This site contains the documentation that is relevant to older WSO2 product versions and offerings.
For the latest WSO2 documentation, visit https://wso2.com/documentation/.

Request Object Support

Purpose of Request Object in OpenID Connect

This enables sending authentication request parameters in a self-contained JWT instead of plain request parameters. Request Object can be specified to the authorization server either by value or by reference.

  1. Request Object by Value (as request parameter)

    • The request authorization request parameter enables OpenID Connect requests to be passed in a single, self-contained parameter and has to be optionally signed and/or encrypted. It represents the request as a JWT whose claims are the request parameters. This JWT is called a Request Object.

    • IS-5.5.0 has inbuilt support for passing Request Object by value.


  2. Request Object by Reference (as request_uri parameter )

    • The request_uri authorization request parameter enables OpenID Connect requests to be passed by reference, rather than by value. This parameter is used identically to the request parameter, other than that the Request Object value is retrieved from the resource at the specified URL.

    • WSO2 Identity Server 5.5.0 does not support passing Request Object by Reference. However, an extension point is provided which can be extended to provide support for understanding Request Object from reference URI specified by request_uri.


Request Object by Value
As mentioned above, the main purpose of this parameter is for supporting to request some claims other than the default Userinfo and IdToken claim set which is associated with the requested scope. Now, let us consider the following sample request that contains a JWT as the request parameter value.


https://localhost:9443/oauth2/authorize?
    response_type=code%20id_token
    &client_id=s6BhdRkqt3
    &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb
    &scope=openid
    &state=af0ifjsldkj
    &nonce=n-0S6_WzA2Mj
    &request=eyJhbGciOiJSUzI1NiIsImtpZCI6ImsyYmRjIn0.ew0KICJpc3MiOiA
    iczZCaGRSa3F0MyIsDQogImF1ZCI6ICJodHRwczovL3NlcnZlci5leGFtcGxlLmN
    vbSIsDQogInJlc3BvbnNlX3R5cGUiOiAiY29kZSBpZF90b2tlbiIsDQogImNsaWV
    udF9pZCI6ICJzNkJoZFJrcXQzIiwNCiAicmVkaXJlY3RfdXJpIjogImh0dHBzOi8
    vY2xpZW50LmV4YW1wbGUub3JnL2NiIiwNCiAic2NvcGUiOiAib3BlbmlkIiwNCiA
    ic3RhdGUiOiAiYWYwaWZqc2xka2oiLA0KICJub25jZSI6ICJuLTBTNl9XekEyTWo
    iLA0KICJtYXhfYWdlIjogODY0MDAsDQogImNsYWltcyI6IA0KICB7DQogICAidXN
    lcmluZm8iOiANCiAgICB7DQogICAgICJnaXZlbl9uYW1lIjogeyJlc3NlbnRpYWw
    iOiB0cnVlfSwNCiAgICAgIm5pY2tuYW1lIjogbnVsbCwNCiAgICAgImVtYWlsIjo
    geyJlc3NlbnRpYWwiOiB0cnVlfSwNCiAgICAgImVtYWlsX3ZlcmlmaWVkIjogeyJ
    lc3NlbnRpYWwiOiB0cnVlfSwNCiAgICAgInBpY3R1cmUiOiBudWxsDQogICAgfSw
    NCiAgICJpZF90b2tlbiI6IA0KICAgIHsNCiAgICAgImdlbmRlciI6IG51bGwsDQo
    gICAgICJiaXJ0aGRhdGUiOiB7ImVzc2VudGlhbCI6IHRydWV9LA0KICAgICAiYWN
    yIjogeyJ2YWx1ZXMiOiBbInVybjptYWNlOmluY29tbW9uOmlhcDpzaWx2ZXIiXX0
    NCiAgICB9DQogIH0NCn0.nwwnNsk1-ZkbmnvsF6zTHm8CHERFMGQPhos-EJcaH4H
    h-sMgk8ePrGhw_trPYs8KQxsn6R9Emo_wHwajyFKzuMXZFSZ3p6Mb8dkxtVyjoy2
    GIzvuJT_u7PkY2t8QU9hjBcHs68PkgjDVTrG1uRTx0GxFbuPbj96tVuj11pTnmFC
    UR6IEOXKYr7iGOCRB3btfJhM0_AKQUfqKnRlrRscc8Kol-cSLWoYE9l5QqholImz
    jT_cMnNIznW9E7CDyWXTsO70xnB4SkG6pXfLSjLLlxmPGiyon_-Te111V8uE83Il
    zCYIb_NMXvtTIVc1jpspnTSD7xMbpL-2QgwUsAlMGzw

The payload of the above sample Request Object is as follows:

{
  "iss": "s6BhdRkqt3",
  "aud": "https://server.example.com",
  "response_type": "code id_token",
  "client_id": "s6BhdRkqt3",
  "redirect_uri": "https://client.example.org/cb",
  "scope": "openid",
  "state": "af0ifjsldkj",
  "nonce": "n-0S6_WzA2Mj",
  "max_age": 86400,
  "claims": {
    "userinfo": {
      "given_name": {
        "essential": true
      },
      "nickname": null,
      "email": {
        "essential": true
      },
      "email_verified": {
        "essential": true
      },
      "picture": null
    },
    "id_token": {
      "gender": null,
      "birthdate": {
        "essential": true
      },
      "acr": {
        "values": [
          "urn:mace:incommon:iap:silver"
        ]
      }
    }
  }
}

If the above request is sent, it requests some claims from both the members userinfo endpoint and id_token. For example, 'given_name' and 'email' are marked as essential claims from user info endpoint and 'brithdate' is requested as an essential claim from id token. 

