Setting up CEP Samples

For information on understanding the general flow of WSO2 CEP samples, see WSO2 CEP Samples. The following sections explain the generic setup instructions to execute the samples.

Prerequisites

Following applications are required for running the WSO2 CEP samples in this documentation.

Sample	Requirements
All samples	Oracle Java SE Development Kit (JDK)/JRE version 1.7./1.8. (to launch the product and to run Apache Ant.) Apache Ant 1.7.0 or later (to compile and run the product samples.) WSO2 Complex Event Processor (CEP)
JMS related samples	The JMS samples are explained to be tried out using following JMS providers Apache Active MQ 5.7.0 - 5.9.0 versions. Apache Qpid 0.32 version. WSO2 Message Broker (MB) 3.0.0-ALPHA2 version. For instructions on WSO2 MB, go to Message Broker documentation. For more information on the prerequisites required for the JMS samples, see Setting up JMS samples.
MQTT related samples	The MQTT samples are explained to be tried out using following MQTT-supported servers Apache Active MQ 5.11.1 version or Mosquitto 1.4.3 version For more information on the prerequisites required for the MQTT samples, see Setting up MQTT samples.
Kafka related samples	The Kafka samples are explained to be tried out using following Kafka Broker versions Apache Kafka 2.10-0.8.2.1 version For more information on the prerequisites required for the Kafka samples, see Setting up Kafka samples.
WebSocket related samples	Java Development Kit / JRE version 1.7.*
Apache Storm related samples	Apache Storm version 0.9.3 or later (to run Storm samples.)

Starting sample CEP configurations

To start the CEP with a sample configuration, run the following command with -sn <n>, where <n> denotes the number assigned to the sample.

On Linux:	./wso2cep-samples.sh -sn <n>
On Windows:	wso2cep-samples.bat -sn <n>

For example, to start the CEP with the configuration of sample 0101, run the following command inside <CEP_HOME>/bin directory:

On Linux: 	./wso2cep-samples.sh -sn 0101 
On Windows:	wso2cep-samples.bat -sn 0101

The <CEP_HOME>/samples/artifacts directory contains the sample configurations of CEP. Each configuration is inside a sub directory by the name of the sample numbered <n>. For example, the cep artifacts for sample 0101 is inside<CEP_HOME>/samples/artifacts/0101 directory.

In the normal mode the <CEP_HOME>/bin/wso2server.bat or <CEP_HOME>/bin/wso2server.sh script starts an instance of the CEP using the configuration files in <CEP_HOME>/repository/deployment/server directory and any sample configurations passed in as -sn <n> is ignored.

These configurations on running the samples point the default Axis2 repo to <CEP_HOME>/sample/artifacts/<SAMPLE_NUMBER>/ directory. (<CEP_HOME>/repository/deployment/server/ directory is used as the default Axis2 repo.)

Starting sample consumers

Each sample consumer service is saved in a separate directory as <CEP_HOME>/samples/consumers/<consumer_name> .

To start a sample consumer, go to its directory <CEP_HOME>/samples/consumers/<comsumer_name> and type ant. For example,

user@host:/tmp/wso2cep-4.1.0/samples/consumers/wso2-event$ ant
Buildfile: /home/user/tmp/wso2cep-4.1.0/samples/consumers/wso2-event/build.xml
...
run:[echo] To configure host, port and events use -Dhost=xxxx -Dport=xxx -Devents=xx
 [echo] Sending to : http://localhost:7661
            
 [java] Test Server starting on 10.100.0.75
 [java] Thrift Server started at 10.100.0.75
 [java] Thrift SSL port : 7761
 [java] Thrift port : 7661
 [java] Test Server Started

To write a custom wso2Event data publisher (Thrift data publisher), use the pom file given here .

Deploy the log service sample consumer, which is a Web service, by specifying the sample number as follows:

ant -DsampleNo=<sample no>

Running DsampleNo ant script deploys the log service in the axis2 repository that is relevant to the specified sample. After proper deployment, the Web service is able to receive messages from the CEP server.

user@host:/tmp/wso2cep-4.1.0/samples/consumers/logService$ ant -DsampleNo=0102
Buildfile: /home/usre/tmp/wso2cep-4.0.0/samples/consumers/logService/build.xml
-folder.check:
-assign.sample:
 [echo] Sample No : 0102
 [echo] Services Dir : ../../../samples/artifacts/0102/axis2services
-assign.main:
folder.set:
clean:
...
[jar] Building jar: /tmp/wso2cep-4.1.0/repository/deployment/server/webapps/logService.war
BUILD SUCCESSFUL
Total time: 0 seconds

Starting sample producers

Starting a sample producer is similar to starting a consumer.

Go to the sample producer's directory <CEP_HOME>/samples/producers/<producer_name> and type ant with relevant input arguments. For example,

user@host:/home/user/wso2cep-4.1.0/samples/producers/pizza-shop$  ant pizzaOrderClient -Dservice=WSEventLocalAdaptorService 
-DtopicName=BatchedPizzaOrder -DbatchedEvents=true
Buildfile: /home/user/tmp/wso2cep-4.1.0/samples/producers/pizza-shop/build.xml
init:
compile:
[copy] Copying 1 file to /home/user/tmp/wso2cep-4.1.0/samples/producers/pizza-shop/temp/classes
pizzaOrderClient:
[echo] To configure host and port use -Dhost=xxxx -Dport=xxx -Dservice=xxx -DtopicName=xxx
[echo] Sending to : http://localhost:9763/services/WSEventLocalAdaptorService/BatchedPizzaOrder
            
[echo] To send events in batches use -DbatchedEvents=true
[echo] Sending events in batches : true
BUILD SUCCESSFUL
Total time: 1 second

Passing arguments to sample clients

Some sample clients take extra arguments. The following table presents the format in which these arguments can be passed.

