This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Working with Connectors via the Management Console

Owned by Former user (Deleted)
Last updated: Mar 08, 2017 by Former user (Deleted)
1 min read

There are over a hundred connectors that you can download from the WSO2 Connector Store. You can also write your own connectors and make them available to other users as ZIP files.

Before you use a connector, you must add it to your WSO2 EI instance and then enable it. See the following topics for information on how to manage connectors via the Management Console:

Adding a connector

Follow the steps given below to add a connector.

  1. Open the Management Console.
  2. On the Management Console, under Connectors click Add to open the Add Connector page.
  3. Click Choose File, select the required connector ZIP file, and click Choose.
  4. Click Upload.

The connector will now appear in the Connectors list and is ready to be enabled in your WSO2 EI instance.

Enabling/disabling a connector

Follow the steps given below to enable a connector.

  1. On Management Console, under Connectors click List to view the uploaded connectors.
  2. Click Enable next to a connector you want to enable, and then confirm that you want to change its status. Repeat this step for each connector you want to enable.

Follow the steps given below to disable a connector.

  • If you want a connector to be temporarily unavailable in your WSO2 EI instance, click Disable.
  • If you want to remove the connector permanently from your instance, click Delete.