Configuring External User Stores

The WSO2 User Manager authenticates users from different types of user stores and currently has the capability to easily plug-in to LDAP, Active Directory and JDBC to perform authentication.

How to Configure an External LDAP User Store / Active Directory User Store

All WSO2 Carbon based products can read and write users and roles from external LDAP user stores. You can configure Carbon products to access LDAP in one of the following modes.

• Read-Only Mode
• Read/Write Mode

Read-Only Mode

All WSO2 Carbon based products can read users and roles from external LDAP/Active Directory user stores. You can configure Carbon products to read users/roles from your company LDAP. The "Read Only" mode does not write any data into the LDAP.

Note that LDAP is used going forward to refer to both LDAP and ActiveDirectory servers.

Step 1 : Backup <carbon-home>/repository/conf/user-mgt.xml.

• A sample file for LDAP user store is given below:

<UserManager>
 <Realm>
   <Configuration>
      <AdminRole>admin</AdminRole>
      <AdminUser>
         <UserName>admin</UserName>
         <Password>XXXXXX</Password>
      </AdminUser>
      <EveryOneRoleName>everyone</EveryOneRoleName>
      <!-- By default users in thsi role sees the registry root -->
      <Property name="dataSource">jdbc/WSO2CarbonDB</Property>
      <Property name="MultiTenantRealmConfigBuilder">org.wso2.carbon.user.core.config.multitenancy.SimpleRealmConfigBuilder</Property>
   </Configuration>
 
   <UserStoreManager class="org.wso2.carbon.user.core.ldap.ReadOnlyLDAPUserStoreManager"> 
      <Property name="ConnectionURL">ldap://localhost:10389</Property>
      <Property name="ConnectionName">uid=admin,ou=system</Property>
      <Property name="ConnectionPassword">admin123</Property>
      <Property name="UserSearchBase">ou=system</Property>
      <Property name="UserNameListFilter">(objectClass=person)</Property>
      <Property name="UserNameAttribute">uid</Property>
      <Property name="ReadLDAPGroups">false</Property>
      <Property name="GroupSearchBase">ou=system</Property>
      <Property name="GroupNameSearchFilter">(objectClass=groupOfNames)</Property>
      <Property name="GroupNameAttribute">cn</Property>
      <Property name="MembershipAttribute">member</Property>
   </UserStoreManager>
 
 </Realm>
</UserManager>

• A sample file for Active Directory is given below:

<UserManager>
  <Realm>
   <Configuration>
      <AdminRole>admin</AdminRole>
      <AdminUser>
         <UserName>admin</UserName>
         <Password>XXXXXX</Password>
      </AdminUser>
      <EveryOneRoleName>everyone</EveryOneRoleName>
      <!-- By default users in thsi role sees the registry root -->
      <Property name="dataSource">jdbc/WSO2CarbonDB</Property>
      <Property name="MultiTenantRealmConfigBuilder">org.wso2.carbon.user.core.config.multitenancy.SimpleRealmConfigBuilder</Property>
   </Configuration>
 
    <!-- Active directory configuration follows -->
    <UserStoreManager class="org.wso2.carbon.user.core.ldap.ActiveDirectoryUserStoreManager">>
       <Property name="ConnectionURL">ldap://10.100.1.211:389</Property>
       <Property name="ConnectionName">cn=Administrator,cn=users,dc=wso2,dc=lk</Property>
       <Property name="ConnectionPassword">admin123</Property>
       <Property name="UserSearchBase">cn=users,dc=wso2,dc=lk</Property>
       <Property name="UserNameListFilter">(objectClass=person)</Property>
       <Property name="UserNameAttribute">sAMAccountName</Property>
       <Property name="ReadLDAPGroups">true</Property>
       <Property name="GroupSearchBase">cn=users,dc=wso2,dc=lk</Property>
       <Property name="GroupNameSearchFilter">(objectcategory=group)</Property>
       <Property name="GroupNameAttribute">cn</Property>
       <Property name="MembershipAttribute">member</Property>
    </UserStoreManager>
 
  </Realm>
</UserManager>

Copy the user-mgt-ldap.xml file and save it as <carbon-home>/repository/conf/user-mgt.xml. When you are configuring for ActiveDirectory, do the same to user-mgt-actdir.xml.

Note the following in your file.  

<UserStoreManager class="org.wso2.carbon.user.core.ldap.ReadOnlyLDAPUserStoreManager"> 

Step 2 : Find a valid user that resides in the Directory Server. For example, let's say a valid user name is "AdminSOA". Update the Admin user section of your ldap configuration as follows. You don't have to update the password element; leave it as it is.

<AdminUser>
   <UserName>AdminSOA</UserName>
   <Password>XXXXXX</Password>
</AdminUser>

Step 3 : Update the connection details to suit your Directory Server.

<Property name="ConnectionURL">ldap://localhost:10389</Property>

Step 4 : Obtain a user who has permission to read all users/attributes and perform searches on the Directory Server from your LDAP administrator. For example, let's say the privileged user is "AdminLDAP" and password is "2010#Avrudu". Now update the following sections of the realm configuration.