Purpose	Syntax	Example	Default
To specify the publishing topic for the producer client.	`-DtopicName=XXXX`	`ant -DtopicName=AllStockQuotes`	`AllStockQuotes`
To publish to a specific host, which is an IP address.	`-Dhost=XXXX`	`ant -Dhost=org.test.domain`	`localhost`
To publish to a specific port.	`-Dport=XXXX`	`ant pizzaOrderClient -Dport=9764`	`9763`
To publish to a specific Web service.	`-Dservice=XXXX`	`ant pizzaOrderClient -Dservice=wsInAdaptorService`	`WSEventLocalAdaptorService`
To send events in batches (i.e., the adapter receives a batch of events).	`-DbatchedEvents={true\|false}`	`ant -DbatchedEvents=true`
To publish events to a specific client URL.	`-Durl='client url'`	`-Durl=http://localhost:9763/endpoints/httpReceiver`
To subscribe events from a JMS topic (consumer).	`-DtopicName=XXXXXX`	`ant topicConsumer -DtopicName=TestTopic`	`TestTopic`
To subscribe events from a JMS queue (consumer).	`-Dqueue=XXXXX`	`ant queueConsumer -Dqueue=DelayedFlightStats`	`DelayedFlightStats`
To receive events from a specific format from the text document (producer).	`-Dformat=xxxx(csv, text, json, xml)`	`ant -Dformat=csv`
To specify the JMS broker to which the CEP server listens.	`-Dbroker=xxxx(activemq, mb, qpid)`	`ant -Dbroker=activemq`
To publish events in a specific event stream (producer).	`-DstreamId=xxxx:x.x.x`	`ant -DstreamId=org.wso2.event.sensor.stream:1.0.0`
To publish events from the specific sample folder (producer).	`-Dsn='sample number'` or `-DfilePath=xxxx`	`ant -Dsn=00`
To specify whether the protocol based on which events are received is thrift or binary.	`-Dprotocol='thrift/binary'`	`ant -Dprotocol=binary`
To specify the username when an action performed by a sample requires user credentials to be specified.	`-Dusername=xxxx`	`-Dusername=admin`
To specify the password when an action performed by a sample requires user credentials to be specified.	`-Dpassword=xxxx`	`-Dpassword=admin`
When doing a performance test, this argument specifies the number of events with which the test should be carried out.	`-Devents=xx` or `-DnoOfEvents=xxxx` or `-DeventCount=xxxx`	`-Devents=2000000`	`10000`
When doing a performance test, this argument specifies the delay that occurs between events in milli seconds.	`-Ddelay='delay between events in ms'`	`-Ddelay=1000`
When doing a performance test, the this argument specifies the number of events after which the throughput/latency should be calculated.	`-DelapsedCount=xxxx`	`-DelapsedCount=10000`	`10000`
When doing a performance test, this argument specifies the number of publishers that should be used to publish events.	`-DnoOfPublishers=xxxx`	`-DnoOfPublishers=50`
When doing a performance test, this argument specifies the number of events that should be sent to the event flow for the CEP server to warm up and reach a stabilize.	`-DwarmUpCount=xxxx`	`-DwarmUpCount=200000`	`10000`
When doing a performance test, this argument is used to specify whether you want to calculate the throughput or the latency. Throughput: This is the number of events processed concurrently at a given time by an event flow. Latency: This is the time taken by the event flow to process a single event.	`-DcalcType='throughput/latency'`	`-DcalcType=throughput`	`throughput`

Setting up JMS for JMS sample clients

Before you run JMS samples, set up and start a JMS provider. Configure JMS providers by copying relevant JMS client libraries to <CEP_HOME>/samples/lib folder as mentioned below.

For Apache ActiveMQ, the relevant JAR files are,

<ActiveMQ_HOME>/activemq-all-5.7.0.jar
<ActiveMQ_HOME>/lib/ geronimo-jms_1.1_spec-1.1.1.jar

Previous Apache ActiveMQ versions may not contain SLF4J related files in the client JAR. Therefore, if you get an error, add SLF4J related JAR file to<CEP_HOME>/samples/lib/ directory of the samples.

For Apache Qpid, the relevant JAR files are,

<QPID-CLIENT_HOME>/lib/geronimo-jms_1.1_spec-1.1.1.jar
<QPID-CLIENT_HOME>/lib/qpid-client-0.32.jar
<QPID-CLIENT_HOME>/lib/qpid-common-0.32.jar

For WSO2 Message Broker (MB) , the relevant JAR files are,

<MB_HOME>/client-lib/andes-client-2.6.1.jar
<MB_HOME>/client-lib/log4j-1.2.13.jar
<MB_HOME>/client-lib/slf4j-1.5.10.wso2v1.jar
<MB_HOME>/client-lib/geronimo-jms_1.1_spec-1.1.0.wso2v1.jar

Setting up MQTT for MQTT sample clients

Before you run MQTT samples, set up and start a MQTT-supported server. Configure MQTT sample clients by copying relevant MQTT client libraries to <CEP_HOME>/samples/lib folder as mentioned below.

Download and add MQTT client library (mqtt-client-0.4.0.jar) to <CEP_HOME>/samples/lib directory.

Setting up Kafka for Kafka sample clients

Before you run Kafka samples, set up and start a Kafka broker. Configure Kafka sample clients by copying relevant Kafka client libraries to <CEP_HOME>/samples/lib folder as mentioned below.

Copy all the JAR files, which are located in <KAFKA_HOME>/libs/ directory to <CEP_HOME>/samples/lib/ directory.