Unknown macro: {next_previous_links}
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »

Token API comes bundled with the API Manager by default and is u sed to generate and renew user and application access tokens. Users need access tokens to invoke APIs subscribed under an application. Access tokens are passed in the HTTP header when invoking APIs. The Token API

Let's take a look at how to generate/renew access tokens and authorize them. WSO2 API Manager supports the four most common authorization grant types and you can also define additional types such as SAML.

Generating access tokens with user credentials (password grant type)

You can obtain an access token by providing the resource owner's username and password as an authorization grant. It requires the base64 encoded string of the comsumer-key:consumer-secret combination. You need to meet the following prerequisites before using the Token API to generate a token.

Prerequisites

  • A valid user account in the API Store. See Signing up to API Store.
  • A valid consumer key and consumer secret pair. Initially, these keys must be generated through the management console by clicking the Generate link on My Subscriptions page. You can find more details in Working with Access Tokens.
  • A running API Gateway instance (typically an API Manager instance should be running). For instructions on API Gateway, see Architecture.  

  • If you have multiple Carbon servers (such as API Manager and WSO2 Application Server) running on the same computer, you must change the port offset to avoid port conflicts. Setting the port offset causes API Manager to run on a different port from the default. Therefore, when you change the port offset, you must also update the port for the endpoint defined inside the Send mediator of the token API in <APIM_HOME>/repository/deployment/server/synapse-configs/default/api/_TokenAPI_.xml. For example, if you set the port offset to 1, and the default port is 9443, you must change the port in the endpoint to 9444, as follows:

    <send>
  <endpoint>
    <address uri="https://localhost:9444/oauth2/token"/>
  </endpoint>
</send>

    If you have upgraded from a previous release of API Manager, you should also update the endpoint in the deprecated API file _LoginAPI_.xml

  • If the Key Manager is running on a different server from the API Gateway instance, change the host and port of the token API endpoint (see above) to the correct address of the Key Manager.

Invoking the Token API to generate tokens   

  1. Combine the consumer key and consumer secret keys in the format consumer-key:consumer-secret and encode the combined string using base64. Encoding to base64 can be done using the URL: http://base64encode.org.
    Here's an example consumer key and secret combination : wU62DjlyDBnq87GlBwplfqvmAbAa:ksdSdoefDDP7wpaElfqvmjDue.
  2. Access the Token API by using a REST client such as the WSO2 REST Client or Curl, with the following parameters.
    • Assuming that both the client and the API Gateway are run on the same server, the token API url is https://localhost:8243/token
    • payload - "grant_type=password&username=<username>&password=<password>&scope=PRODUCTION". Replace the <username> and <password> values as appropriate.
    • headers - Authorization: Basic <base64 encoded string>, Content-Type: application/x-www-form-urlencoded. Replace the <base64 encoded string> as appropriate.          

    For example, use the following cURL command to access the Token API. It generates two tokens as an access token and a refresh token. You can use the refresh token at the time a token is renewed .

    curl -k -d "grant_type=password&username=<username>&password=<password>&scope=PRODUCTION" -H "Authorization: Basic SVpzSWk2SERiQjVlOFZLZFpBblVpX2ZaM2Y4YTpHbTBiSjZvV1Y4ZkM1T1FMTGxDNmpzbEFDVzhh, Content-Type: application/x-www-form-urlencoded" https://localhost:8243/token

    The Token API endpoint is specified in <APIM_HOME>/repository/deployment/server/synapse-configs/default/api/_TokenAPI_.xml file. When running the server on a different port from the default (i.e., 9443), or if your Key Manager is running on a different machine from your API Gateway, you must update the endpoint inside the _TokenAPI_.xml file as described in the prerequisites.

    User access tokens have a fixed expiration time, which is set to 60 minutes by default. Before deploying the API manager to users, extend the default expiration time by editing the <AccessTokenDefaultValidityPeriod> tag in <PRODUCT_HOME>/repository/conf/identity.xml.

    When a user access token expires, the user can try regenerating the token as explained in the Renew user tokens section.

Instead of using the Token API, you can generate access tokens from the API Store UI. See Working with Access Tokens for information.

Generating access tokens with authorization code (authorization code grant type)

Instead of requesting authorization directly from the resource owner (resource owner's credentials), in this grant type, the client directs the resource owner to an authorization server. The authorization server works as an intermediary between the client and resource owner to issues an authorization code, authenticate the resource owner and obtain authorization. As this is a redirection-based flow, the client must be capable of interacting with the resource owner's user-agent (typically a Web browser) and receiving incoming requests (via redirection) from the authorization server.

