Configuring an Active Directory User Store

Note that the RDBMS used in the default configuration can remain as the database used for storing Authorization information.

Follow the given steps to configure an external Active Directory as the primary user store:

Step 1: Setting up the external AD user store manager

1. Enable the ActiveDirectoryUserStoreManager class in the <PRODUCT_HOME>/repository/conf/user-mgt.xml file by uncommenting the code. When it is enabled, the user manager reads/writes into the Active Directory user store. 

   Note that these configurations already exist in the user-mgt.xml file so you only need to uncomment them and make the appropriate adjustments. Also ensure that you comment out the configurations for other user stores which you are not using.

2. The default configuration for the external read/write user store in the user-mgt.xml file is as given below. Change the values according to your requirement. For more information about  user store properties , see the  related documentation .

   <UserStoreManager class="org.wso2.carbon.user.core.ldap.ActiveDirectoryUserStoreManager">
               <Property name="TenantManager">org.wso2.carbon.user.core.tenant.CommonHybridLDAPTenantManager</Property>
               <Property name="defaultRealmName">WSO2.ORG</Property>
               <Property name="Disabled">false</Property>                                   
               <Property name="kdcEnabled">false</Property>
               <Property name="ConnectionURL">ldaps://10.100.1.100:636</Property> 
               <Property name="ConnectionName">CN=admin,CN=Users,DC=WSO2,DC=Com</Property>
               <Property name="ConnectionPassword">A1b2c3d4</Property>
   	    	<Property name="PasswordHashMethod">PLAIN_TEXT</Property>
               <Property name="UserSearchBase">CN=Users,DC=WSO2,DC=Com</Property>
               <Property name="UserEntryObjectClass">user</Property>
               <Property name="UserNameAttribute">cn</Property>
               <Property name="isADLDSRole">false</Property>
   	    	<Property name="userAccountControl">512</Property>
               <Property name="UserNameListFilter">(objectClass=user)</Property>
   	    	<Property name="UserNameSearchFilter">(&amp;(objectClass=user)(cn=?))</Property>
               <Property name="UsernameJavaRegEx">[a-zA-Z0-9._-|//]{3,30}$</Property>
               <Property name="UsernameJavaScriptRegEx">^[\S]{3,30}$</Property>
               <Property name="PasswordJavaScriptRegEx">^[\S]{5,30}$</Property>
   	    	<Property name="RolenameJavaScriptRegEx">^[\S]{3,30}$</Property>
               <Property name="RolenameJavaRegEx">[a-zA-Z0-9._-|//]{3,30}$</Property>
   	    	<Property name="ReadGroups">true</Property>
   	    	<Property name="WriteGroups">true</Property>
   	    	<Property name="EmptyRolesAllowed">true</Property>
               <Property name="GroupSearchBase">CN=Users,DC=WSO2,DC=Com</Property>
   	    	<Property name="GroupEntryObjectClass">group</Property>
               <Property name="GroupNameAttribute">cn</Property>
               <Property name="SharedGroupNameAttribute">cn</Property>
               <Property name="SharedGroupSearchBase">ou=SharedGroups,dc=wso2,dc=org</Property>
               <Property name="SharedGroupEntryObjectClass">groups</Property>
               <Property name="SharedTenantNameListFilter">(object=organizationalUnit)</Property>
               <Property name="SharedTenantNameAttribute">ou</Property>
               <Property name="SharedTenantObjectClass">organizationalUnit</Property>
               <Property name="MembershipAttribute">member</Property>
               <Property name="GroupNameListFilter">(objectcategory=group)</Property>
   	    	<Property name="GroupNameSearchFilter">(&amp;(objectClass=group)(cn=?))</Property>
               <Property name="UserRolesCacheEnabled">true</Property>
               <Property name="Referral">follow</Property>
   	    	<Property name="BackLinksEnabled">true</Property>
               <Property name="MaxRoleNameListLength">100</Property>
               <Property name="MaxUserNameListLength">100</Property>
               <Property name="SCIMEnabled">false</Property>
   </UserStoreManager>

   When working with Active Directory;

   • It is best to enable the GetAllRolesOfUserEnabled property in the AuthorizationManager as follows. See the documentation on configuring the Authorization Manager for more information.