<Property name="ConnectionName">uid=AdminLDAP,ou=system</Property>
<Property name="ConnectionPassword">2010#Avrudu</Property>

Update the <Property name="UserSearchBase"> by giving the directory where the users are stored. LDAP searches for users will start from this location.

Property name="UserSearchBase">ou=system</Property>

Step 5 : Set the attribute that you wish to be used as the username. The most common case is to use either "cn" or "uid" as the username. If you are not sure what attribute is available in your LDAP, check with your LDAP administrator.

<Property name="UserNameAttribute">uid</Property>

For Active Directory this is different.

<Property name="UserNameAttribute">sAMAccountName</Property>

Step 6 : This is the most basic configuration. For more advanced options like "external roles", jump to step 7. Otherwise you are done! Now start your server and try to login as "AdminSOA". The password is the AdminSOA's password in the LDAP server.

If you are unable to login, contact the WSO2 carbon user group according to the contact details given under "community and support" section on the welcome page.

Step 7 : The realm can read roles from the Directory Server. It can read user/role mapping based on a backlink attribute or membership (user list) attribute.

• Step 7.1 : Reading roles based on a membership attribute. This is used by the ApacheDirectory server and OpenLDAP.

<Property name="ReadLDAPGroups">false</Property>
<Property name="GroupSearchBase">ou=system</Property>
<Property name="GroupSearchFilter">(objectClass=groupOfNames)</Property>
<Property name="GroupNameAttribute">cn</Property>
<Property name="MembershipAttribute">member</Property>

• Step 7.2 : Reading roles based on a backlink attribute. This is used by the Active Directory.

<Property name="ReadLDAPGroups">true</Property>
<Property name="GroupSearchBase">cn=users,dc=wso2,dc=lk</Property>
<Property name="GroupSearchFilter">(objectcategory=group)</Property>
<Property name="GroupNameAttribute">cn</Property>
<Property name="MemberOfAttribute">memberOf</Property>

The following table contains detail descriptions of each property.

Read/Write Mode

If you wish to connect to external LDAP user store such that only the user entries are written to external LDAP and roles are not written to external LDAP, the only difference from the steps in section "Read-Only Mode" is in following:

<UserStoreManager class="org.wso2.carbon.user.core.ldap.ReadWriteLDAPUserStoreManager">

How to Configure an External JDBC User Store 

All Carbon based products can work with external RDBMSs. You can configure Carbon to read users/roles from your company RDBMS and even write to it. Therefore, the user core connected to two databases.

• Carbon database where authorization information is stored in the internal Carbon database.
• Your company database where users/roles resides.

So the user-mgt.xml file must contain details for two database connections. The connection details mentioned earlier is used by the Authorization manager. If we specify another set of database connection details inside UserStoreManager, it will read/write users to that database. Step by step guidelines for connecting to an external JDBC user store in read-only mode is given below.

Step 1 : Back-up the <carbon-home>/repository/conf/user-mgt.xml file. A sample file for JDBC user store (user-mgt-jdbc.xml) is available in <carbon-home>/repository/conf directory. Download the relevant file and save it as <IS_HOME>/repository/conf/user-mgt.xml. Uncomment the following section in your file if it is commented out.

<UserStoreManager class="org.wso2.carbon.user.core.jdbc.JDBCUserStoreManager">

Step 2 : Find a valid user that resides in the RDBMS. For example, say a valid username is AdminSOA. Update the Admin user section of your ldap configuration as follows. You don't have to update the password element; leave it as it is.

<AdminUser>
   <UserName>AdminSOA</UserName>
   <Password>XXXXXX</Password>
</AdminUser>

Step 3 : In user-mgt.xml file, add passwordHashMethod property within the JDBCUserStoreManager. For example,

<UserStoreManager class="org.wso2.carbon.user.core.jdbc.JDBCUserStoreManager">
     <Property name="passwordHashMethod">SHA</Property>
     ...
</UserStoreManager>

The passwordHashMethod property specifies how the password should be stored, and usually has the values:

• SHA - Uses SHA digest method.
• MD5 - Uses MD 5 digest method.
• PLAIN_TEXT - Plain text passwords.
• In addition, it also supports all digest methods in http://docs.oracle.com/javase/6/docs/api/java/security/MessageDigest.html.

Step 4 : Update connection details inside <UserStoreManager> class.

Step 5 : In user-mgt.xml file, under realm configuration, set the value of MultiTenantRealmConfigBuilder property to org.wso2.carbon.user.core.config.multitenancy.SimpleRealmConfigBuilder. For example,

<Property name="MultiTenantRealmConfigBuilder">org.wso2.carbon.user.core.config.multitenancy.SimpleRealmConfigBuilder</Property>

Step 6 : Add the JDBC driver to the classpath by dropping the jar to <carbon-home>/repository/components/lib directory.

Step 7 : Edit the SQLs in user-mgt.xml file according to your requirements, and start the server.