The client initiates the flow by directing the resource owner's user-agent to the authorization endpoint (you can use the /authorize endpoint for the authorization code grant type of OAuth2.0). It includes the client identifier, response_type, requested scope, and a redirection URI to which the authorization server sends the user-agent back after granting access. The authorization server authenticates the resource owner (via the user-agent) and establishes whether the resource owner granted or denied the client's access request. Assuming the resource owner grants access, the authorization server then redirects the user-agent back to the client using the redirection URI provided earlier. The redirection URI includes an authorization code.

The client then requests an access token from the authorization server's /token endpoint by including the authorization code received in the previous step. When making the request, the client authenticates with the authorization server. It then includes the redirection URI used to obtain the authorization code for verification. The authorization server authenticates the client, validates the authorization code, and ensures that the redirection URI matches the URI used to redirect the client from the /authorize endpoint in the previous response. If valid, the authorization server responds back with an access token and, optionally, a refresh token.

Invoking the Token API to generate tokens

Assuming that both the client and the API Gateway are run on the same server, the Authorization API url is https://localhost:8243/authorize.

  • query component - response_type=code&client_id=<consumer_key>&scope=PRODUCTION&redirect_uri=<application_callback_url>
  • headers - Content-Type: application/x-www-form-urlencoded

For example, the client directs the user-agent to make the following HTTP request using TLS.

GET
/authorize?response_type=code&client_id=wU62DjlyDBnq87GlBwplfqvmAbAa&scope=PRODUCTION&redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb
HTTP/1.1 
Host: server.example.com 
Content-Type:
application/x-www-form-urlencoded

The authorization server redirects the user-agent by sending the following HTTP response:

HTTP/1.1 302 Found 
Location:
https://client.example.com/cb?code=SplxlOBeZQQYbYS6WxSbIA

Now the client makes the following HTTP request using TLS to the /token endpoint.

POST /token HTTP/1.1 
Host: server.example.com 
Authorization: Basic
SVpzSWk2SERiQjVlOFZLZFpBblVpX2ZaM2Y4YTpHbTBiSjZvV1Y4ZkM1T1FMTGxDNmpzbEFDVzhh
Content-Type:
application/x-www-form-urlencoded 
grant_type=authorization_code&code=SplxlOBeZQQYbYS6WxSbIA&redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

The /token endpoint responds in the same way like in password grant type.

Exchanging SAML2 bearer tokens with OAuth2 (SAML extension grant type)

SAML 2.0 is an XML-based protocol. It uses security tokens containing assertions to pass information about an enduser between a SAML authority and a SAML consumer. A SAML authority is an identity provider (IDP) and a SAML consumer is a service provider (SP).

A lot of enterprise applications use SAML2 to engage a third-party identity provider to grant access to systems that are only authenticated against the enterprise application. These enterprise applications might need to consume OAuth-protected resources through APIs, after validating them against an OAuth2.0 authentication server. However, an enterprise application that already has a working SAML2.0 based SSO infrastructure between itself and the IDP prefers to use the existing trust relationship, even if the OAuth authorization server is entirely different from the IDP. The SAML2 Bearer Assertion Profile for OAuth2.0 helps leverage this existing trust relationship by presenting the SAML2.0 token to the authorization server and exchanging it to an OAuth2.0 access token.

WSO2 API Manager provides SAML2 Bearer Assertion Profile Support with the OAuth 2.0 feature. WSO2 Identity Server (version 4.5.0 onwards) or any other SAML2 Identity provider can act as an identity service provider for the systems enabled with SSO. WSO2 API Manager acts as the OAuth authorization server. This way, an enterprise application can exchange the SAML2.0 bearer token that it retrieves when authenticating against an IDP (e.g., WSO2 Identity Server) with an OAuth2.0 access token from an OAuth authorization server (e.g., WSO2 API Manager). It can then use the OAuth2 token in API invocations.

The diagram below depicts this scenario:

   
The scenarios of the above diagram are explained below:

Scenario [1]: User initiates login call to an enterprise application .

Scenario [2]:

  • As the application is a SAML SP, it redirects the user to the SAML2.0 IDP to log in.
  • The user provides credentials at the IDP and is redirected back to SP with a SAML2.0 token signed by the IDP.
  • The SP verifies the token and logs the user to the application.
  • The SAML 2.0 token is stored in the user's session by the SP.  

Scenario [3]:

  • The enterprise application (SP) wants to access an OAuth2 protected API resource through WSO2 API Manager.
  • The application makes a request to the API Manager to exchange the SAML2 bearer token for an OAuth2.0 access token.
  • The API Manager validates the assertion and returns the access token.

Scenario [4]: User does API invocations through the API Manager by setting it as an Authorization header with the returned OAuth2 access token.

Let's see how to configure the token exchange.

Prerequisites

  • A signed SAML2 token (encoded assertion value), which you retrieve when authenticating against a SAML2 IDP. With the authentication request, you must pass attributes such as SAML2 issuer name, token endpoint and the restricted audience. To specify those attributes,

    • Log in to the management console (https://localhost:9443/carbon) using admin/admin credentials and select Trusted Identity Providers sub menu from the Main menu.

