This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

SCIM 1.1 APIs

Owned by Former user (Deleted)
Last updated: Jul 26, 2018 by Former user (Deleted)
7 min read

The SCIM API can be called in order to perform various tasks in the WSO2 Identity Server. For simplicity, cURL commands are used in this example to send CRUD requests to the REST endpoints of Identity Server.

To execute these commands, you need to Download the WSO2 Identity Server, unzip it and run it.

These endpoints are exposed over HTTPS since sensitive information is exchanged and also protected with Basic Auth Authentication.

The following requests use Basic Auth authentication to demonstrate sending requests to the REST endpoints of WSO2 Identity Server as a quick start. In a production environment, we recommend that you use OAuth Authentication instead. For instructions, see Setting Up Service Provider for Inbound Provisioning.

Before you begin working with SCIM APIs, make sure that the following UserStoreManager configuration is set in the <IS_HOME>/repository/conf/user-mgt.xml file.

<Property name="SCIMEnabled">true</Property>

  • Create User: The following command can be used to create a user.

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} --data '{"schemas":[],"name":{"familyName":"{FAMILY_NAME}","givenName":"{FIRST_NAME}"},"userName":"{USERNAME}","password":"{PASSWORD}","emails":[{"primary":true,"value":"{HOME_EMAIL}","type":"home"},{"value":"{WORK_EMAIL}","type":"work"}]}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Users
    Request: Sample
    curl -v -k --user admin:admin --data '{"schemas":[],"name":{"familyName":"gunasinghe","givenName":"hasinitg"},"userName":"hasinitg","password":"hasinitg","emails":[{"primary":true,"value":"hasini_home.com","type":"home"},{"value":"hasini_work.com","type":"work"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users

    In this request, authentication is done using Basic Auth and the payload is sent in JSON format adhering to the SCIM 1.1 specification. You receive a response with 201 CREATED status and the payload response as follows:

    Response
    {"id":"0032fd29-55a9-4fb9-be82-b1c97c073f02","schemas":["urn:scim:schemas:core:1.0"],"name":{"familyName":"gunasinghe","givenName":"hasinitg"},"userName":"hasinitg","emails":[{"value":"hasini_home.com","type":"home"},{"value":"hasini_work.com","type":"work"}],"meta":{"lastModified":"2016-01-26T16:46:53","location":"https://localhost:9443/wso2/scim/Users/0032fd29-55a9-4fb9-be82-b1c97c073f02","created":"2016-01-26T16:46:53"}}

    Some additional attributes such as, unique_id, created, lastModified and location are READ ONLY attributes and are set by the service provider.

    Do the following to test this.

    • Log in to the WSO2 Identity Server management console using admin credentials (admin/admin).
    • Click List under the Users and Roles section on the Main tab and then select Users. You will see that the user created above is listed. 
    • Click on User Profile to view the user profile of the user you created. You will see that only the user's first and last names have been set properly but the other fields remain empty. This is because the Carbon platform uses a different set of attributes in LDAP than the SCIM specific dialect. However, those attributes are stored in the underlying user store. You can verify this using a GET request on the particular user.

  • GET User: You can retrieve a particular user resource using its unique id (You will get this id in the response to the create user request):

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} https://{IS_IP}:{IS_PORT}/wso2/scim/Users/{SCIM_USER_ID}
    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Users/0032fd29-55a9-4fb9-be82-b1c97c073f02

    The response consists of all attributes that were sent.

    Alternatively, you can log in as a user and use the Users/me SCIM endpoint to retrieve data of the currently logged-in user: 


    curl -v -k --user hasinitg:hasinitg https://localhost:9443/wso2/scim/Users/me

    For this command, the user credentials of the user created above (hasinitg) were used as an example. Also note that , to run this command, the user should be assigned to a role that has admin privileges.

  • List Users: Now create some users through the WSO2 Identity Server management console and fill in their profile details. The following code snippets show the response received after a new user called "pulasthim" was created and the user profile was updated.  

    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Users

    You will receive the following response.

