JMS Transport

The Java Message Service (JMS) transport in WSO2 Enterprise Integrator(WSO2 EI) allows you to easily send and receive messages to queues and topics of any JMS service that implements the JMS specification.

The JMS transport implementation comes from the WS-Commons Transports project, and it makes use of JNDI to connect to various JMS brokers. As a result, WSO2 EI can work with any JMS broker that offers JNDI support. All the relevant classes are packed into the axis2-transport-jms-<version>.jar and the classes org.apache.axis2.transport.jms.JMSListener and org.apache.axis2.transport.jms.JMSSender act as the transport receiver and sender respectively.

The JMS transport implementation requires an active JMS server instance to be able to receive and send messages. We recommend using WSO2 Message Broker or Apache ActiveMQ, but other implementations such as Apache Qpid and Tibco are also supported. For information on how to configure the JMS transport with the most common broker servers that can be integrated with WSO2 EI, see Configuring the JMS Transport.

JMS connection factory parameters

Configuration parameters for the JMS receiver and the sender are XML fragments that represent JMS connection factories. Following is a typical JMS configuration that uses WSO2 Message Broker as the message broker:

<parameter name="myTopicConnectionFactory">
      <parameter name="java.naming.factory.initial">org.wso2.andes.jndi.PropertiesFileInitialContextFactory</parameter>
      <parameter name="java.naming.provider.url">conf/jndi.properties</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
      <parameter name="transport.jms.ConnectionFactoryType">topic</parameter>
</parameter>

This is a bare minimal JMS connection factory configuration that consists of four connection factory parameters. The following table describes each JMS connection factory parameter in detail:

Tip

In transport parameter tables, literals displayed in italic mode under the Possible Values column should be considered as fixed literal constant values. Those values can be directly used in transport configurations.

