Analyzing Login Errors
- Former user (Deleted)
- Former user (Deleted)
To analyze the Login Errors,
- Login to admin portal (https://<ip_address>:<port>/admin).
- In the left navigation, Click LOGIN ERRORS under LOG ANALYZER.
At any given time, this page displays the statistics for a selected time interval.
- If you want to view statistics for a pre-defined time interval, click on the relevant time interval (e.g., Last 30 Days).
- If you want to define a custom time interval, click Custom and select the start and end dates of the required time interval in the calendar that appears. Then click Apply.
Introduction
This page indicates the number of login attempt failures that have occurred during the selected time interval in a bar chart as shown in the example below. The exact count for a specific unit of time (e.g., day, hour, etc.) can be viewed by moving the cursor over the relevant bar.
The Login Errors page does not display any statistics relating to the APIM Gateway and APIM Traffic Manager profiles because it is not required to login to these profiles. It is also not recommended to activate the Log Analyzer for the APIM Key Manager profile because it is used by administrators and therefore, the logins to that profile should not be configured when evaluating the usage of your applications by customers.
Purpose
This page allows you to identify the time periods during which login errors have occurred to understand what caused them.
Recommended action
Compare the count for failed login errors at different time intervals. If the count is particularly high during specific time intervals, check for any unusual occurrences that may have taken place during that time (e.g., system downtime). If a high count for login errors is observed for all time intervals, check the relevant configurations in WSO2 API Manager (e.g., configuration of users and user roles).