The content in this documentation is for older versions of WSO2 products. For updated information on Enterprise Integration Patterns, go to the latest Micro Integrator documentation. "> The content in this documentation is for older versions of WSO2 products. For updated information on Enterprise Integration Patterns, go to the latest Micro Integrator documentation.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

This section explains, through an example scenario, how the Transactional Client EIP can be implemented using WSO2 ESB. The following topics are covered:

Introduction to Transactional Client

The Transactional Client EIP controls its transactions with the messaging system. It makes the client’s session with the messaging system transactional so that the client can specify transaction boundaries. For more information, refer to http://www.eaipatterns.com/TransactionalClient.html.

Figure 1: Transactional Client EIP

Example scenario

In many business scenarios, there can be data losses when transferring from one section to another, due to crashes and other interruptions. This example scenario demonstrates how messages containing the MESSAGE_COUNT value (MESSAGE_COUNT=1) are assumed to be causing a failure in mediation, and how to transactions guarantee that data will not be lost.

There are two ways to implement transaction in WSO2 ESB as follows.

The ESB can control transactional behavior with a JMS queue, and by simulating the Transactional Client EAI pattern. For information on Transactions in WSO2 ESB, refer to section Transactional ESB in WSO2 ESB documentation.

The diagram below depicts how to simulate the example scenario using the WSO2 ESB.

Figure 2: Example Scenario of the Transactional Client EIP

Before digging into implementation details, let's take a look at the relationship between the example scenario and the Transactional Client EIP by comparing their core components.

Figure 1: Transactional Client EIPFigure 2: Transactional Client Example Scenario
Transactional ProducerProxy Service inSequence
MessageSimple Stock Quote Request
Transactional ConsumerSimple Stock Quote Service

Environment setup

  1. Download an install the WSO2 ESB from http://wso2.com/products/enterprise-service-bus. For a list of prerequisites and step-by-step installation instructions, refer to Getting Started in the WSO2 ESB documentation. 
  2. Download and install a JMS server. We use ActiveMQ as the JMS provider in this example.    
  3. In order to enable the JMS transport, edit <ESB_HOME>/repository/conf/axis2/axis2.xml as follows.
    • Uncomment the Axis2 t ransport listener configuration for ActiveMQ as follows:
      <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">...
     

    • Set the transport.jms.SessionTransacted parameter to true. After making this update, the transportReceiver section in axis2.xml should look as follows:

      <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
        <parameter name="myQueueConnectionFactory" locked="false">
            <parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
            <parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
            <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
        	<parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
        	<parameter name="transport.jms.SessionTransacted">true</parameter>
        </parameter>

        <parameter name="default" locked="false">
            <parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
            <parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
            <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
            <parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
			<parameter name="transport.jms.SessionTransacted">true</parameter>
        </parameter>
</transportReceiver>
    • Uncomment the Axis2 transport sender configuration as follows:
       
      <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/>  
  4. Copy the following ActiveMQ client jar files to <ESB_HOME>/repository/components/lib directory. It allows the ESB to connect to the JMS provider.
    • activemq-core-5.2.0.jar
    • geronimo-j2ee-management_1.0_spec-1.0.jar
     
  5. You need to add a custom mediator called MessageCounterMediator. Download MessageCounterMediator file and place it in <ESB_HOME>/repository/components/lib folder. To learn how to write custom mediators, refer to Writing Custom Mediator Implementations guide in WSO2 ESB documentation.
  6. Start the ActiveMQ (or equivalent JMS Server) and WSO2 ESB.
  7. Start the sample Axis2 server. For instructions, refer to section ESB Samples Setup - Starting Sample Back-End Services in the WSO2 ESB documentation.

ESB configuration

Start the ESB server and log into its management console UI (https: //localhost:9443/carbon ). In the management console, navigate to Main Menu, click Service Bus and then Source View. Next, copy and paste the following configuration, which helps you explore the example scenario, to the source view. 