    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"totalResults":2,"Resources":[{"id":"0032fd29-55a9-4fb9-be82-b1c97c073f02","userName":"hasinitg","meta":{"lastModified":"2016-01-26T16:46:53","created":"2016-01-26T16:46:53","location":"https://localhost:9443/wso2/scim/Users/0032fd29-55a9-4fb9-be82-b1c97c073f02"}},{"id":"b228b59d-db19-4064-b637-d33c31209fae","userName":"pulasthim","meta":{"lastModified":"2016-01-26T17:00:33","created":"2016-01-26T17:00:33","location":"https://localhost:9443/wso2/scim/Users/b228b59d-db19-4064-b637-d33c31209fae"}}]}

    You can see the representation of the three users with attributes in JSON format adhering to SCIM Schema.

  • Update User: Update the work and home email fields of the user "hasinitg" through the following cURL command:

    Note: You have to use the correct SCIM ID by taking it either from the "create user" response or from the "list user" response.

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD}  -X PUT -d '{"schemas":[],"name":{"familyName":"{LAST_NAME}","givenName":"{FIRST_NAME"},"userName":"{USERNAME","emails": "{EMAIL"}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Users/{SCIM_USER_ID}
    Request: Sample
    curl -v -k --user admin:admin -X PUT -d '{"schemas":[],"name":{"familyName":"gunasinghe","givenName":"hasinitg"},"userName":"hasinitg","emails":[{"value":"hasini@wso2.com","type":"work"},{"value":"hasi7786@gmail.com","type":"home"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users/0032fd29-55a9-4fb9-be82-b1c97c073f02

    You receive a 200 OK response and a payload containing the updated user representation.

    Alternatively, you can use the Users/me SCIM endpoint to update the user profile of the currently logged-in user:


    curl -v -k --user hasinitg:hasinitg -X PUT -d '{"schemas":[],"name":{"familyName":"gunasinghe","givenName":"hasinitg"},"userName":"hasinitg","emails":[{"value":"hasini@wso2.com","type":"work"},{"value":"hasi7786@gmail.com","type":"home"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users/me

    For this command, the user credentials of the user created above (hasinitg) were used as an example.

    Updating a resource using PATCH request

    You can also update a resource using a PATCH request. Unlike the PUT request (which completely replaces or overwrites the attributes), the PATCH modifies only the existing resource. The sample cURL command for a PATCH request is given below:

    Request: Sample
    request:
curl -v -k --user admin:admin -X PATCH -d '{"schemas": ["urn:scim:schemas:core:1.0"],"name":
{"familyName": "Tester"},"userName": "hasinitg","meta": {"attributes": []}}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users/15722a71-3bd1-4864-8460-1e63a2dace65
    Response
    200 OK
{"emails":[
{"type":"home","value":"hasini_home.com"},
{"type":"work","value":"hasini_work.com"}],"meta":
{"created":"2017-08-16T10:07:36","location":"https://localhost:9443/wso2/scim/Users/15722a71-3bd1-4864-8460-1e63a2dace65","lastModified":"2017-08-16T12:17:11"},"schemas":["urn:scim:schemas:core:1.0"],"name":
{"familyName":"Tester","givenName":"hasinitg"},"id":"15722a71-3bd1-4864-8460-1e63a2dace65","userName":"hasinitg"}


  • Delete User: Delete the user with username 'pulasthim' that was created through the WSO2 Identity Server management console. 

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} -X DELETE https://{IS_IP}:{IS_PORT}/wso2/scim/Users/{SCIM_USER_ID} -H "Accept: application/json"
    Request: Sample
    curl -v -k --user admin:admin -X DELETE https://localhost:9443/wso2/scim/Users/b228b59d-db19-4064-b637-d33c31209fae -H "Accept: application/json"

    You receive a response with status 200 OK and the user will be deleted from the user store. Similarly, you can manage groups by performing CRUD operations on the Group resource endpoint.


