Configuring the Tenant Loading Policy

In WSO2 products based on Carbon 4.4.0 or later versions, you have the option of setting the required tenant loading policy by enabling either Lazy Loading or Eager Loading of tenants. Additionally, you can separately control the loading policy for web applications and axis2 services deployed in your tenants using the GhostDeployment setting.

First, read the following descriptions to understand how Lazy loading and Eager loading work:

Lazy Loading: Lazy loading of tenants ensures that all tenants are not loaded at the time the server starts. Instead, the tenants are loaded only when a request is made to a particular tenant. By default, lazy loading is enabled for tenants in all WSO2 products, but not for some artifacts (web applications and axis2 services) deployed for your tenants. Therefore, if you have these artifacts deployed in your tenants, you will need to separately enable lazy loading for artifacts using the GhostDeployment setting. See Configuring Lazy Loading for instructions.
If lazy loading is not enabled for artifacts, by default, these artifacts will comply with the Eager loading behavior that is explained below.
Eager Loading: Unlike lazy loading, eager loading ensures that tenants will be initialized when the server starts (without any delays). As explained above, Lazy loading is the default tenant loading policy in WSO2 products, and you can switch to Eager loading if required. Note that you also have the option of enabling Eager loading for specific tenants so that only the required tenants will be loaded when the server starts. If you have web applications and axis2 services deployed for your tenants, you will want these artifacts to behave according to the Eager loading policy. Therefore, it is recommended that you disable lazy loading for artifacts when Eager loading is enabled. See Configuring Eager Loading for instructions.

Tenant unloading:

If a tenant is not utilized for a certain period of time (allowed idle time), it will be unloaded from memory. Therefore, the associated performance improvement and resource utilization efficiencies are optimal. You can configure the allowed idle time for your tenants.

Now, see the instructions given below to configure the required tenant loading policy for your system.

Configuring Lazy Loading

As explained above, Lazy Loading (for tenants) is enabled as the loading policy in WSO2 products, by default. To verify that Lazy loading is enabled, open the carbon.xml file (stored in the <PRODUCT_HOME>/repository/conf directory) and see that <LazyLoading> is uncommented as shown below.

<Tenant>
   		 <LoadingPolicy>
      	 	<LazyLoading>
           		 	<IdleTime>30</IdleTime>
       		 </LazyLoading>
       	 <!--<EagerLoading>
           			<Include>*,!foo.com,!bar.com</Include>
       		 </EagerLoading>-->
  		</LoadingPolicy>
</Tenant>

Enabling lazy loading of artifacts (web applications and axis2 services)

If you have lazy loading enabled, and if you have web applications and axis2 services deployed as artifacts in your tenants, you need to separately enable lazy loading for artifacts. This will ensure that these artifacts are first loaded in ghost form. The actual artifacts are deployed only when the artifact is requested.

Before you enable lazy loading of artifacts, note the following:

This setting is only applicable to the following artifacts: web applications and axis2 services.
This setting only applies if the artifacts (web applications and axis2 services) are using the HTTP/S transport. However, sometimes your axis2 services may be using other transport types such as JMS. In such situations, it is not recommended to enable lazy loading for your artifacts.
When this setting is enabled for PaaS deployments, lazy loading applies for tenants as well as the tenant artifacts. As a result, for a tenant in a cloud environment, lazy loading is applicable on both levels.
Also, if an artifact has not been utilized for a certain period of time (tenant idle time), it will be unloaded from memory.

Follow the steps given below.

Open the carbon.xml file (stored in the <PRODUCT_HOME>/repository/conf directory).
```
<GhostDeployment>
   <Enabled>false</Enabled>
</GhostDeployment>
```
Set the <Enabled> property to true.

Configuring the tenant unloading time (for Lazy Loading)

If you have Lazy loading enabled, you can configure the allowed tenant idle time. For example, if you set the idle time to 30 minutes, tenants that are idle for more than 30 minutes will be unloaded automatically in your system. You can configure this value using two methods.

Specify the tenant idle time when you configure the tenant loading policy:
1. Open the carbon.xml file.
2. Be sure that the <LazyLoading> element is enabled and <EagerLoading> is commented out as per the default setting.
3. Set the tenant idle time using the <IdleTime> element as shown below.
```
<Tenant>
   		 <LoadingPolicy>
      	     <LazyLoading>
           		 	<IdleTime>30</IdleTime>
       		 </LazyLoading>-->
       	 
  		</LoadingPolicy>
</Tenant>
```
Alternatively, you can specify the tenant idle time when you start the server:
1. Open the product startup script (./wso2server.sh file for Linux and wso2server.bat for Windows), which is stored in the <PRODUCT_HOME>/bin directory.
2. Add the following system property.
```
JAVA_OPTS \ 
     -Dtenant.idle.time=30 \
```
3. Restart the server.

Configuring Eager Loading

Follow the instructions given below to change the tenant loading policy to eager loading and to change the tenant idle time.

Enabling eager loading for tenants

Before you enable eager loading, note the following:

Web applications and axis2 services that are deployed as artifacts in your tenants follow the eager loading behavior by default unless the GhostDeployment setting is enabled, as explained above under Enabling lazy loading of artifacts. Therefore, when you enable eager loading for your tenants, make sure that GhostDeployment is disabled.
The server startup time may increase depending on the number of tenants and artifacts you have.
The server's memory usage will increase depending on the number of tenants and artifacts that are loaded.

Open the carbon.xml file from the <PRODUCT_HOME>/repository/conf/ directory.

Enable the <EagerLoading> element and comment out <LazyLoading> as shown below.

<Tenant>
   		 <LoadingPolicy>
      	 <!--<LazyLoading>
           		 	<IdleTime>30</IdleTime>
       		 </LazyLoading>-->
       		 <EagerLoading>
           			<Include>*,!foo.com,!bar.com</Include>
       		 </EagerLoading>
  		</LoadingPolicy>
</Tenant>

You can then list the specific tenant domains to which eager loading should apply, by using the <Include> element. See the following examples:
- If the setting should apply to all tenants, add <Include>*</Include>.
- If the setting should apply to all tenants, except foo.com and bar.com, add <Include>*,!foo.com,!bar.com</Include>.
- If the setting should apply only to foo.com and bar.com, add <Include>foo.com,bar.com</Include>.

Configuring the tenant unloading time (for eager loading)

If you have lazy loading enabled, you can configure the allowed tenant idle time during server startup.

Open the product startup script (./wso2server.sh file for Linux and wso2server.bat for Windows), which is stored in the <PRODUCT_HOME>/bin directory.

Add the following system property.

JAVA_OPTS \ 
     -Dtenant.idle.time=30 \

Restart the server.