Sample 0: Introduction to Integrator

Introduction

This sample demonstrates how a message can be passed through the WSO2 EI and logged before it is delivered to its receiver. This is a basic, introductory usecase of WSO2 EI. In this sample, you will deploy a sample client and a sample back-end service, and then transfer a message to the back-end service from the client through the WSO2 EI.

Prerequisites

For a list of prerequisites, see Prerequisites to Start Samples.

Building the sample

The XML configuration for this sample is as follows: 

<definitions xmlns="http://ws.apache.org/ns/synapse">
   <sequence name="main">
      <in>
         <!-- log all attributes of messages passing through -->
         <log level="full"/>
         <!-- Send the message to implicit destination -->
         <send/>
      </in>
      <out>
         <!-- log all attributes of messages passing through -->
         <log level="full"/>
         <!-- send the message back to the client -->
         <send/>
      </out>
   </sequence>
</definitions>

This configuration file  synapse_sample_0.xml is available in the <EI_HOME>/samples/service-bus directory.

To build the sample

1. Start WSO2 EI with the sample 0 configuration. For instructions on starting a sample configuration, see Starting a sample configuration.
   
   The operation log keeps running until the server starts, which usually takes several seconds. Wait until the server has fully booted up and displays a message similar to "WSO2 Carbon started in n seconds."

2. Start the Axis2 server. For instructions on starting the Axis2 server, see Starting the Axis2 server.

3. Deploy the back-end service SimpleStockQuoteService. For instructions on deploying sample back-end services, see Deploying sample back-end services.

   Now you have a running WSO2 EI instance and a back-end service deployed. In the next section, we will send a message to the back-end service through WSO2 EI using a sample client.

Executing the sample

The sample client used here is the Stock Quote Client, which can operate in several modes. For further details on this sample client and its operation modes, see Stock Quote Client.

To execute the sample client

• Run the following commands from the <EI_HOME>/samples/axis2Client directory, to execute the Stock Quote Client in its various modes.
  
  To execute the Stock Quote Client in the Smart Client Mode, run the following command:

  ant stockquote -Daddurl=http://localhost:9000/services/SimpleStockQuoteService -Dtrpurl=http://localhost:8280/

  To execute the Stock Quote Client in the Proxy Client Mode, run the following command:

  ant stockquote -Daddurl=http://localhost:9000/services/SimpleStockQuoteService -Dprxurl=http://localhost:8280/

  To execute the Stock Quote Client in the Gateway/ Dumb Client Mode:

  See Sample 1: Simple Content-Based Routing (CBR) of Messages.

Running each command specified above triggers a sample message to the back-end service. If the message is mediated successfully, an output is displayed on the start-up console of the Axis2 server.

Analyzing the output

Analyze  the output debug messages to understand the actions that are performed.

When you analyze the output debug messages for the actions in the Smart Client Mode, you will see the client request arriving at WSO2 EI with a WS-Addressing To header set to EPR  http://localhost:9000/services/SimpleStockQuoteService .WSO2 EI logs the message in the full log level (i.e, all the message headers and the body) and then sends the message to its implicit To address which is  http://localhost:9000/services/SimpleStockQuoteService .

You will see a message as follows on the Axis2 server console confirming that the message is routed to the sample server, and that the sample service hosted at the sample server generates a stock quote for the requested symbol.

Sat Nov 18 21:01:23 IST 2006 SimpleStockQuoteService :: Generating quote for : IBM

The response message generated by the service is again received by WSO2 EI and flows through the same mediation rules, which logs the response message and then sends it back to the client. On the client console you will see an output as follows, based on the message received by the client.

Standard :: Stock price = $95.26454380258552

When you analyze the output debug messages for the actions in the Proxy Client Mode, You will see exactly the same behavior as in the previous scenario. However, this time the difference is at the client, as it sends the message to the WS-Addressing To address  http://localhost:9000/services/SimpleStockQuoteService , but the transport specifies WSO2 EI as the HTTP Proxy.