  • Filter User: Since CRUD operations should be performed using SCIM ID which is unique to the service provider, the user REST endpoint also supports the filter operation. You can filter users based on their username, which is considered the unique user attribute in Carbon servers. You can use the following cURL command. WSO2 Identity Server currently supports only equal operation in filtering.

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} https://{IS_IP}:{IS_PORT}/wso2/scim/Users?filter={VALUE_TO_BE_CHECKED}+Eq+%22{VALUE_TO_BE_EQUAL}%22
    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Users?filter=userName+Eq+%22hasinitg%22

    You receive a response similar to the one below from which you can extract the SCIM ID to perform the rest of the operations.

    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"totalResults":1,"Resources":[{"id":"0032fd29-55a9-4fb9-be82-b1c97c073f02","userName":"hasinitg","meta":{"lastModified":"2016-01-26T18:26:04","created":"2016-01-26T16:46:53","location":"https://localhost:9443/wso2/scim/Users/0032fd29-55a9-4fb9-be82-b1c97c073f02"}}]}

  • Create Group: You can create groups either with or without members. The following command creates a group with a user.

    Note: When creating a group with users, you need to have that user already existing in the user store and provide its unique id. Create a new group named: 'engineer' with the user 'hasinitg' as a member. The attributes you have to include in the cURL command are the userID, username:password.

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} --data '{"displayName": {GROUP_NAME},"members": {MEMBERS_OF_THE_GROUP}}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Groups
    Request: Sample
    curl -v -k --user admin:admin --data '{"displayName": "engineer","members": [{"value":"316214c0-dd7e-4dc3-bed8-e91227d32597","display": "hasinitg"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups

    You receive a response with the payload as indicated below and a response status 201 CREATED:

    Response
    {"id":"b4f9bccf-4f79-4288-be21-78e0d4500714","schemas":["urn:scim:schemas:core:1.0"],"displayName":"PRIMARY/engineer","members":[{"value":"0032fd29-55a9-4fb9-be82-b1c97c073f02","display":"hasinitg"}],"meta":{"lastModified":"2016-01-26T18:31:57","created":"2016-01-26T18:31:57","location":"https://localhost:9443/wso2/scim/Groups/b4f9bccf-4f79-4288-be21-78e0d4500714"}}

    Check the management console. You can see the new group is listed under roles and user 'adam' is listed under users of that group.

  • List Groups: Now create another role through the Identity Server Management Console and list all the groups. Create a group named: 'manager' without any users added to it. The following command lists the groups. 

    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Groups

    When you list the groups you can see both groups are listed.

    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"totalResults":2,"Resources":[{"id":"b4f9bccf-4f79-4288-be21-78e0d4500714","displayName":"PRIMARY/engineer","meta":{"lastModified":"2016-01-26T18:31:57","created":"2016-01-26T18:31:57","location":"https://localhost:9443/wso2/scim/Groups/b4f9bccf-4f79-4288-be21-78e0d4500714"}},{"id":"484cdc26-9136-427b-ad9e-96ea3082e1f5","displayName":"PRIMARY/manager","meta":{"lastModified":"2016-01-26T18:33:33","created":"2016-01-26T18:33:33","location":"https://localhost:9443/wso2/scim/Groups/484cdc26-9136-427b-ad9e-96ea3082e1f5"}}]}

  • Update Group: Rename the group "manager" to "executive":

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} -X PATCH -d '{"displayName": {GROUP_NAME}}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Groups/{SCIM_GROUP_ID}
    Request: Sample
    curl -v -k --user admin:admin -X PATCH -d '{"displayName": "executive"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups/484cdc26-9136-427b-ad9e-96ea3082e1f5

    You receive a response with 200 OK status and full JSON representation of the updated group.


  • Delete Group: You can delete the group using the unique SCIM Id of the group. The following command deletes the group: 'executive'.

