to test a different user in the IS user store).

    keytool -genkey -keyalg RSA -alias admin -keypass admin123 -keystore path/to/client/wso2carbon.jks -storepass wso2carbon -dname "CN=admin"
  2. Generate a certificate from the key pair.

    keytool -export -alias admin -file path/to/admin.cert -keystore path/to/client/wso2carbon.jks -storepass wso2carbon
  3. Import the new certificate to {IS_HOME}/repository/resources/security/wso2carbon.jks.

    keytool -import -alias admin -file path/to/admin.cert -keystore path/to/server/wso2carbon.jks -storepass wso2carbon
  4. When it asks "Trust this certificate? [no]:" at the end of above command, enter yes.

Running the Servers

In ESB, change the "Offset" value to 1 in {ESB_HOME}/repository/conf/carbon.xml. This allows you to run both IS and ESB servers parallelly. IS runs on the default port 9443 and ESB on 9444.

Start both servers by executing the following:

{IS_HOME}/bin/wso2server.sh and {ESB_HOME}/bin/wso2server.sh on Linux.

or

{IS_HOME}/bin/wso2server.bat and {ESB_HOME}/bin/wso2server.bat on Windows.

Securing an Echo Service (the Relying Party) in ESB

  1. Add a custom policy to the registry.
    1. Create a new collection (which is essentially a folder) to maintain custom policies.
       
    2. Add the service-policy.xml located at 'sts-sample/src/main/resources/' to this collection.
       
  2. Secure the echo service with the custom policy.
    1. Go to the Services list and click the Unsecured link of the echo service.
       
    2. Select Yes in the "Enable Security?" option.
    3. Give the path of the policy file we uploaded to registry, in the Policy From Registry section at the end of the page.
    4. Click Next.
    5. In the following page, select wso2carbon.jks as the Trusted Key Store.
       

The end service is successfully configured now.

Add ESB's Echo Service as a Trusted Service of STS

  1. Start the WSO2 Identity Server.
  2. Log in as an admin to access the management console
  3. Navigate to the Service Providers section by clicking Add in the Main menu under Service Providers.
  4. Add a Service Provider Name and Description and click Register.
  5. In the resulting page, expand the Inbound Authentication Configuration and the WS-Trust Security Token Service Configuration sections. Click Configure.
  6. Enter the trusted relying parties and upload the public certificate of the trusted relying party (against its end-point).

    Endpoint Address = http://localhost:8281/services/echo

    Certificate Alias = wso2carbon

     

    These relying parties will accept security tokens from the Identity Server. The tokens issued are encrypted using the public key of the trusted relying party. Accordingly, even the client who obtains the token to send to the RP has no visibility to the included token.

  7. Click Apply.

Secure STS with Non-repudiation

  1. Click Apply on the above screen.
  2. Select "Yes" in the "Enable Security?" option.
  3. Select scenario 2 - Non-repudiation, and click Next
  4. On the following page, as we did for ESB, select 'wso2carbon.jks' as the Trusted Key Store.
  5. Change the path.policy.sts property to sts-policy-signonly.xml in the client.properties file (refer code below) and save the file. (File path -> sts-client/src/main/resources/client.properties) 

    #Following paths start from the resources folder
    path.policy.sts=sts-policy-signonly.xml

Ensure Necessary Claims are Added to the User

  1. The echo service requires first name and the email address as the claims (refer service-policy.xml).
  2. Check the user profile of the particular user ("admin" in default case) to make sure the values for those claims are available.
     

Both ESB and IS are now configured.

Testing with the STS Client

The following are the (partially clipped) sources that make up the Client.