Usually, in OpenID Connect, the returning claims will be filtered from the requested scopes that are passed to the server as a query parameter with the authorization request. When it comes to WSO2 Identity Server, it filters the requested claims both from the requested scopes defined with the authorization request and the requested claims that can be configured in service provider configurations. But if the Request Object is associated with the authorization request, the server returns the essential request object claims in the response of userinfo endpoint and id_token accordingly.


The following validations is done on the server side.
  1. The client_id and response_type of the request object (if present) should be equal to the client_id and the response_type of the authorization request.
  2. The authorization request query parameters will be overridden from the Request Object values if they are present in the Request Object.
  3. Both the request and request_uri parameters cannot be associated with the same authorization request.
  4. Even if a scope parameter is present in the Request Object value, a scope parameter MUST always be passed using the OAuth 2.0 request syntax containing the openid scope value to indicate the underlying OAuth 2.0 logic that this is an OpenID Connect request. (For further validation information, refer OIDC specification)

The Identity Server will respond to the above sample request as follows:
  1. Here the requested scope is considered as 'openid email' as the scope value of the request object is declared. So the server will ignore the scope value which is associated with the authorization request and considers the requested scope as 'openid email'
  2. It considers the claims "given_name" and "email" which are marked as 'essential:true' for 'userinfo' member. Even if they are not mapped with the openid or address scope in the registry, if these claims are requested claims, then 'given_name' and 'email' will be returned from the Userinfo endpoint. In a nutshell, the claims which are marked as 'essential: true' only get controlled by the requested claims and ignore the requested scopes. If the server cannot provide those essential claims, there will not be any failure or error message returning from the server.
  3. The claims like "nickname" it will act as a default claim and will be controlled by both requested scopes and the requested claims.
  4. If the server cannot provide the requested essential claims, the server will return null for the specific claim and the flow will not break.

This behavior is common to the id token as well

You can try out the sample listed in Passing OIDC Authentication Request Parameters in a Request Object page to see how request objects work in IS. 

Signature Validation
Request Object may be signed or unsigned (plaintext). When it is plaintext, this is indicated by use of the non-algorithm [JWA]. If the Request Object is signed, the server will extract the certificate by the client_id. When registering the Auth application in the Identity Server, we need to provide the corresponding public certificate of the Request Object signing party. As of now, the Identity Server only supports RSA signature algorithms only. If the header does not contain valid signature algorithm, the server will reject the signature validation. Based on the certificate value, it will generate the public key and validate the signature using the nimbus library. 
Decryption
The request parameter value can be even a JWE. If it is a JWE, it will consist of five parts which are separated by four '.'  characters which are JOSE header, JWE encrypted key, Initialization vector, Ciphertext, and Authentication tag. The values of these five sections can be seen by doing a base64 encoding. JOSE header consists of 'alg' and 'enc' values. An algorithm defined in 'enc' is used to do the content encryption while the algorithm defined in the 'alg' is used to do the key wrapping. Here, the nimbus library is used for the decryption by providing the Identity Server's private key. 

If the Request Object is a nested JWT, which is signed and encrypted, then the payload (Cipher Text) of the Request Object is a signed JWT. So the server will decrypt the JWE first and then check the payload for signature validation.

Extension Points
All the validations and the request object builder are extensible so that a third party user can build the request object and do any validations in their own way. At the moment, Identity Server does not have a default implementation for request_uri parameter and instead, it extracts the request_uri parameter from the request object and pass it.
So externally, a user can implement a CustomRequestObjectBuilder (by implementing org.wso2.carbon.identity.openidconnect.RequestObjectBuilder) to obtain the Request Object from request_uri parameter and do the necessary customizations.

The following configuration changes should be done in $IS_HOME/repository/conf/identity/identity.xml when writing extension points for this feature.


 <OpenIDConnect>
  <RequestObjectBuilders>
     <RequestObjectBuilder>
        <Type>request_param_value_builder</Type>
  		<ClassName>org.wso2.carbon.identity.openidconnect.RequestParamRequestObjectBuilder</ClassName>
     </RequestObjectBuilder>
  </RequestObjectBuilders>
  <RequestObjectValidator>org.wso2.carbon.identity.openidconnect.RequestObjectValidatorImpl</RequestObjectValidator>
  </OpenIDConnect>

If the configuration is not present, the default classes will be executed. 


Please note that Identity Server 5.5.0 does not have a default implementation for request_uri parameter.

If you implement a CustomRequestObjectBuilder to obtain Request Object from request_uri, you need to register it as a new RequestObjectBuilder, in $IS_HOME/repository/conf/identity/identity.xml.

 <OpenIDConnect>
  <RequestObjectBuilders>
   ....
  <RequestObjectBuilder>
     <Type>request_uri_param_value_builder</Type>
     <ClassName>xxx.CustomRequestObjectBuilder</ClassName>
  </RequestObjectBuilder>
  ...
  </OpenIDConnect>