    Request
    curl -v -k --user {IS_USERNAME}:{IS_PASSWORD} -X DELETE https://{IS_IP}:{IS_PORT}/wso2/scim/Groups/{SCIM_GROUP_ID} -H "Accept: application/json"
    Request: Sample
    curl -v -k --user admin:admin -X DELETE https://localhost:9443/wso2/scim/Groups/484cdc26-9136-427b-ad9e-96ea3082e1f5 -H "Accept: application/json"

  • Filter Group: You can filter groups with the group display name using one of the following commands. These commands filter the group with display name: 'engineer'.

    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Groups?filter=displayName+Eq+%22engineer%22

    OR

    Request: Sample
    curl -v -k --user admin:admin https://localhost:9443/wso2/scim/Groups?filter=displayNameEqengineer

    The following is the response you would get.

    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"totalResults":1,"Resources":[{"id":"b4f9bccf-4f79-4288-be21-78e0d4500714","displayName":"PRIMARY/engineer","meta":{"lastModified":"2016-01-26T18:31:57","created":"2016-01-26T18:31:57","location":"https://localhost:9443/wso2/scim/Groups/b4f9bccf-4f79-4288-be21-78e0d4500714"}}]}

Now, you can use the above commands or similar in a sample scenario.

Using the SCIM API

This sample scenario is to add users and groups to a super tenant and a normal tenant so that the users are unique to their domains.

For the super tenant:

  • Create group AMRSNGHE/ngioletGR - This will create a group in a given user store domain.

    Request
    curl -k --user {IS_USERNAME}:{IS_PASSWORD} --data '{"displayName": "{USER_STORE_DOMAIN}/{GROUP_NAME}"}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Groups
    Request: Sample
    curl -k --user admin:admin --data '{"displayName": "AMRSNGHE/ngioletGR"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups
    Response
    {"id":"8ee9253e-4fe1-4863-9641-80d807611707","schemas":["urn:scim:schemas:core:1.0"],"displayName":"AMRSNGHE/ngioletGR","meta":{"lastModified":"2015-04-30T10:18:33","created":"2015-04-30T10:18:33","location":"https://localhost:9443/wso2/scim/Groups/8ee9253e-4fe1-4863-9641-80d807611707"}}

  • Create user AMRSNGHE/groupUSR001 - This will create a user in a given user store domain.

    Request
    curl -k --user {IS_USERNAME}:{IS_PASSWORD} --data '{"schemas":[],"name":{"familyName": "{LAST_NAME}","givenName":"{FIRST_NAME"},"userName":"{USER_STORE_DOMAIN}/{USERNAME}","password":"{PASSWORD"}' --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Users
    Request: Sample
    curl -k --user admin:admin --data '{"schemas":[],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR001","password":"testPwd123"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users
    Response
    {"id":"bbda8f2f-fea7-4a9c-9128-f1e0c3aad475","schemas":["urn:scim:schemas:core:1.0"],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR001","meta":{"lastModified":"2015-04-30T10:19:05","location":"https://localhost:9443/wso2/scim/Users/bbda8f2f-fea7-4a9c-9128-f1e0c3aad475","created":"2015-04-30T10:19:05"}}

  • Create user AMRSNGHE/groupUSR002

    Request: Sample
    curl -k --user admin:admin --data '{"schemas":[],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR002","password":"testPwd123"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users
    Response
    {"id":"e04e20ca-6321-4c75-88b9-cfa5a600e356","schemas":["urn:scim:schemas:core:1.0"],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR002","meta":{"lastModified":"2015-04-30T10:19:14","location":"https://localhost:9443/wso2/scim/Users/e04e20ca-6321-4c75-88b9-cfa5a600e356","created":"2015-04-30T10:19:14"}}

  • Add user AMRSNGHE/groupUSR001 to group AMRSNGHE/ngioletGR - This will add the user to the group.