Client.java can invoke token issue binding on STS, as well as send the request to the echo service.

public class Client {
 
    ...
     
    public static void main(String[] args) {
        Client client = new Client();
        client.run();
    }
 
    private void run() {
        try {
            loadConfigurations();
 
            // set the trust store as a system property for communication over
            // TLS.
            System.setProperty("javax.net.ssl.trustStore", keystorePath);
            System.setProperty("javax.net.ssl.trustStorePassword", keystorePwd);
 
            // create configuration context
            ConfigurationContext configCtx = ConfigurationContextFactory
                    .createConfigurationContextFromFileSystem(repoPath);
 
            // create STS client
            STSClient stsClient = new STSClient(configCtx);
            stsClient.setRstTemplate(getRSTTemplate());
 
            String action = null;
            String responseTokenID = null;
 
            action = TrustUtil.getActionValue(RahasConstants.VERSION_05_02,
                    RahasConstants.RST_ACTION_ISSUE);
            stsClient.setAction(action);
 
            // request the security token from STS.
            Token responseToken;
             
            Policy stsPolicy = loadPolicy(stsPolicyPath);
 
            // add rampart config assertion to the ws-sec policies
            RampartConfig rampartConfig = buildRampartConfig();
            stsPolicy.addAssertion(rampartConfig);
             
            responseToken = stsClient.requestSecurityToken(null, stsEPR, stsPolicy, relyingPartyEPR);
 
            // store the obtained token in token store to be used in future
            // communication.
            TokenStorage store = TrustUtil.getTokenStore(configCtx);
            responseTokenID = responseToken.getId();
            store.add(responseToken);
 
            // print token
            System.out.println(responseToken.getToken().toString());
 
            ...
 
            //Send the token to relying party
            if (enableRelyingParty) {
                /* Invoke secured service using the obtained token */
                OMElement responseElem = null;
 
                // create service client
                ServiceClient serClient = new ServiceClient(configCtx, null);
 
                // engage modules
                serClient.engageModule("addressing");
                serClient.engageModule("rampart");
 
                // load policy of secured service
                Policy sec_policy = loadPolicy(relyingPartyPolicyPath);
 
                // add rampart config to the ws-sec policies
                sec_policy.addAssertion(rampartConfig);
 
                // set in/out security policies in client opts
                serClient.getOptions().setProperty(RampartMessageData.KEY_RAMPART_POLICY,
                        sec_policy);
 
                // Set the token id as a property in the Axis2 client scope, so that
                // this will be picked up when creating the secure message to invoke
                // the endpoint.
                serClient.getOptions().setProperty(RampartMessageData.KEY_CUSTOM_ISSUED_TOKEN,
                        responseTokenID);
 
                // set action of the Hello Service to be invoked.
                serClient.getOptions().setAction("urn:echoString");
                serClient.getOptions().setTo(new EndpointReference(relyingPartyEPR));
 
                // invoke the service
                responseElem = serClient.sendReceive(getPayload(echoRequestMsg));
                // cleanup transports
                serClient.getOptions().setCallTransportCleanup(true);
 
                System.out.println(responseElem.toString());
                 
                System.exit(0);
            }
        } catch (IOException e) {
            e.printStackTrace();
        } catch (TrustException e) {
            e.printStackTrace();
        } catch (XMLStreamException e) {
            e.printStackTrace();
        }
    }
 
    private OMElement getRSTTemplate() throws TrustException {
        OMFactory omFac = OMAbstractFactory.getOMFactory();
        OMElement element = omFac.createOMElement(SP11Constants.REQUEST_SECURITY_TOKEN_TEMPLATE);
 
        if (ClientConstants.SAML_TOKEN_TYPE_20.equals(tokenType)) {
            TrustUtil.createTokenTypeElement(RahasConstants.VERSION_05_02, element).setText(
                    RahasConstants.TOK_TYPE_SAML_20);
        } else if (ClientConstants.SAML_TOKEN_TYPE_11.equals(tokenType)) {
            TrustUtil.createTokenTypeElement(RahasConstants.VERSION_05_02, element).setText(
                    RahasConstants.TOK_TYPE_SAML_10);
        }
 
        if (ClientConstants.SUBJECT_CONFIRMATION_BEARER.equals(subjectConfirmationMethod)) {
            TrustUtil.createKeyTypeElement(RahasConstants.VERSION_05_02, element,
                    RahasConstants.KEY_TYPE_BEARER);
        } else if (ClientConstants.SUBJECT_CONFIRMATION_HOLDER_OF_KEY
                .equals(subjectConfirmationMethod)) {
            TrustUtil.createKeyTypeElement(RahasConstants.VERSION_05_02, element,
                    RahasConstants.KEY_TYPE_SYMM_KEY);
        }
 
