Sample 271: File Processing

Note that WSO2 EI is shipped with the following changes to what is mentioned in this documentation:

<PRODUCT_HOME>/repository/samples/ directory that includes all Integration profile samples is changed to <EI_HOME>/samples/service-bus/.
<PRODUCT_HOME>/repository/samples/resources/ directory that includes all artifacts related to the Integration profile samples is changed to <EI_HOME>/samples/service-bus/resources/.

Introduction

This sample demonstrates how to pick a file from a directory and process it within the ESB. In this sample scenario you pick a file from the local directory, insert the records in the file to a database, send an email with the file content, trace and write the log and finally move the file to another directory.

The following diagram displays the entities involved in this example.

Note

This example works with the MySQL database.

Building the sample

All files required for this sample are in sample.zip.

Follow the steps given below to build this sample.

Set up the database

Manually set up the database.

Create a table named info in your schema. You can run the following commands to do this.

delimiter $$

CREATE TABLE `info` (
  `name` varchar(45) DEFAULT '',
  `surname` varchar(45) DEFAULT NULL,
  `phone` varchar(45) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8$$

Make sure the info table is created and that it contains the following columns:
- name
- surname
- phone

The result of the query should be as follows when you query to view the records in the test.info table. You will see that there is no data in the table.

Create the main and fault sequences

Find the main.xml and fault.xml files in the attached sample.zip archive. You can find the files in the <SAMPLE_HOME>/conf/synapse-config/sequences directory.
Copy the files to <ESB_HOME>/repository/deployment/server/synapse-configs/default/sequences folder.
Note

The main and fault sequences are created and preconfigured automatically when you install WSO2 ESB.

Configure the ESB

You need to configure the ESB to use the VFS transport for processing the files, and the MailTo transport for sending the email message. You also need to configure the message formatter as specified.

Edit the <ESB_HOME>/repository/conf/axis2/axis2.xml file and configure the mailto transport sender as follows to use a mailbox for sending the messages:

<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
   <parameter name="mail.smtp.host">smtp.gmail.com</parameter>
   <parameter name="mail.smtp.port">587</parameter>
   <parameter name="mail.smtp.starttls.enable">true</parameter>
   <parameter name="mail.smtp.auth">true</parameter>
   <parameter name="mail.smtp.user">username</parameter>
   <parameter name="mail.smtp.password">userpassword</parameter>
   <parameter name="mail.smtp.from">username@gmail.com</parameter>
</transportSender>

Note

In this sample, you will not retrieve mails from a mailbox. Therefore, you do not need to enable the mailto transport receiver.

Add the following message formatter in the <ESB_HOME>/repository/conf/Axis2/axis2.xml file under the Message Formatters section:
```
<messageFormatter contentType="text/html" class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
```

Add database drivers

Find the MySQL database driver mysql-connector-java-5.1.10-bin.jar in the attached sample.zip archive. You can find the file in the <SAMPLE_HOME>/lib directory.
Copy the driver to the <WSO2ESB_HOME>/repository/components/lib directory.

Add smooks libraries

This example uses a CSV smooks library.

You can find the CSV smooks library milyn-smooks-csv-1.2.4.jar in the attached sample.zip archive. You can find the file in the <SAMPLE_HOME>/lib directory.
Copy the library to the <WSO2ESB_HOME>/repository/components/lib directory.
Note

These configuration changes make system-wide changes to the ESB and the ESB has to be restarted for these changes to take effect.
Configure a local entry as follows. For information on how to add a local entry, see this link. This local entry will be used to refer to the smooks configuration saved in the <SAMPLE_HOME>/resources/smooks-config.xml file.
```
<localEntry key="smooks" src="file:resources/smooks-config.xml"/>
```

Create and configure `FileProxy`

You can find the FileProxy.xml file in the attached sample.zip archive. It is located in the <SAMPLE_HOME>/conf/synapse-config/proxy-services directory.

The XML code of the sequence is as follows:

<proxy xmlns="http://ws.apache.org/ns/synapse" name="FileProxy" transports="vfs" startOnLoad="true" trace="disable">
    <target>
        <inSequence>
            <log level="full"/>
            <clone>
                <target sequence="fileWriteSequence"/>
                <target sequence="sendMailSequence"/>
                <target sequence="databaseSequence"/>
            </clone>
        </inSequence>
    </target>
    <parameter name="transport.vfs.ActionAfterProcess">MOVE</parameter>
    <parameter name="transport.PollInterval">15</parameter>
    <parameter name="transport.vfs.MoveAfterProcess">file:///home/username/test/original</parameter>
    <parameter name="transport.vfs.FileURI">file:///home/username/test/in</parameter>
    <parameter name="transport.vfs.MoveAfterFailure">file:///home/username/test/failure</parameter>
    <parameter name="transport.vfs.FileNamePattern">.*.txt</parameter>
    <parameter name="transport.vfs.ContentType">text/plain</parameter>
    <parameter name="transport.vfs.ActionAfterFailure">MOVE</parameter>
</proxy>

Edit the FileProxy.xml file, and define the directory to which the original file should be moved after processing.
```
<parameter name="transport.vfs.MoveAfterProcess">[file:///home/]<username>/test/original</parameter>
```

Edit the FileProxy.xml file, and define where the input file should be placed.