    Request
    curl -k --user {IS_USERNAME}:{IS_PASSWORD} -X PATCH -d '{"displayName": "AMRSNGHE/ngioletGR","members": [{"value":"{id returned in the response when creating the AMRSNGHE/groupUSR001}","display": "AMRSNGHE/groupUSR001"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups/{id returned in the response when creating the group AMRSNGHE/ngioletGR}

  • Add user AMRSNGHE/groupUSR002 to group AMRSNGHE/ngioletGR

    Request
    curl -k --user {IS_USERNAME}:{IS_PASSWORD} -X PATCH -d "{"displayName": "AMRSNGHE/ngioletGR","members": [{"value":"{id returned in the response when creating the AMRSNGHE/groupUSR002}","display": "AMRSNGHE/groupUSR002"}]}" --header "Content-Type:application/json" https://{IS_IP}:{IS_PORT}/wso2/scim/Groups/{id returned in the response when creating the group AMRSNGHE/ngioletGR}

  • List the group members - This will list all the members in the group.

    Request
    curl -k --user {IS_USERNAME}:{IS_PASSWORD}  https://{IS_IP}:{IS_PORT}/wso2/scim/Groups/{id returned in the response when creating the group AMRSNGHE/ngioletGR}

For a tenant amrsnghe.org:

  • Create group AMRSNGHE/ngioletGR

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adming --data '{"displayName": "AMRSNGHE/ngioletGR"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups
    Response
    {"id":"8ee9253e-4fe1-4863-9641-80d807611707","schemas":["urn:scim:schemas:core:1.0"],"displayName":"AMRSNGHE/ngioletGR","meta":{"lastModified":"2015-04-30T10:18:33","created":"2015-04-30T10:18:33","location":"https://localhost:9443/wso2/scim/Groups/8ee9253e-4fe1-4863-9641-80d807611707"}}

  • Create user AMRSNGHE/groupUSR001

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adming --data '{"schemas":[],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR001","password":"testPwd123"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users
    Response
    {"id":"bbda8f2f-fea7-4a9c-9128-f1e0c3aad475","schemas":["urn:scim:schemas:core:1.0"],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR001","meta":{"lastModified":"2015-04-30T10:19:05","location":"https://localhost:9443/wso2/scim/Users/bbda8f2f-fea7-4a9c-9128-f1e0c3aad475","created":"2015-04-30T10:19:05"}}

  • Create user AMRSNGHE/groupUSR002

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adming --data '{"schemas":[],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR002","password":"testPwd123"}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Users
    Response
    {"id":"e04e20ca-6321-4c75-88b9-cfa5a600e356","schemas":["urn:scim:schemas:core:1.0"],"name":{"familyName":"John","givenName":"Doe"},"userName":"AMRSNGHE/groupUSR002","meta":{"lastModified":"2015-04-30T10:19:14","location":"https://localhost:9443/wso2/scim/Users/e04e20ca-6321-4c75-88b9-cfa5a600e356","created":"2015-04-30T10:19:14"}}

  • Add user AMRSNGHE/groupUSR001 to group AMRSNGHE/ngioletGR

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adming -X PATCH -d '{"displayName": "AMRSNGHE/ngioletGR","members": [{"value":"<id returned in the response when creating the AMRSNGHE/groupUSR001>","display": "AMRSNGHE/groupUSR001"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups/<id returned in the response when creating the group AMRSNGHE/ngioletGR>

  • Add user AMRSNGHE/groupUSR002 to group AMRSNGHE/ngioletGR

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adming -X PATCH -d '{"displayName": "AMRSNGHE/ngioletGR","members": [{"value":"<id returned in the response when creating the AMRSNGHE/groupUSR002>","display": "AMRSNGHE/groupUSR002"}]}' --header "Content-Type:application/json" https://localhost:9443/wso2/scim/Groups/<id returned in the response when creating the group AMRSNGHE/ngioletGR>

  • List the group members

    Request: Sample
    curl -k --user gayashan@amrsnghe.org:adminghttps://localhost:9443/wso2/scim/Groups/<id returned in the response when creating the group AMRSNGHE/ngioletGR>

SCIM bulk operations

The WSO2 Identity Server exposes SCIM endpoint  /Bulk to do bulk operations using SCIM.

  • Create Users: This creates a bulk of users at the same time.