     <AuthorizationManager class="org.wso2.carbon.user.core.authorization.JDBCAuthorizationManager">
     	<Property name="AdminRoleManagementPermissions">/permission</Property>
     	<Property name="AuthorizationCacheEnabled">true</Property>
     	<Property name="GetAllRolesOfUserEnabled">true</Property>
     </AuthorizationManager>

     Although using the user store manager does not depend on this property, you must consider enabling this if there are any performance issues in your production environment. Enabling this property affects the performance when the user logs in. This depends on the users, roles and permission stats.
      

   • If you are using  ldaps  (secured) to connect to the Active Directory as shown in the example below, you need to import the certificate of Active Directory to the  client-truststore.jks  of the WSO2 product. See the topic on configuring  keystores  for information on how to add certificates to the trust-store.
     

     <Property name="ConnectionURL">ldaps://10.100.1.100:636</Property>

3. For Active Directory, you can use <Property name="Referral">follow</Property> to enable referrals within the user store. The AD user store may be partitioned into multiple domains. However, according to the use store configurations in the user-mgt.xml file, we are only connecting to one of the domains. Therefore, when a request for an object is received to the user store, the  <Property name="Referral">follow</Property>  property ensures that all the domains in the directory will be searched to locate the requested object.
    

4. Set the attribute to use as the username, typically either cn or uid for LDAP. Ideally, <Property name="UserNameAttribute"> and <Property name="UserNameSearchFilter"> should refer to the same attribute. If you are not sure what attribute is available in your user store, check with your LDAP/Active Directory administrator. 

   <Property name="UserNameAttribute">sAMAccountName</Property>

5. Set the ReadGroups property to 'true', if it should be allowed to read roles from this user store. When this property is 'true', you must also specify values for the GroupSearchBase, GroupSearchFilter and GroupNameAttribute properties. If the ReadGroups property is set to 'false', only Users can be read from the user store. You can set the configuration to read roles from the user store by reading the user/role mapping based on a membership (user list) or backlink attribute as shown below.
   
   To read the user/role mapping based on a membership (This is used by the ApacheDirectory server and OpenLDAP): 

   • Enable the ReadGroups property.

     <Property name="ReadGroups">true</Property>

   • Set the GroupSearchBase property to the directory name where the Roles are stored. That is, the roles you create using the management console of your product will be stored in this directory location. Also, when LDAP searches for users, it will start from this location of the directory. For example:

     <Property name="GroupSearchBase">ou=system,CN=Users,DC=wso2,DC=test</Property>

   • Set the GroupSearchFilter and GroupNameAttributes. For example:

     <Property name="GroupSearchFilter">(objectClass=groupOfNames)</Property>
     <Property name="GroupNameAttribute">cn</Property>

   • Set the MembershipAttribute property as shown below:

     <Property name="MembershipAttribute">member</Property> 

   To read roles based on a backlink attribute, use the following code snipet instead of the above:

   <Property name="ReadGroups">false</Property>
   <Property name="GroupSearchBase">ou=system</Property>
   <Property name="GroupSearchFilter">(objectClass=groupOfNames)</Property>
   <Property name="GroupNameAttribute">cn</Property>
   <Property name="MembershipAttribute">member</Property>
   
   <Property name="BackLinksEnabled">true</Property>
   <Property name="MembershipOfAttribute">memberOf</Property> 

Step 2: Updating the system administrator

The admin user is the super tenant that will be able to manage all other users, roles and permissions in the system by using the management console of the product. Therefore, the user that should have admin permissions is required to be stored in the user store when you start the system for the first time. Since the Active Directory user store can be written to, you have the option of creating a new admin user in the user store when you start the system for the first time. Alternatively, you can also use a user ID that already exists in the user store. See the related documentation for more information about the system administrator.

These two alternative configurations can be done as explained below.

• Find a valid user that already resides in the user store. For example, say a valid username is AdminSOA. Update the <AdminUser> section of your configuration as shown below. You do not have to update the password element as it is already set in the user store.

  <AddAdmin>False</AddAdmin> 
  <AdminRole>admin</AdminRole> 
  <AdminUser>
   <UserName>AdminSOA</UserName> 
   <Password>XXXXXX</Password> 
  </AdminUser>

• Since the user store can be written to, you can add the super tenant user to the user store. Therefore, <AddAdmin> should be set to true as shown below.

  <AddAdmin>true</AddAdmin> 
  <AdminRole>admin</AdminRole> 
  <AdminUser> 
   <UserName>admin</UserName> 
   <Password>admin</Password> 
  </AdminUser>

Step 3: Starting the server

Start your server and try to log in as the admin user you specified. 

Related Topics