    • Provide the following values in the page that opens:
      • Identity Provider Name: Enter a unique name for idP
      • Identity Provider Entity Id: The SAML2 issuer name specified when generating assertion token, which contains the unique identifier of the IDP
      • Identity Provider Public Certificate:   Upload Identity Provider public certificate
      • Token Endpoint Alias:
  • A valid user account in the API Store. See Signing up to API Store.
  • A valid consumer key and consumer secret. Initially, these keys must be generated through the management console by clicking the Generate link on My Subscriptions page. For more information, see Working with Access Tokens.
  • A running API Gateway instance. See information on API Gateway in Architecture.
  • If you have multiple Carbon servers (such as WSO2 API Manager and WSO2 Application Server) running on the same machine, you must change the port offset and update the token API endpoint. Additionally, if the key server is on a different server from the API Gateway, you must update the token API endpoint to use the correct host and port. For more information, see this prerequisite in the previous section.

Invoking Token API to generate tokens   

Follow the steps below to invoke Token API to generate access tokens from SAML2 assertions.

  1. Combine the consumer key and consumer secret keys as consumer-key:consumer-secret and encode the combined string using base64 using http://base64encode.org. Here's an example consumer key and secret combination: wU62DjlyDBnq87GlBwplfqvmAbAa:ksdSdoefDDP7wpaElfqvmjDue.
  2. Access the Token API using a REST client such as the WSO2 REST Client or Curl. The parameters are explained below:

    • Assuming that both the client and the API Gateway run on the same server, the Token API URL is https://localhost:8243/token.
    • payload - "grant_type=urn:ietf:params:oauth:grant-type:saml2-bearer&assertion=<SAML2_Encoded_Assertion_Token> &scope=PRODUCTION". Replace the <SAML2_Encoded_Assertion_Token> value as appropriate.
    • headers - Authorization :Basic <base64 encoded string>, Content-Type: application/x-www-form-urlencoded. Replace the <base64 encoded string> as appropriate.

    For example, use the following cURL command used to access the Token API generates an access token and a refresh token. You can use the refresh token at the time a token is renewed. 

    curl -k -d "grant_type=urn:ietf:params:oauth:grant-type:saml2-bearer&assertion=<SAML2_Encoded Assertion>&scope=PRODUCTION" -H "Authorization: Basic SVpzSWk2SERiQjVlOFZLZFpBblVpX2ZaM2Y4YTpHbTBiSjZvV1Y4ZkM1T1FMTGxDNmpzbEFDVzhh, Content-Type: application/x-www-form-urlencoded" https://localhost:8243/token

    The Token API endpoint is specified in <APIM_HOME>/repository/deployment/server/synapse-configs/default/api/_TokenAPI_.xml file. When running the server on a different port from the default (i.e., 9443), or if your Key Manager is running on a different server from your API Gateway, you must update the endpoint inside the _TokenAPI_.xml file as described here.

Renewing access tokens

After an access token is generated, sometimes you might have to refresh or renew the old token due to expiration or security concerns. This can be done by issuing a REST call to the Token API through a REST client such as the WSO2 REST Client or Curl, with the following parameters.

  • Assuming that both the client and the API Gateway are run on the same server, the Token API URL is https://localhost:8243/token.
  • payload - "grant_type=refresh_token&refresh_token=<retoken>&scope=PRODUCTION". Replace the <retoken> value with the refresh token generated in the previous section .
  • headers - Authorization :Basic <base64 encoded string>, Content-Type: application/x-www-form-urlencoded. Replace <base64 encoded string> as appropriate.          

For example, the following cURL command can be used to access the Token API.

curl -k -d "grant_type=refresh_token&refresh_token=<retoken>&scope=PRODUCTION" -H "Authorization: Basic SVpzSWk2SERiQjVlOFZLZFpBblVpX2ZaM2Y4YTpHbTBiSjZvV1Y4ZkM1T1FMTGxDNmpzbEFDVzhh, Content-Type: application/x-www-form-urlencoded" https://localhost:8243/token

The REST message will grant a renewed token.

Revoking access tokens

After issuing an access token, a user or an admin can revoke it in case of theft or a security violation. You can do this by calling Revoke API using a utility like cURL. The Revoke API's endpoint URL is http://localhost:8280/revoke.

Parameters required to invoke this API are as follows:

  • The token to be revoked
  • Consumer key and consumer secret key. Must be encoded using Base64 algorithm

For example, curl -k -d "token=<ACCESS_TOKEN_TO_BE_REVOKED>" -H "Authorization: Basic Base64Encoded(Consumer key:consumer secret)" http://localhost:8280/revoke

  • No labels
Unknown macro: {next_previous_links2}