        // request claims in the token.
        OMElement claimElement = TrustUtil.createClaims(RahasConstants.VERSION_05_02, element,claimDialect);
        // Populate the <Claims/> element with the <ClaimType/> elements
        addClaimType(claimElement, claimUris);
 
        return element;
    }
 
    private void addClaimType(OMElement parent, String[] claimUris) {
        OMElement element = null;
        // For each and every claim uri, create an <ClaimType/> elem
        for (String attr : claimUris) {
            element = parent.getOMFactory()
                    .createOMElement(
                            new QName("http://schemas.xmlsoap.org/ws/2005/05/identity",
                                    "ClaimType", "wsid"), parent);
            element.addAttribute(parent.getOMFactory().createOMAttribute("Uri", null, attr));
        }
    }
 
    private Policy loadPolicy(String policyPath) throws XMLStreamException, FileNotFoundException {
        StAXOMBuilder omBuilder = new StAXOMBuilder(policyPath);
        return PolicyEngine.getPolicy(omBuilder.getDocumentElement());
    }
 
    private RampartConfig buildRampartConfig() {
        RampartConfig rampartConfig = new RampartConfig();
        rampartConfig.setUser(username);
        rampartConfig.setEncryptionUser(encryptionUser);
        rampartConfig.setUserCertAlias(userCertAlias);
        rampartConfig.setPwCbClass(pwdCallbackClass);
 
        Properties cryptoProperties = new Properties();
        cryptoProperties.put("org.apache.ws.security.crypto.merlin.keystore.type", "JKS");
        cryptoProperties.put("org.apache.ws.security.crypto.merlin.file", keystorePath);
        cryptoProperties
                .put("org.apache.ws.security.crypto.merlin.keystore.password", keystorePwd);
 
        CryptoConfig cryptoConfig = new CryptoConfig();
        cryptoConfig.setProvider("org.apache.ws.security.components.crypto.Merlin");
        cryptoConfig.setProp(cryptoProperties);
 
        rampartConfig.setEncrCryptoConfig(cryptoConfig);
        rampartConfig.setSigCryptoConfig(cryptoConfig);
 
        return rampartConfig;
    }
 
    private OMElement getPayload(String value) {
        OMFactory factory = null;
        OMNamespace ns = null;
        OMElement elem = null;
        OMElement childElem = null;
 
        factory = OMAbstractFactory.getOMFactory();
        ns = factory.createOMNamespace("http://echo.services.core.carbon.wso2.org", "ns");
        elem = factory.createOMElement("echoString", ns);
        childElem = factory.createOMElement("in", null);
        childElem.setText(value);
        elem.addChild(childElem);
 
        return elem;
    }
     
    ...
}

PasswordCBHandler.java is used by the underlying Rampart module to get the password of the key alias which is used to sign the request.

public class PasswordCBHandler implements CallbackHandler{
     
    ...
     
    public void handle(Callback[] callbacks) throws IOException, UnsupportedCallbackException {
 
        readUsernamePasswordFromProperties();
         
        WSPasswordCallback pwcb = (WSPasswordCallback) callbacks[0];
        String id = pwcb.getIdentifier();
        int usage = pwcb.getUsage();
 
        if (usage == WSPasswordCallback.USERNAME_TOKEN) {
 
           if (username.equals(id)) {
               pwcb.setPassword(password);
           }
        } else if (usage == WSPasswordCallback.SIGNATURE || usage == WSPasswordCallback.DECRYPT) {
 
            if (keyAlias.equals(id)) {
                pwcb.setPassword(keyPassword);
            }
        }
    }
     
    ...
}

You can configure the client by using the 'sts-sample/src/main/resources/client.properties' file. By default, it is configured to run the client in SAML2 and 'Bearer' subject confirmation modes using "admin" as the user.

There are scripts named sts-client.sh and sts-client.bat included in the sts-sample download. By using them, you can directly run the client without much hassle.

Upon execution, you can see an output on your console.

 

  • No labels