<definitions xmlns="http://ws.apache.org/ns/synapse">
   <proxy name="StockQuoteProxy" startOnLoad="true" trace="disable">      
      <target>
         <inSequence>
			<!-- Setting MESSAGE_COUNT value -->
            <class name="org.wso2.esb.client.MessageCounterMediator"/>
            <log level="full">
               <property name="MESSAGE*ID" expression="get-property('MESSAGE_COUNT')"/>
            </log>
            <switch source="get-property('MESSAGE_COUNT')">
               <case regex="1">
					<!-- Undesired MESSAGE_COUNT value -->
                  <property name="SET_ROLLBACK_ONLY" value="true" scope="axis2"/>
                  <log level="custom">
                     <property name="Transaction Action" value="Rollbacked"/>
                  </log>
               </case>
               <default>
                  <log level="custom">
                     <property name="Transaction Action" value="Committed"/>
                  </log>
                  <send>
                     <endpoint name="proxy_endpoint">
                        <address uri="http://localhost:9000/services/SimpleStockQuoteService"/>
                     </endpoint>
                  </send>
               </default>
            </switch>
            <property name="OUT_ONLY" value="true"/>
         </inSequence>
      </target>
      <publishWSDL uri="file:repository/samples/resources/proxy/sample_proxy_1.wsdl"/>
      <parameter name="transport.jms.ContentType">
         <rules>
            <jmsProperty>contentType</jmsProperty>
            <default>application/xml</default>
         </rules>
      </parameter>
   </proxy>  
   <sequence name="main">
      <log/>
      <drop/>
   </sequence>
</definitions>

Simulating the sample scenario

Use the jmsclient that comes with WSO2 ESB by default, to send messages to JMS Queue in ActiveMQ as follows:

ant jmsclient -Djms_type=pox -Djms_dest=dynamicQueues/StockQuoteProxy -Djms_payload=WSO2

Note in the console of WSO2 ESB that the first attempt will rollback and the second attempt will be committed.

[2012-10-26 22:55:32,520]  INFO - LogMediator To: , MessageID: ID:buddhima-pc-59457-1351272332247-1:1:1:1:1, Direction: request, MESSAGE*ID = 1, Envelope: <?xml version='1.0' encoding='utf-8'?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><m:placeOrder xmlns:m="http://services.samples">
    <m:order>
        <m:price>87.63805687450525</m:price>
        <m:quantity>18427</m:quantity>
        <m:symbol>WSO2</m:symbol>
    </m:order>
</m:placeOrder></soapenv:Body></soapenv:Envelope>
[2012-10-26 22:55:32,521]  INFO - LogMediator Transaction Action = Rollbacked

[2012-10-26 22:55:33,541]  INFO - LogMediator To: , MessageID: ID:buddhima-pc-59457-1351272332247-1:1:1:1:1, Direction: request, MESSAGE*ID = 2, Envelope: <?xml version='1.0' encoding='utf-8'?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><m:placeOrder xmlns:m="http://services.samples">
    <m:order>
        <m:price>87.63805687450525</m:price>
        <m:quantity>18427</m:quantity>
        <m:symbol>WSO2</m:symbol>
    </m:order>
</m:placeOrder></soapenv:Body></soapenv:Envelope>
[2012-10-26 22:55:33,541]  INFO - LogMediator Transaction Action = Committed

How the implementation works

Let's investigate the elements of the ESB configuration in detail. The line numbers below are mapped with the ESB configuration illustrated in step 7 above.

  • class [line 11 in ESB config] - A Custom mediator called MessageCountMediator is loaded. This mediator keeps track of the number of messages that pass through the sequence it calls, by updating the value of a variable named MESSAGE_COUNT. 
  • switch [line 17 in ESB config] - The Switch mediator checks the value of MESSAGE_COUNT. 
  • case [line 19 in ESB config] - If the value of MESSAGE_COUNT is 1, then the transaction is considered to have failed, and no message will be put on the send channel. 
  • default [line 27 in ESB config] - The default action of the switch case flow control. This occurs when the MESSAGE_COUNT is anything but 1. The message is put on the send channel, and the transaction is considered a success. 
  • No labels