    Request: Sample
    curl -v -k --user admin:admin -H "Accept: application/json" -H "Content-type: application/json" -X POST -d "{\"failOnErrors\":2,\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"Operations\":[{\"data\":{\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"path\":\"/Users\",\"userName\":\"hasini\",\"method\":\"POST\",\"emails\":[{\"value\":\"hasini@gmail.com\"},{\"value\":\"hasinig@yahoo.com\"}],\"phoneNumbers\":[{\"value\":\"0772508354\"}],\"displayName\":\"Hasini\",\"externalId\":\"hasini@wso2.com\",\"password\":\"dummyPW1\",\"preferredLanguage\":\"Sinhala\",\"bulkId\":\"bulkIDUser1\"},\"path\":\"/Users\",\"method\":\"POST\",\"bulkId\":\"bulkIDUser1\"},{\"data\":{\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"path\":\"/Users\",\"userName\":\"dinuka\",\"method\":\"POST\",\"emails\":[{\"value\":\"dinuka.malalanayake@gmail.com\"},{\"value\":\"dinuka_malalanayake@yahoo.com\"}],\"phoneNumbers\":[{\"value\":\"0772508354\"}],\"displayName\":\"Dinuka\",\"externalId\":\"dinukam@wso2.com\",\"password\":\"myPassword\",\"preferredLanguage\":\"Sinhala\",\"bulkId\":\"bulkIDUser2\"},\"path\":\"/Users\",\"method\":\"POST\",\"bulkId\":\"bulkIDUser2\"}]}" https://localhost:9443/wso2/scim/Bulk
    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"Operations":[{"status":{"code":"201"},"location":"https://localhost:9443/wso2/scim/Users/bcbc6fed-6519-4eeb-a1ff-9b643fdab1b5","method":"POST","bulkId":"bulkIDUser1"},{"status":{"code":"201"},"location":"https://localhost:9443/wso2/scim/Users/ce6cf606-c4de-4260-bfdf-a751161eeae0","method":"POST","bulkId":"bulkIDUser2"}]}

  • Create Groups: This creates a bulk of groups at the same time. 

    Request: Sample
    curl -v -k --user admin:admin -H "Accept: application/json" -H "Content-type: application/json" -X POST -d "{\"failOnErrors\":2,\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"Operations\":[{\"data\":{\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"path\":\"/Groups\",\"method\":\"POST\",\"displayName\":\"engineer\",\"externalId\":\"engineer\",\"members\":[{\"value\":\"b1b03cf2-470f-4a73-b517-ae4faed8e61b\"},{\"value\":\"8e2c7178-e5bf-4013-b526-1193e0611d9a\"}],\"bulkId\":\"bulkGroup1\"},\"path\":\"/Groups\",\"method\":\"POST\",\"bulkId\":\"bulkGroup1\"},{\"data\":{\"schemas\":[\"urn:scim:schemas:core:1.0\"],\"path\":\"/Groups\",\"method\":\"POST\",\"displayName\":\"doctor\",\"externalId\":\"doctor\",\"members\":[{\"value\":\"8e2c7178-e5bf-4013-b526-1193e0611d9a\"},{\"value\":\"b1b03cf2-470f-4a73-b517-ae4faed8e61b\"}],\"bulkId\":\"bulkGroup2\"},\"path\":\"/Groups\",\"method\":\"POST\",\"bulkId\":\"bulkGroup2\"}]}" https://localhost:9443/wso2/scim/Bulk
    Response
    {"schemas":["urn:scim:schemas:core:1.0"],"Operations":[{"status":{"code":"201"},"location":"https://localhost:9443/wso2/scim/Groups/6f008b6c-e990-4f67-9048-0fbcb3b52d5c","method":"POST","bulkId":"bulkGroup1"},{"status":{"code":"201"},"location":"https://localhost:9443/wso2/scim/Groups/1b7c44a8-26b8-4e81-9961-26d90fe68ac5","method":"POST","bulkId":"bulkGroup2"}]}