Parameter Name	Description	Required	Possible Values	Default Value
`java.naming.factory.initial`	JNDI initial context factory class. The class must implement the `java.naming.spi.InitialContextFactory` interface.	Yes	A valid class name	org.apache.activemq.jndi.ActiveMQInitialContextFactory
`java.naming.provider.url`	URL of the JNDI provider.	Yes	A valid URL	tcp://localhost:61616
`java.naming.security.principal`	JNDI Username.	No
`java.naming.security.credentials`	JNDI password.	No
`transport.Transactionality`	Preferredmodeof transactionality. Note In WSO2 EI, JMS transactions only work with either the Callout mediator or the Call mediator in blocking mode.	No	none: Disables transactions in the JMS transport local: Enables local JMS session transactions jta: Enables global JTA transactions	none
`transport.UserTxnJNDIName`	JNDI name to be used to require user transaction.	No		java:comp/UserTransaction
`transport.CacheUserTxn`	Whether caching for user transactions should be enabled or not.	No	true, false	true
`transport.jms.SessionTransacted`	Whether the JMS session should be transacted or not.	No	true, false	true if transactionality is 'local'
`transport.jms.SessionAcknowledgement`	JMS session acknowledgment mode.	No	AUTO_ACKNOWLEDGE: The session automatically acknowledges the consumer receipt of messages when message processing has finished. CLIENT_ACKNOWLEDGE: The consumer acknowledges all messages delivered so far by the session. If the consumer falls behind in its processing, a large number of unacknowledged messages can build up. DUPS_OK_ACKNOWLEDGE: The session lazily acknowledges the delivery of messages to the consumer. Lazy means that the consumer can delay acknowledgement to the server until a convenient time. During a delay, the server might redeliver messages. This mode reduces session overhead but the consumer can receive duplicate messages should JMS fail, SESSION_TRANSACTED: The session is a related group of consumed or produced messages that are treated as a single unit of work. Also see JMS Message Delivery Reliability and Acknowledgement Patterns.	AUTO_ACKNOWLEDGE
`transport.jms.ConnectionFactoryJNDIName`	The JNDI name of the connection factory.	Yes	QueueConnectionFactory, TopicConnectionFactory	ConnectionFactory
`transport.jms.ConnectionFactoryType`	Type of the connection factory.	No	queue, topic	queue
`transport.jms.JMSSpecVersion`	JMS API version.	No	1.1, 1.0.2b	1.1
`transport.jms.UserName`	The JMS connection username.	No
`transport.jms.Password`	The JMS connection password.	No
`transport.jms.Destination`	The JNDI name of the destination.	No		Defaultstoservicename
`transport.jms.DestinationType`	Type of the destination.	No	queue, topic	queue
`transport.jms.DefaultReplyDestination`	JNDI name of the default reply destination.	No
`transport.jms.DefaultReplyDestinationType`	Type of the reply destination.	No	queue, topic	Defaults to the type of the destination
`transport.jms.MessageSelector`	Message selector implementation.	No
`transport.jms.SubscriptionDurable`	Whether the connection factory is subscription durable or not.	No	true, false	false
`transport.jms.DurableSubscriberClientID`	The `ClientId` parameter when using durable subscriptions	Required if the value specified as `transport.jms.SubscriptionDurable` is `true`.
`transport.jms.DurableSubscriberName`	The name of the durable subscriber.	Required if the value specified as `transport.jms.SubscriptionDurable` is `true` .
`transport.jms.PubSubNoLocal`	Whether the messages should be published by the same connection they were received.	No	true, false	false
`transport.jms.CacheLevel`	The cache level, with which JMS objects should be cached at startup. You can configure this in the `<EI_HOME>/conf/axis2/axis2.xml` file. Following are the possible values for this parameter and the description of each: none - None of the JMS objects will be cached. connection - JMS connection objects will be cached. session - JMS connection and session objects will be cached. consumer - JMS connection, session and consumer objects will be cached. producer - JMS connection, session and producer objects will be cached. auto - An appropriate cache level will be used based on the transaction strategy. The following is available as a WUM update for WSO2 EI from the 8th of August, 2018: In addition to defining the cache level in the axis2.xml file, you can define it in the endpoint reference from a proxy service as shown below: <endpoint> <address uri="jms:/example.MyQueue?transport.jms.ConnectionFactoryJNDIName=QueueConnectionFactory&java.naming.factory.initial=org.wso2.andes.jndi.PropertiesFileInitialContextFactory&java.naming.provider.url=repository/conf/jndi.properties&transport.jms.DestinationType=queue&transport.jms.CacheLevel=producer"/> </endpoint> See the instructions for getting WUM updates.	No	none, connection, session, consumer, producer, auto	auto
`transport.jms.ReceiveTimeout`	Time to wait for a JMS message during polling. Set this parameter value to a negative integer to wait indefinitely. Set to zero to prevent waiting.	No	Number of milliseconds to wait	1000 ms
`transport.jms.ConcurrentConsumers`	Numberofconcurrent threads to be started to consume messages when polling.	No	Any positive integer - Fortopicsthis must be always 1	1
`transport.jms.MaxConcurrentConsumers`	Maximumnumberof concurrent threads to use during polling.	No	Any positive integer - Fortopicsthis must be always 1	1
`transport.jms.IdleTaskLimit`	The number of idle runs per thread before it dies out.	No	Any positive integer	10
`transport.jms.MaxMessagesPerTask`	The maximum number of successful message receipts per thread.	No	Any positive integer - Use -1 to indicate infinity	-1
`transport.jms.InitialReconnectDuration`	Initial reconnection attempts duration in milliseconds.	No	Any positive integer	10000 ms
`transport.jms.ReconnectProgressFactor`	Factor by which the reconnection duration will be increased.	No	Any positive integer	2
`transport.jms.MaxReconnectDuration`	Maximum reconnection duration in milliseconds.	No		3600000 ms (1 hr)
`transport.jms.ReconnectInterval`	Reconnection interval in milliseconds.	No		>3600000 ms (1 hr)
`transport.jms.MaxJMSConnections`	Maximum cached JMS connections in the producer level.	No	Any positive integer value	10
`transport.jms.MaxConsumeErrorRetriesBeforeDelay`	Numberofretries on consume errors before sleep delay kicks in.	No	Any positive integer value	20
`transport.jms.ConsumeErrorDelay`	Sleep delay whenaconsumeerroris encountered (in milliseconds).	No	Any positive integer value	100 ms
`transport.jms.ConsumeErrorProgression`	Factor by which the consume error retry sleep will be increased.	No	Any positive integer value	2.0
`transport.jms.MaxConsumeErrorRetryCount`	The maximum number of times the consumer should retry upon receiving a consumer error. You need to introduce this parameter only if the Broker has issues in notifying the Exception Listeners about the exceptions occurred.	No	Any positive integer value	-1

JMS transport implementation has some parameters that should be configured at service level. For example, parameters that should be configured in the service XML files of individual services.

Service level JMS configuration parameters

Following are some of the common parameters you can configure at the service level.

Parameter Name	Description	Required	Possible Values
`transport.jms.ConnectionFactory`	Name of the JMS connection factory the service should use.	No	A name of an already defined connection factory
`transport.jms.PublishEPR`	JMS EPR to be published in the WSDL.	No	A JMS EPR
`transport.jms.ContentType`	Specifies how the transport listener should determine the content type of received messages.	No	A simple string value, in which case the transport listener assumes that the received messages always have the specified content type, or a set of rules. For more information, see http://axis.apache.org/axis2/java/transports/jms.html#Service_configuration.
`transport.jms.MessagePropertyHyphens`	Specifies the action to be taken when there are JMS Message property names that contain hyphens.	No	`none` - No action will be taken. This is the default value. `replace` - Transport headers with hyphens will be replaced before adding them as JMS message properties, and if WSO2 EI is the consumer, hyphens will be reintroduced on message retrieval. `delete` - Transport headers with hyphens will be deleted.

When reconnecting back to the JMS provider, the JMS transport will spawn multiple threads and once connected the additional threads will get closed. Hence, you will see below log for a particular service multiple times.

"INFO - ServiceTaskManager Reconnection attempt: N for service:Y was successful!"

For more information, see JMS Support.

For information on how to tune the JMS transport for better performance, see Tuning the JMS Transport.