Publish-Subscribe with JMS
JMS supports two models for messaging as follows:
- Queues: point-to-point
- Topics: publish and subscribe
There are many business use cases that can be implemented using the publisher-subscriber (pub-sub) pattern. For example, consider a blog with subscribed readers. The blog author posts a blog entry that the subscribers of the blog can view. In other words, the blog author publishes a message (the blog post content) and the subscribers (the blog readers) receive that message. Popular publisher/subscriber patterns like these can be implemented using JMS topics as described in the following sections:
Scenario overview
In this sample scenario, you create a JMS topic in a broker server such as ActiveMQ or the Message Broker Profile of WSO2 Enterprise Integrator (WSO2 EI), and then you add proxy services using the ESB Profile of WSO2 EI to act as the publisher and subscribers. This example assumes you have already downloaded and installed the ESB Profile of WSO2 EI (see Installation Guide ).
Configuring the broker server
For this example, you will use ActiveMQ as the broker server. Follow the instructions in Configure with ActiveMQ to set up the ESB Profile of WSO2 EI with ActiveMQ as the broker.
Configuring the publisher
Open the
<EI_HOME>/conf/JNDI.properties
file and specify the JNDI designation of the topic (in this example it isSimpleStockQuoteService
):# register some queues in JNDI using the form # queue.[jndiName] = [physicalName] queue.MyQueue = example.MyQueue # register some topics in JNDI using the form # topic.[jndiName] = [physicalName] topic.MyTopic = example.MyTopic topic.SimpleStockQuoteService = SimpleStockQuoteService
Next, add a proxy service named
StockQuoteProxy
and configure it to publish to the topicSimpleStockQuoteService
. You can add the proxy service to the ESB either by building the proxy service in the design view via the Management Console of the ESB Profile or by copying the XML configuration into the source view. Alternatively, you can add an XML file namedStockQuoteProxy.xml
to the<EI_HOME>/repository/deployment/server/synapse-configs/default/proxy-services
. A sample XML code segment that defines the proxy service is given below. You will see that the address URI specifies properties to configure the JMS transport.<definitions xmlns="http://ws.apache.org/ns/synapse"> <proxy name="StockQuoteProxy" transports="http" startOnLoad="true" trace="disable"> <target> <endpoint> <address uri="jms:/SimpleStockQuoteService?transport.jms.ConnectionFactoryJNDIName=TopicConnectionFactory&java.naming.factory.initial=org.apache.activemq.jndi.ActiveMQInitialContextFactory&java.naming.provider.url=tcp://localhost:61616&transport.jms.DestinationType=topic"/> </endpoint> <inSequence> <property name="OUT_ONLY" value="true"/> </inSequence> <outSequence> <send/> </outSequence> </target> </proxy> </definitions>
Note that there are two ways to define the endpoint URL:
Specify the JNDI name of the JMS topic and the connection factory parameters in the connection URL as shown in the above example.
If you have already specified the endpoint's connection factory parameters (for the JMS sender configuration) in the
axis2.xml
file (stored in the<EI_HOME>/conf/axis2/
directory), the connection URL in the proxy service should be as shown below. In this example, the endpoint URL of the proxy service refers the relevant connection factory in the axis2.xml file:When the broker is ActiveMQjms:transport.jms.ConnectionFactory=QueueConnectionFactory
When the broker is WSO2 Message Brokerjms:/StockQuotesQueue?transport.jms.ConnectionFactory=QueueConnectionFactory
Be sure to replace the '
&
' character in the endpoint URL with '&
' to avoid the following exception:com.ctc.wstx.exc.WstxUnexpectedCharException: Unexpected character '=' (code 61); expected a semi-colon after the reference for entity 'java.naming.factory.initial' at [row,col {unknown-source}
Configuring the subscribers
Next, you need to configure two proxy services that subscribe to the JMS topic SimpleStockQuoteService
, so that whenever the topic receives a message, it is sent to the subscribing proxy services. Following is the sample configuration for the proxy services:
<definitions xmlns="http://ws.apache.org/ns/synapse"> <proxy name="SimpleStockQuoteService1" transports="jms" startOnLoad="true" trace="disable"> <description/> <target> <inSequence> <property name="OUT_ONLY" value="true"/> <log level="custom"> <property name="Subscriber1" value="I am Subscriber1"/> </log> <drop/> </inSequence> <outSequence> <send/> </outSequence> </target> <parameter name="transport.jms.ContentType"> <rules> <jmsProperty>contentType</jmsProperty> <default>application/xml</default> </rules> </parameter> <parameter name="transport.jms.ConnectionFactory">myTopicConnectionFactory</parameter> <parameter name="transport.jms.DestinationType">topic</parameter> <parameter name="transport.jms.Destination">SimpleStockQuoteService</parameter> </proxy> <proxy name="SimpleStockQuoteService2" transports="jms" startOnLoad="true" trace="disable"> <description/> <target> <inSequence> <property name="OUT_ONLY" value="true"/> <log level="custom"> <property name="Subscriber2" value="I am Subscriber2"/> </log> <drop/> </inSequence> <outSequence> <send/> </outSequence> </target> <parameter name="transport.jms.ContentType"> <rules> <jmsProperty>contentType</jmsProperty> <default>application/xml</default> </rules> </parameter> <parameter name="transport.jms.ConnectionFactory">myTopicConnectionFactory</parameter> <parameter name="transport.jms.DestinationType">topic</parameter> <parameter name="transport.jms.Destination">SimpleStockQuoteService</parameter> </proxy> </definitions>
Publishing to the topic
Open a command prompt (or a shell in Linux), go to the
<EI_HOME>\bin
directory and execute one of the following commands to start the ESB Profile of WSO2 EI:- On Windows:
integrator.bat --run
On Linux/Mac OS:
sh integrator.sh
- On Windows:
A log message similar to the following will appear:
INFO {org.wso2.andes.server.store.CassandraMessageStore} - Created Topic : SimpleStockQuoteService INFO {org.wso2.andes.server.store.CassandraMessageStore} - Registered Subscription tmp_127_0_0_1_44759_1 for Topic SimpleStockQuoteService
To invoke the publisher, use the sample
stock quote
client service by navigating to the<EI_HOME>/samples/axis2Client
directory and running the following command:ant stockquote -Daddurl=http://localhost:8280/services/StockQuoteProxy -Dmode=placeorder -Dsymbol=MSFT
The message flow is executed as follows:
When the
stockquote
client sends the message to the StockQuoteProxy service, the publisher is invoked and sends the message to the JMS topic.- The topic delivers the message to all the subscribers of that topic. In this case, the subscribers are ESB proxy services.