<parameter name="transport.vfs.FileURI">[file:///home/]<username>/test/in</parameter>

Edit the FileProxy.xml file, and define the directory to which the file should be moved if an error occurs.
```
<parameter name="transport.vfs.MoveAfterFailure">[file:///home/]<username>/test/failure</parameter>
```
Save the FileProxy.xml file to the <ESB_HOME>/repository/deployment/server/synapse-configs/default/proxy-services directory.

Create and configure `databaseSequence`

Follow the instructions below to create a sequence that can be used to connect to the database to insert the data.

You can find the databaseSequence.xml file in the attached sample.zip archive. It is located in the <SAMPLE_HOME>/conf/synapse-config/sequences directory.
The XML code of the database sequence is as follows.

<sequence xmlns="http://ws.apache.org/ns/synapse" name="databaseSequence">
    <log level="full">
        <property name="sequence" value="before-smooks"/>
    </log>
    <smooks config-key="smooks">
        <input type="text"/>
        <output type="xml"/>	
    </smooks>
    <log level="full">
        <property name="sequence" value="after-smooks"/>
    </log>
    <iterate xmlns:ns2="http://org.apache.synapse/xsd"
             xmlns:ns="http://org.apache.synapse/xsd"
             xmlns:sec="http://secservice.samples.esb.wso2.org"
             expression="//csv-records/csv-record">
      <target>
       <sequence>
        <dbreport>
          <connection>
           <pool>
             <password>db-password</password>
             <user>db-username</user>
             <url>jdbc:mysql://localhost:3306/test</url>
             <driver>com.mysql.jdbc.Driver</driver>
           </pool>
          </connection>
           <statement>
            <sql>insert into info values (?, ?, ?)</sql>
              <parameter expression="//csv-record/name/text()" type="VARCHAR"/>
              <parameter expression="//csv-record/surname/text()" type="VARCHAR"/>
              <parameter expression="//csv-record/phone/text()" type="VARCHAR"/>
            </statement>
        </dbreport>
      </sequence>
    </target>
  </iterate>
</sequence>

Specify your database username, password, and URL in the <pool> section of the sequence.
Save the databaseSequence.xml file to the <ESB_HOME>/repository/deployment/server/synapse-configs/default/sequences directory.

Create and Configure fileWriteSequence

You can find the fileWriteSequence.xml in the attached sample.zip archive. It is located in the <SAMPLE_HOME>/conf/synapse-config/sequences directory.

The XML code of the sequence is as follows:

<sequence xmlns="http://ws.apache.org/ns/synapse" name="fileWriteSequence">
    <log level="custom">
        <property name="sequence" value="fileWriteSequence"/>
    </log>
    <property xmlns:ns2="http://org.apache.synapse/xsd" name="transport.vfs.ReplyFileName" expression="fn:concat(fn:substring-after(get-property('MessageID'), 'urn:uuid:'), '.txt')" scope="transport"/>
    <property name="OUT_ONLY" value="true"/>
    <send>
        <endpoint name="FileEpr">
            <address uri="vfs:file:///home/username/test/out"/>
        </endpoint>
    </send>
</sequence>

Edit the fileWriteSequence.xml file, and define the directory to which the file should be moved.
Save the fileWriteSequence.xml file to the <ESB_HOME>/repository/deployment/server/synapse-configs/default/sequences directory.

Create and configure `sendMailSequence`

You can find the sendMailSequence.xml file in the attached sample.zip archive. It is located in the <SAMPLE_HOME>/conf/synapse-config/sequences directory.

The XML code of the sequence is as follows:

<sequence xmlns="http://ws.apache.org/ns/synapse" name="sendMailSequence">
    <log level="custom">
        <property name="sequence" value="sendMailSequence"/>
    </log>
    <property name="messageType" value="text/html" scope="axis2"/>
    <property name="ContentType" value="text/html" scope="axis2"/>
    <property name="Subject" value="File Received" scope="transport"/>
    <property name="OUT_ONLY" value="true"/>
    <send>
        <endpoint name="FileEpr">
            <address uri="mailto:username@gmail.com"/>
        </endpoint>
    </send>
</sequence>

Edit the sendMailSequence.xml file, and define the e-mail address to which the notification should be sent.
Save the sendMailSequence.xml file to the <ESB_HOME>/repository/deployment/server/synapse-configs/default/sequences directory.

Create the input file

Create a text file in the following format.

name_1, surname_1, phone_1
name_2, surname_2, phone_2

Executing the sample

Save the file in the .txt format to the in directory that you specified in step 3, under the create and configure FileProxy section.

Analyzing the output

In this sample, the ESB listens on a local file system directory. When a file is dropped into the in directory, the ESB picks this file.

Make sure the file appears in the out directory.
The ESB inserts the records from the text file to the database. Make sure the data is in the info table. The following screenshot displays the content of the test.info table with the data from the file.
Make sure the original file is moved to the /home/<username>/test/original directory.
Make sure the e-mail notification is sent to the email address that is specified. The message should contain the file data. The following screenshot displays a notification received.