This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The WSDL Endpoint is an endpoint definition based on a specified WSDL document.

The WSDL document can be specified in 2 ways:

  • As a URI.
  • As an inlined definition within the configuration.

XML Configuration

Note

You can configure the WSDL endpoint using XML. Click on the "Switch to source view" link in the "WSDL Endpoint" page.

<wsdl [uri="wsdl-uri"] service="qname" port/endpoint="qname">
    <wsdl:definition>...</wsdl:definition>?
    <wsdl20:description>...</wsdl20:description>?
    <enableRM [policy="key"]/>?
    <enableSec [policy="key"]/>?
    <enableAddressing/>?

    <timeout>
        <duration>timeout duration in milliseconds</duration>
        <action>discard|fault</action>
    </timeout>?

    <markForSuspension>
        [<errorCodes>xxx,yyy</errorCodes>]
        <retriesBeforeSuspension>m</retriesBeforeSuspension>
        <retryDelay>d</retryDelay>
    </markForSuspension>

    <suspendOnFailure>
        [<errorCodes>xxx,yyy</errorCodes>]
        <initialDuration>n</initialDuration>
        <progressionFactor>r</progressionFactor>
        <maximumDuration>l</maximumDuration>
    </suspendOnFailure>
</wsdl>

The service and port name containing the target EPR has to be specified with the service and port (or endpoint) attributes respectively.

enableRM, enableSec, enableAddressing, suspendDurationOnFailure and timeout elements are same as for an Address Endpoint.

UI Configuration

1. In the "Add Endpoint" list, click "WSDL Endpoint" (See Adding an Endpoint). The "WSDL Endpoint" page appears.

WSDL Endpoint

The following fields are specific to the WSDL Endpoint:

  • Name - A unique name for the endpoint.

  • WSDL URI- The URI of the WSDL.

    Tip

    Use the "Test" button to check the URI.

  • Service - The service selected from the available services for the WSDL.
  • Port - The port selected for the service specified in the above field. In a WSDL an endpoint is bound to each port inside each service.

2. In case you want to configure advanced options, click on the "Show Advanced Options" drop-down pane.

3. Then the page with all the available WSDL Endpoint options appears.

The fields are common for all endpoints. See the detailed information in Adding an Endpoint.

  • No labels